The common.c file content can be safely moved to spl.c file after
performing the DM/DTS conversion for the U-Boot proper.
It contains the non DM/DTS setup code, which now is only used by SPL.
Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
Changes in v2: None
board/liebherr/display5/Makefile | 4 +-
board/liebherr/display5/common.c | 83 ----------------------------------------
board/liebherr/display5/common.h | 5 ---
board/liebherr/display5/spl.c | 74 +++++++++++++++++++++++++++++++++++
4 files changed, 76 insertions(+), 90 deletions(-)
delete mode 100644 board/liebherr/display5/common.c
diff --git a/board/liebherr/display5/Makefile b/board/liebherr/display5/Makefile
index f934672428ab..ee503add75d3 100644
--- a/board/liebherr/display5/Makefile
+++ b/board/liebherr/display5/Makefile
@@ -5,7 +5,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
ifdef CONFIG_SPL_BUILD
-obj-y = common.o spl.o
+obj-y = spl.o
else
-obj-y := common.o display5.o
+obj-y := display5.o
endif
diff --git a/board/liebherr/display5/common.c b/board/liebherr/display5/common.c
deleted file mode 100644
index 5e714076a49c..000000000000
--- a/board/liebherr/display5/common.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017 DENX Software Engineering
- * Lukasz Majewski, DENX Software Engineering, lu...@denx.de
- */
-
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/arch/mx6-pins.h>
-#include "common.h"
-
-iomux_v3_cfg_t const uart_console_pads[] = {
- /* UART5 */
- MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-void displ5_set_iomux_uart_spl(void)
-{
- SETUP_IOMUX_PADS(uart_console_pads);
-}
-
-iomux_v3_cfg_t const misc_pads_spl[] = {
- /* Emergency recovery pin */
- MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-void displ5_set_iomux_misc_spl(void)
-{
- SETUP_IOMUX_PADS(misc_pads_spl);
-}
-
-#ifdef CONFIG_MXC_SPI
-iomux_v3_cfg_t const ecspi2_pads[] = {
- /* SPI2, NOR Flash nWP, CS0 */
- MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
- MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
- MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
-{
- if (bus != 1 || cs != 0)
- return -EINVAL;
-
- return IMX_GPIO_NR(5, 29);
-}
-
-void displ5_set_iomux_ecspi_spl(void)
-{
- SETUP_IOMUX_PADS(ecspi2_pads);
-}
-
-#else
-void displ5_set_iomux_ecspi_spl(void) {}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-iomux_v3_cfg_t const usdhc4_pads[] = {
- MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NANDF_ALE__SD4_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-void displ5_set_iomux_usdhc_spl(void)
-{
- SETUP_IOMUX_PADS(usdhc4_pads);
-}
-
-#else
-void displ5_set_iomux_usdhc_spl(void) {}
-#endif
diff --git a/board/liebherr/display5/common.h b/board/liebherr/display5/common.h
index 4eb70dc42fb6..44c7470074ce 100644
--- a/board/liebherr/display5/common.h
+++ b/board/liebherr/display5/common.h
@@ -31,9 +31,4 @@
#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-void displ5_set_iomux_uart_spl(void);
-void displ5_set_iomux_ecspi_spl(void);
-void displ5_set_iomux_usdhc_spl(void);
-void displ5_set_iomux_misc_spl(void);
-
#endif /* __DISPL5_COMMON_H_ */
diff --git a/board/liebherr/display5/spl.c b/board/liebherr/display5/spl.c
index 354b63e431f6..311edaf939cc 100644
--- a/board/liebherr/display5/spl.c
+++ b/board/liebherr/display5/spl.c
@@ -104,6 +104,80 @@ static const struct mx6_ddr3_cfg mt41k128m16jt_125 = {
.trasmin = 3500,
};
+iomux_v3_cfg_t const uart_console_pads[] = {
+ /* UART5 */
+ MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+void displ5_set_iomux_uart_spl(void)
+{
+ SETUP_IOMUX_PADS(uart_console_pads);
+}
+
+iomux_v3_cfg_t const misc_pads_spl[] = {
+ /* Emergency recovery pin */
+ MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+void displ5_set_iomux_misc_spl(void)
+{
+ SETUP_IOMUX_PADS(misc_pads_spl);
+}
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi2_pads[] = {
+ /* SPI2, NOR Flash nWP, CS0 */
+ MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
+{
+ if (bus != 1 || cs != 0)
+ return -EINVAL;
+
+ return IMX_GPIO_NR(5, 29);
+}
+
+void displ5_set_iomux_ecspi_spl(void)
+{
+ SETUP_IOMUX_PADS(ecspi2_pads);
+}
+
+#else
+void displ5_set_iomux_ecspi_spl(void) {}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_NANDF_ALE__SD4_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+void displ5_set_iomux_usdhc_spl(void)
+{
+ SETUP_IOMUX_PADS(usdhc4_pads);
+}
+
+#else
+void displ5_set_iomux_usdhc_spl(void) {}
+#endif
+
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
