From: Philippe Schenker <philippe.schen...@toradex.com>
Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
SOC to request for a lower voltage during sleep. This is necessary
because the voltage is changing too slow for the SOC to wake up
properly.
Signed-off-by: Philippe Schenker <philippe.schen...@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opan...@toradex.com>
---
Changes in v3: None
Changes in v2:
- Added Igor's reviewed-by.
board/toradex/colibri-imx6ull/colibri-imx6ull.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index b6f45edb86..f1d5cc6655 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -50,6 +50,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \
PAD_CTL_DSE_48ohm)
+#define MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR 0x2290040
+
#define NAND_PAD_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_SRE_SLOW | PAD_CTL_HYS)
#define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
@@ -331,6 +333,14 @@ int board_late_init(void)
env_set("variant", "-wifi");
#endif
+ /*
+ * Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
+ * SOC to request for a lower voltage during sleep. This is necessary
+ * because the voltage is changing too slow for the SOC to wake up
+ * properly.
+ */
+ __raw_writel(0x8080, MX6_PAD_SNVS_PMIC_STBY_REQ_ADDR);
+
#ifdef CONFIG_CMD_BMODE
add_board_boot_modes(board_boot_modes);
#endif
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
