To: Schleifer, Alexander
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH v2a] AT91: add SD/MMC support
Dear Schleifer, Alexander,
But I found out, that the AT91Bootstrap initialization impacts
the U-Boot code. If I use the AT91Bootstrap (without mci initialization)
from NAND flash, the mmc
Dear Schleifer, Alexander,
Hello Reinhard,
thanks for your reply.
I checked the register settings and sorted out, that the SDCBUS was
initialized in 4-bit mode by the bootstrap.
So I added the explicit initialization when port A is used:
#if defined(CONFIG_ATMEL_MCI_PORTB)
-elektronik.de]
Sent: Friday, August 13, 2010 8:32 PM
To: Schleifer, Alexander
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH v2a] AT91: add SD/MMC support
Dear Schleifer, Alexander,
Thanks for your reply...
The CID part is:
mmc: response: 1a50514d 53202020 1018301a ec007b8b
Manufacturer ID
me out.
Best regards,
Alex
-Original Message-
From: Xu, Hong [mailto:hong...@atmel.com]
Sent: Monday, August 16, 2010 4:04 AM
To: Schleifer, Alexander
Cc: u-boot@lists.denx.de; u-b...@emk-elektronik.de
Subject: RE: [U-Boot] [PATCH v2a] AT91: add SD/MMC support
Hi Alex,
Thanks to Reinhard
Dear Schleifer, Alexander,
But I found out, that the AT91Bootstrap initialization impacts
the U-Boot code. If I use the AT91Bootstrap (without mci initialization)
from NAND flash, the mmc init command successfully reads the card.
It fails if I use the AT91Bootstrap with mci initialization.
Dear Reinhard Meyer,
In message 4c690fec.6040...@emk-elektronik.de you wrote:
Dear Schleifer, Alexander,
But I found out, that the AT91Bootstrap initialization impacts
the U-Boot code. If I use the AT91Bootstrap (without mci initialization)
from NAND flash, the mmc init command
Wolfgang Denk wrote:
Dear Reinhard Meyer,
In message 4c690fec.6040...@emk-elektronik.de you wrote:
Dear Schleifer, Alexander,
But I found out, that the AT91Bootstrap initialization impacts
the U-Boot code. If I use the AT91Bootstrap (without mci initialization)
from NAND flash, the mmc
Dear Reinhard Meyer,
In message 4c691822.8050...@emk-elektronik.de you wrote:
Please fix your mailer. Your quoting is seriously broken!
No, its not. I manually added breaks to that line because it was not
wrapped at all - and I did not bother to add extra s.
I wrote Your quoting is
-Original Message-
From: u-boot-boun...@lists.denx.de
[mailto:u-boot-boun...@lists.denx.de] On Behalf Of asc0
Sent: 2010?8?13? 18:19
To: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH v2a] AT91: add SD/MMC support
Hello! I have successfully applied your patch on a
AT91SAM9G20 cpu
Dear Schleifer, Alexander,
If you have two days patience, wait for the new driver, I will be
most happy to have a tester ;)
TOP9000 mmci
mci: setting clock 194000 Hz, block size 512
mci: setting clock 24832000 Hz, block size 512
mci: setting clock 194000 Hz, block size 512
mci: setting clock
Hello! I have successfully applied your patch on a AT91SAM9G20 cpu and it
reads the correct CID CSD info.
At the end of initialization the bread function fails with the following
error:
mmc: bread failed, status = 0040c0e5, card status = 0900
Does someone else received this error or have a
asc0 wrote:
Hello! I have successfully applied your patch on a AT91SAM9G20 cpu and it
reads the correct CID CSD info.
At the end of initialization the bread function fails with the following
error:
mmc: bread failed, status = 0040c0e5, card status = 0900
Does someone else received
Meyer [mailto:u-b...@emk-elektronik.de]
Sent: Friday, August 13, 2010 1:17 PM
To: Schleifer, Alexander
Cc: u-boot@lists.denx.de
Subject: Re: [U-Boot] [PATCH v2a] AT91: add SD/MMC support
asc0 wrote:
Hello! I have successfully applied your patch on a AT91SAM9G20 cpu and
it reads the correct CID
Dear Schleifer, Alexander,
Thanks for your reply...
The CID part is:
mmc: response: 1a50514d 53202020 1018301a ec007b8b
Manufacturer ID: 1A
OEM/Application ID:5051
Product name: MS
Product Revision: 1.0
Product Serial Number: 405805804
Manufacturing Date:
Disregard this patch, please.
I found a better solution based on Rob Emanuele's work,
it will be presented as a patch soon.
Reinhard
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
This patch adds support for the Atmel MultiMedia Card Interface (MCI)
in AT91SAM9260 and AT91SAM9XE SoCs and preserves the original support
for the AVR32AP700x SoCs.
It patches the original atmel_mci.c driver to remove byte order and
toolchain dependencies and makes it a common MCI driver for
Xu, Hong wrote:
Hi Reinhard,
To format the SD card, I did following
8
# dd if=/dev/zero of=/dev/sdc bs=512 count=10
# mke2fs /dev/sdc
# mount /dev/sdc /mnt/ext2disk
# '' copy some files to /mnt/ext2disk
8
I guess you tested fatls or fatload or fatinfo or ext2ls,
Xu, Hong wrote:
Hi Reinhard,
In Linux, I used `fdisk' to cerate 2 primiary partitions on SD card, each is
about 1G bytes.
I used `mkfs.ext2 /dev/sdc1' and 'mkfs.ext2 /dev/sd2' to format the 2
partitions and then copy some files on them.
I used SanDisk 2GB SD Card.
But in U-Boot,
18 matches
Mail list logo