This commit updates the display5_factory_defconfig file after the switch to DM/DTS for this board.
Moreover, the VID and PID for SPL running SDP gadget have been updated to allow seamless work with 'uuu' utility from NXP (the imx_usb doesn't work properly after embedding the u-boot proper into fitImage - problem with IVT embedding in FIT). Example to use 'uuu' session: cat << EOF > display5_recovery.lst uuu_version 1.2.135 SDP: boot -f /srv/tftp/SPL SDPU: write -f /srv/tftp/u-boot-dtb.img -addr 0x10000000 SDPU: jump -addr 0x10000000 SDPU: done EOF sudo ./uuu/uuu display5_recovery.lst Signed-off-by: Lukasz Majewski <lu...@denx.de> --- Changes in v2: None configs/display5_factory_defconfig | 41 ++++++++++++++++++++++++++++++++++---- 1 file changed, 37 insertions(+), 4 deletions(-) diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index c467e8c92890..b4b030a32b76 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -4,13 +4,19 @@ CONFIG_SYS_TEXT_BASE=0x17800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x1000 +CONFIG_MX6_DDRCAL=y CONFIG_TARGET_DISPLAY5=y +CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y +CONFIG_SPL_TEXT_BASE=0x00908000 CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg,MX6Q" CONFIG_BOOTDELAY=3 @@ -19,8 +25,6 @@ CONFIG_BOOTCOMMAND="echo SDP Display5 recovery" CONFIG_SUPPORT_RAW_INITRD=y CONFIG_MISC_INIT_R=y CONFIG_BOUNCE_BUFFER=y -CONFIG_SPL_TEXT_BASE=0x00908000 -# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y @@ -47,11 +51,14 @@ CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB_SDP=y +CONFIG_CMD_WDT=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y @@ -67,26 +74,52 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-display5" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x2 +CONFIG_SYS_I2C_MXC=y +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x50 +CONFIG_SYS_I2C_EEPROM_BUS=2 +CONFIG_SYS_EEPROM_SIZE=32768 +CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5 +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_USDHC=y CONFIG_MTD_DEVICE=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_BUS=1 CONFIG_SF_DEFAULT_MODE=0 CONFIG_SF_DEFAULT_SPEED=50000000 +CONFIG_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_MTD=y CONFIG_PHYLIB=y +CONFIG_PHY_MARVELL=y CONFIG_FEC_MXC=y CONFIG_MII=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y CONFIG_MXC_UART=y CONFIG_SPI=y CONFIG_MXC_SPI=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_WATCHDOG=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Liebherr" -CONFIG_USB_GADGET_VENDOR_NUM=0x1b67 -CONFIG_USB_GADGET_PRODUCT_NUM=0x4000 +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_I2C_EDID=y CONFIG_IMX_WATCHDOG=y +CONFIG_PANIC_HANG=y -- 2.11.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
