The Allwinner H5 is very close to the H3 SoC, but has ARMv8 cores.
To allow sharing the clocks, GPIO and driver code easily, create an
architecture agnostic MACH_SUNXI_H3_H5 Kconfig symbol.
Rename the existing symbol to MACH_SUNXI_H3_H5 where code is shared and
let it be selected by a new shared Kconfig option.
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Acked-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 4 ++--
arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 ++--
arch/arm/include/asm/arch-sunxi/dram.h | 2 +-
arch/arm/mach-sunxi/Makefile | 2 +-
arch/arm/mach-sunxi/board.c | 2 +-
arch/arm/mach-sunxi/clock_sun6i.c | 6 +++---
arch/arm/mach-sunxi/usb_phy.c | 4 ++--
board/sunxi/Kconfig | 14 +++++++++-----
drivers/mtd/spi/Kconfig | 2 +-
drivers/net/sun8i_emac.c | 2 +-
drivers/power/Kconfig | 4 ++--
drivers/usb/host/ehci-sunxi.c | 2 +-
12 files changed, 26 insertions(+), 22 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 3f87672..1bfb48b 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -242,7 +242,7 @@ struct sunxi_ccm_reg {
/* ahb_gate0 offsets */
#define AHB_GATE_OFFSET_USB_OHCI1 30
#define AHB_GATE_OFFSET_USB_OHCI0 29
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
@@ -293,7 +293,7 @@ struct sunxi_ccm_reg {
#define CCM_USB_CTRL_PHY1_CLK (0x1 << 9)
#define CCM_USB_CTRL_PHY2_CLK (0x1 << 10)
#define CCM_USB_CTRL_PHY3_CLK (0x1 << 11)
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are OHCI1 - OHCI3 in the datasheet (OHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index 3c85222..ea672fe 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -56,7 +56,7 @@
#define SUNXI_USB2_BASE 0x01c1c000
#endif
#ifdef CONFIG_SUNXI_GEN_SUN6I
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#define SUNXI_USBPHY_BASE 0x01c19000
#define SUNXI_USB0_BASE 0x01c1a000
#define SUNXI_USB1_BASE 0x01c1b000
@@ -94,7 +94,7 @@
#define SUNXI_KEYPAD_BASE 0x01c23000
#define SUNXI_TZPC_BASE 0x01c23400
-#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \
+#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUNXI_H3_H5) || \
defined(CONFIG_MACH_SUN50I)
/* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */
#define SUNXI_SIDC_BASE 0x01c14000
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h
b/arch/arm/include/asm/arch-sunxi/dram.h
index 53e6d47..1dc8220 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -24,7 +24,7 @@
#include <asm/arch/dram_sun8i_a33.h>
#elif defined(CONFIG_MACH_SUN8I_A83T)
#include <asm/arch/dram_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
#include <asm/arch/dram_sun8i_h3.h>
#elif defined(CONFIG_MACH_SUN9I)
#include <asm/arch/dram_sun9i.h>
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 7daba11..efab481 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -48,7 +48,7 @@ obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
-obj-$(CONFIG_MACH_SUN8I_H3) += dram_sun8i_h3.o
+obj-$(CONFIG_MACH_SUNXI_H3_H5) += dram_sun8i_h3.o
obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
obj-$(CONFIG_MACH_SUN50I) += dram_sun8i_h3.o
endif
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 96764d1..5e03d03 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -98,7 +98,7 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN8I_A33_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(1), SUNXI_GPIO_PULL_UP);
-#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_H3)
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUNXI_H3_H5)
sunxi_gpio_set_cfgpin(SUNXI_GPA(4), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPA(5), SUN8I_H3_GPA_UART0);
sunxi_gpio_set_pull(SUNXI_GPA(5), SUNXI_GPIO_PULL_UP);
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c
b/arch/arm/mach-sunxi/clock_sun6i.c
index d123b3a..4762fbf 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -22,7 +22,7 @@ void clock_init_safe(void)
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-#if !defined(CONFIG_MACH_SUN8I_H3) && !defined(CONFIG_MACH_SUN50I)
+#if !defined(CONFIG_MACH_SUNXI_H3_H5) && !defined(CONFIG_MACH_SUN50I)
struct sunxi_prcm_reg * const prcm =
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
@@ -51,7 +51,7 @@ void clock_init_safe(void)
void clock_init_sec(void)
{
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -152,7 +152,7 @@ void clock_set_pll5(unsigned int clk, bool
