This patch adds a SPI driver for the Marvell Kirkwood SoC's.

Signed-off-by: Prafulla Wadaskar <prafu...@marvell.com>
---
Change log:
v2: White space in debug print removed

 drivers/spi/Makefile                |    1 +
 drivers/spi/kirkwood_spi.c          |  185 +++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-kirkwood/spi.h |   56 +++++++++++
 3 files changed, 242 insertions(+), 0 deletions(-)
 create mode 100644 drivers/spi/kirkwood_spi.c
 create mode 100644 include/asm-arm/arch-kirkwood/spi.h

diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 1350f3e..7ffa47d 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -28,6 +28,7 @@ LIB   := $(obj)libspi.a
 COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
 COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
 COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
 COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
 COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
 COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
new file mode 100644
index 0000000..a1c3070
--- /dev/null
+++ b/drivers/spi/kirkwood_spi.c
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/spi.h>
+#include <asm/arch/mpp.h>
+
+static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE;
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+                               unsigned int max_hz, unsigned int mode)
+{
+       struct spi_slave *slave;
+       u32 data;
+       u32 kwspi_mpp_config[] = {
+               MPP0_GPIO,
+               MPP7_SPI_SCn,
+               0
+       };
+
+       if (!spi_cs_is_valid(bus, cs))
+               return NULL;
+
+       slave = malloc(sizeof(struct spi_slave));
+       if (!slave)
+               return NULL;
+
+       slave->bus = bus;
+       slave->cs = cs;
+
+       writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl);
+
+       /* calculate spi clock prescaller using max_hz */
+       data = ((CONFIG_SYS_TCLK / 2) / max_hz) & KWSPI_CLKPRESCL_MASK;
+       data |= 0x10;
+
+       /* program spi clock prescaller using max_hz */
+       writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg);
+       debug("data = 0x%08x\n", data);
+
+       writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause);
+       writel(KWSPI_IRQMASK, spireg->irq_mask);
+
+       /* program mpp registers to select  SPI_CSn */
+       if (cs) {
+               kwspi_mpp_config[0] = MPP0_GPIO;
+               kwspi_mpp_config[1] = MPP7_SPI_SCn;
+       } else {
+               kwspi_mpp_config[0] = MPP0_SPI_SCn;
+               kwspi_mpp_config[1] = MPP7_GPO;
+       }
+       kirkwood_mpp_conf(kwspi_mpp_config);
+
+       return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+       free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+       return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+#ifndef CONFIG_SPI_CS_IS_VALID
+/*
+ * you can define this function board specific
+ * define above CONFIG in board specific config file and
+ * provide the function in board specific src file
+ */
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+       return (bus == 0 && (cs == 0 || cs == 1));
+}
+#endif
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+       writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+       writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+            void *din, unsigned long flags)
+{
+       unsigned int tmpdout, tmpdin;
+       int tm, isread = 0;
+
+       debug("spi_xfer: slave %u:%u dout %08X din %08X bitlen %u\n",
+             slave->bus, slave->cs, dout, din, bitlen);
+
+       if (flags & SPI_XFER_BEGIN)
+               spi_cs_activate(slave);
+
+       /*
+        * handle data in 8-bit chunks
+        * TBD: 2byte xfer mode to be enabled
+        */
+       writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) |
+               KWSPI_XFERLEN_1BYTE), &spireg->cfg);
+
+       while (bitlen > 4) {
+               debug("loopstart bitlen %d\n", bitlen);
+               tmpdout = 0;
+
+               /* Shift data so it's msb-justified */
+               if (dout)
+                       tmpdout = *(u32 *) dout & 0x0ff;
+
+               writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause);
+               writel(tmpdout, &spireg->dout); /* Write the data out */
+               debug("*** spi_xfer: ... %08x written, bitlen %d\n",
+                     tmpdout, bitlen);
+
+               /*
+                * Wait for SPI transmit to get out
+                * or time out (1 second = 1000 ms)
+                * The NE event must be read and cleared first
+                */
+               for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
+                       if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) {
+                               isread = 1;
+                               tmpdin = readl(&spireg->din);
+                               debug
+                                       ("spi_xfer: din %08x..%08x read\n",
+                                       din, tmpdin);
+
+                               if (din) {
+                                       *((u8 *) din) = (u8) tmpdin;
+                                       din += 1;
+                               }
+                               if (dout)
+                                       dout += 1;
+                               bitlen -= 8;
+                       }
+                       if (isread)
+                               break;
+               }
+               if (tm >= KWSPI_TIMEOUT)
+                       printf("*** spi_xfer: Time out during SPI transfer\n");
+
+               debug("loopend bitlen %d\n", bitlen);
+       }
+
+       if (flags & SPI_XFER_END)
+               spi_cs_deactivate(slave);
+
+       return 0;
+}
diff --git a/include/asm-arm/arch-kirkwood/spi.h 
b/include/asm-arm/arch-kirkwood/spi.h
new file mode 100644
index 0000000..1d5043f
--- /dev/null
+++ b/include/asm-arm/arch-kirkwood/spi.h
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafu...@marvell.com>
+ *
+ * Derived from drivers/spi/mpc8xxx_spi.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __KW_SPI_H__
+#define __KW_SPI_H__
+
+/* SPI Registers on kirkwood SOC */
+struct kwspi_registers {
+       u32 ctrl;       /* 0x10600 */
+       u32 cfg;        /* 0x10604 */
+       u32 dout;       /* 0x10608 */
+       u32 din;        /* 0x1060c */
+       u32 irq_cause;  /* 0x10610 */
+       u32 irq_mask;   /* 0x10614 */
+};
+
+#define KWSPI_CLKPRESCL_MASK   0x1f
+#define KWSPI_CSN_ACT          1 /* Activates serial memory interface */
+#define KWSPI_SMEMRDY          (1 << 1) /* SerMem Data xfer ready */
+#define KWSPI_IRQUNMASK                1 /* unmask SPI interrupt */
+#define KWSPI_IRQMASK          0 /* mask SPI interrupt */
+#define KWSPI_SMEMRDIRQ                1 /* SerMem data xfer ready irq */
+#define KWSPI_XFERLEN_1BYTE    0
+#define KWSPI_XFERLEN_2BYTE    (1 << 5)
+#define KWSPI_XFERLEN_MASK     (1 << 5)
+#define KWSPI_ADRLEN_1BYTE     0
+#define KWSPI_ADRLEN_2BYTE     1 << 8
+#define KWSPI_ADRLEN_3BYTE     2 << 8
+#define KWSPI_ADRLEN_4BYTE     3 << 8
+#define KWSPI_ADRLEN_MASK      3 << 8
+#define KWSPI_TIMEOUT          10000
+
+#endif /* __KW_SPI_H__ */
-- 
1.5.3.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to