On 23.04.2012 10:55, Stefano Babic wrote:
> Instead of using CONFIG_MII or CONFIG_RMII, we can make use of
> CONFIG_FEC_XCV_TYPE, as it was already introduced, but making it
> consistent for all boards.
Second for that.
--
Timo
___
U-Boot mailing list
On 20/04/2012 10:54, Timo Ketola wrote:
>> as far as I can see, there are some inconsistencies. All boards define
>> CONFIG_MII, but they really need CONFIG_RMII, because only with my last
>> patch I set the gasket for MII. The driver has always set in a fixed way
>> the gasket for RMII, independen
Dear Stefano, Troy, Scott,
On 20.04.2012 10:30, Stefano Babic wrote:
On 20/04/2012 06:35, Timo Ketola wrote:
[undeleted Stefano from CC-list]
Hi Timo, hi Troy,
On 20.04.2012 00:23, Troy Kisky wrote:
On 4/19/2012 2:13 PM, Troy Kisky wrote:
On 4/19/2012 1:18 PM, Timo Ketola wrote:
On 19.0
On 20/04/2012 06:35, Timo Ketola wrote:
> [undeleted Stefano from CC-list]
>
Hi Timo, hi Troy,
> On 20.04.2012 00:23, Troy Kisky wrote:
>> On 4/19/2012 2:13 PM, Troy Kisky wrote:
>>> On 4/19/2012 1:18 PM, Timo Ketola wrote:
On 19.04.2012 22:27, Troy Kisky wrote:
> On 4/19/2012 1:55 AM,
[undeleted Stefano from CC-list]
On 20.04.2012 00:23, Troy Kisky wrote:
On 4/19/2012 2:13 PM, Troy Kisky wrote:
On 4/19/2012 1:18 PM, Timo Ketola wrote:
On 19.04.2012 22:27, Troy Kisky wrote:
On 4/19/2012 1:55 AM, Timo Ketola wrote:
-#if !defined(CONFIG_MII)
- /* configure gasket for RMII, 5
[undeleted Stefano from CC-list]
On 20.04.2012 00:28, Troy Kisky wrote:
On 4/19/2012 1:55 AM, Timo Ketola wrote:
...
+ if (speed != _10BASET)
...
Can you fix 10BASET for non-reduced pin count boards as well?
Are they broken? How? If they are, I'm afraid I don't have a board to test.
--
T
On 4/19/2012 1:55 AM, Timo Ketola wrote:
Gasket needs a different configuration for 10BaseT than for higher
speeds.
Signed-off-by: Timo Ketola
---
Changes in v4:
- Rewrapped commit message
Changes in v2:
- Dropped patches 2 and 3 so this one changed from 5 to 3
- Rebased to u-boot-imx next
- R
On 4/19/2012 2:13 PM, Troy Kisky wrote:
On 4/19/2012 1:18 PM, Timo Ketola wrote:
On 19.04.2012 22:27, Troy Kisky wrote:
On 4/19/2012 1:55 AM, Timo Ketola wrote:
-#if !defined(CONFIG_MII)
- /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
- writew(MIIGSK_CFGR_IF_MODE_RMII,&fec-
On 4/19/2012 1:18 PM, Timo Ketola wrote:
On 19.04.2012 22:27, Troy Kisky wrote:
On 4/19/2012 1:55 AM, Timo Ketola wrote:
-#if !defined(CONFIG_MII)
- /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
- writew(MIIGSK_CFGR_IF_MODE_RMII,&fec->eth->miigsk_cfgr);
+#if defined(CONFIG_R
On 19.04.2012 22:27, Troy Kisky wrote:
On 4/19/2012 1:55 AM, Timo Ketola wrote:
-#if !defined(CONFIG_MII)
- /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
- writew(MIIGSK_CFGR_IF_MODE_RMII,&fec->eth->miigsk_cfgr);
+#if defined(CONFIG_RMII)
While this change seems to make sen
On 4/19/2012 1:55 AM, Timo Ketola wrote:
Gasket needs a different configuration for 10BaseT than for higher
speeds.
Signed-off-by: Timo Ketola
---
Changes in v4:
- Rewrapped commit message
Changes in v2:
- Dropped patches 2 and 3 so this one changed from 5 to 3
- Rebased to u-boot-imx next
- R
On 19/04/2012 10:55, Timo Ketola wrote:
> Gasket needs a different configuration for 10BaseT than for higher
> speeds.
>
> Signed-off-by: Timo Ketola
> ---
>
Acked-by: Stefano Babic
Best regards,
Stefano Babic
--
=
DENX Sof
Gasket needs a different configuration for 10BaseT than for higher
speeds.
Signed-off-by: Timo Ketola
---
Changes in v4:
- Rewrapped commit message
Changes in v2:
- Dropped patches 2 and 3 so this one changed from 5 to 3
- Rebased to u-boot-imx next
- Removed the remove of 'miiphy_duplex' call
13 matches
Mail list logo