sigma_delta_enable)
const int max_n = 32;
int k = 1, m = 2;
-#ifdef CONFIG_MACH_SUN8I_H3
+#ifdef CONFIG_MACH_SUNXI_H3_H5
clrsetbits_le32(&ccm->pll5_tuning_cfg, CCM_PLL5_TUN_LOCK_TIME_MASK |
CCM_PLL5_TUN_INIT_FREQ_MASK,
CCM_PLL5_TUN_LOCK_TIME(2) | CCM_PLL5_TUN_INIT_FREQ(16));
diff --git a/arch/arm/mach-sunxi/usb_phy.c b/arch/arm/mach-sunxi/usb_phy.c
index 278587b..9bf0b56 100644
--- a/arch/arm/mach-sunxi/usb_phy.c
+++ b/arch/arm/mach-sunxi/usb_phy.c
@@ -146,10 +146,10 @@ __maybe_unused static void usb_phy_write(struct
sunxi_usb_phy *phy, int addr,
}
}
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
static void sunxi_usb_phy_config(struct sunxi_usb_phy *phy)
{
-#if defined CONFIG_MACH_SUN8I_H3
+#if defined CONFIG_MACH_SUNXI_H3_H5
if (phy->id == 0)
clrbits_le32(SUNXI_USBPHY_BASE + REG_PHY_UNK_H3, 0x01);
#endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 654ec73..b3af193 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -54,6 +54,11 @@ config SUNXI_GEN_SUN6I
watchdog, etc.
+config MACH_SUNXI_H3_H5
+ bool
+ select SUNXI_GEN_SUN6I
+ select SUPPORT_SPL
+
choice
prompt "Sunxi SoC Variant"
optional
@@ -124,8 +129,7 @@ config MACH_SUN8I_H3
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
- select SUNXI_GEN_SUN6I
- select SUPPORT_SPL
+ select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
config MACH_SUN9I
@@ -147,7 +151,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
- default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 ||
MACH_SUN8I_A83T
+ default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 ||
MACH_SUN8I_A83T
config RESERVE_ALLWINNER_BOOT0_HEADER
bool "reserve space for Allwinner boot0 header"
@@ -335,7 +339,7 @@ config OLD_SUNXI_KERNEL_COMPAT
config MMC0_CD_PIN
string "Card detect pin for mmc0"
- default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I
+ default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I
default ""
---help---
Set the card detect pin for mmc0, leave empty to not use cd. This
@@ -500,7 +504,7 @@ config AXP_GPIO
config VIDEO
bool "Enable graphical uboot console on HDMI, LCD or VGA"
- depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I &&
!MACH_SUN50I
+ depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I &&
!MACH_SUN50I
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 1f23c8e..5ca0a71 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -132,7 +132,7 @@ if SPL
config SPL_SPI_SUNXI
bool "Support for SPI Flash on Allwinner SoCs in SPL"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 ||
MACH_SUN50I
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5
|| MACH_SUN50I
---help---
Enable support for SPI Flash. This option allows SPL to read from
sunxi SPI Flash. It uses the same method as the boot ROM, so does
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index b87210b..abdfada 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -62,7 +62,7 @@
#define AHB_GATE_OFFSET_EPHY 0
-#if defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUNXI_H3_H5)
#define SUN8I_GPD8_GMAC 2
#else
#define SUN8I_GPD8_GMAC 4
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f2c5629..64e5bc2 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -12,7 +12,7 @@ choice
default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33
default AXP818_POWER if MACH_SUN8I_A83T
- default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I
+ default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I
config SUNXI_NO_PMIC
bool "board without a pmic"
@@ -60,7 +60,7 @@ config AXP818_POWER
config SY8106A_POWER
bool "SY8106A pmic support"
- depends on MACH_SUN8I_H3
+ depends on MACH_SUNXI_H3_H5
---help---
Select this to enable support for the SY8106A pmic found on some
H3 boards.
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 5bb97ff..068f24f 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -45,7 +45,7 @@ static int ehci_usb_probe(struct udevice *dev)
* clocks resp. phys.
*/
priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0;
-#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I)
+#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0;
#endif
priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST;
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
