Hi wolfgang,
In message aanlktikh5d7vcktg969=owfvqfas_ojoxtn_+dzsz...@mail.gmail.com
you wrote:
I have given boot delay 3 seconds but this delay is
for
autobooting , my problem is not able to see u-boot booting messages (
console messages) on Minicom or Kermit as soon
Hi Wolfgang,
I have given boot delay 3 seconds but this delay is for
autobooting , my problem is not able to see u-boot booting messages (
console messages) on Minicom or Kermit as soon as power is up. Its should
take less than 500ms to print console messages when u-boot
Dear Gurumurthy Gowdar,
In message aanlktikh5d7vcktg969=owfvqfas_ojoxtn_+dzsz...@mail.gmail.com you
wrote:
I have given boot delay 3 seconds but this delay is for
autobooting , my problem is not able to see u-boot booting messages (
console messages) on Minicom or Kermit
Hi,
I am using u-boot-2010.03 version, ported u-boot for MIPS32 AU13xx series.
U-boot is taking 5-7 seconds to boot after power up.
u-boot.bin is programmed in NOR Flash.
Is there any option to skip relocating to DDR2 (SDRAM) so that I want to check
booting u-boot from NOR Flash itself.
Dear =?iso-8859-1?Q?=A0Gurumurthy_G_M?=,
In message 5858de952c53a441bda3408a0524130104cce...@mkegmal01 you wrote:
I am using u-boot-2010.03 version, ported u-boot for MIPS32 AU13xx series.
U-boot is taking 5-7 seconds to boot after power up.
What is your bootdelay setting?
Is there any
5 matches
Mail list logo