Jürgen Schöw wrote:
> This seems to be similair to the Steppingstone bootloader from Samsung. This
> SPL is already in the eeprom of the system and will be (hopefully) integrated
> in the cpu rom mask for the next revision.
>
> If I see it correct, I have to define the whole parameterset for the
Hi,
thanks all for the comments. I will try to fix these.
On Sat, 1 Nov 2008 13:57:25 +0100, Jean-Christophe PLAGNIOL-VILLARD
<[EMAIL PROTECTED]> wrote:
> On 15:30 Fri 31 Oct , Juergen Schoew wrote:
> > Hi U-Boot mailling list,
> >
> > This patchset adds a new ARM board with the NXP PNX8181
Hi,
I'm impressed you have been very fast with the comments. I've seen the
comments from Peter Tyson and Jean-Christophe PLAGNIOL-VILLARD as well and it
seem I have a lot to change.
On Fri, 31 Oct 2008 12:09:55 -0500, Scott Wood <[EMAIL PROTECTED]>
wrote:
> On Fri, Oct 31, 2008 at 03:30:33PM +01
Hi Peter,
On Fri, 31 Oct 2008 13:55:53 -0500, Peter Tyser <[EMAIL PROTECTED]> wrote:
> Hi Jürgen,
>
> > If you have any comments please email to me.
>
> You should add an entry to the MAINTAINERS file for the Firetux.
OK, will be in the next cycle.
Regards
Jürgen Schöw
--
Dipl.-Ing. Jürgen
On 15:30 Fri 31 Oct , Juergen Schoew wrote:
> Hi U-Boot mailling list,
>
> This patchset adds a new ARM board with the NXP PNX8181 cpu to u-boot.
> The PNX8181 is an ARM926ej with an internal DSP and a baseband processor
> (used for DECT). The chip also features dual ethernet, digital to analo
Hi Jürgen,
> If you have any comments please email to me.
You should add an entry to the MAINTAINERS file for the Firetux.
Best,
Peter
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Fri, Oct 31, 2008 at 03:30:33PM +0100, Juergen Schoew wrote:
> +#ifdef CONFIG_CMD_NAND
> +void firetux_nandflash_init(void)
> +{
> + /* Hardware configuration */
> + /* setup GPIOB18 / FMP40 to GPIO input with internal pullup */
> + /* clear bits */
> + *(vu_long *)(PNX8181_SCON_
7 matches
Mail list logo
