[U-Boot] Help with u-boot

Hello Help make a u-bottles for sti7109 for mb442 motherboards and Linux to boot in 32bit mode. (now loaded in 29bit mode) Thanks in advance. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Help with u-boot and network on SDP4430 (Blaze) platform

Dear mdb 101, In message you wrote: > >I am having few issues that I am having with u-boot and linux kernel, and > I do not understand it. Did you try reding the documentation? >For example, > >If I use latest u-boot, compile it natively for sdp4430, it boots the > 26.6.38 kern

[U-Boot] Help with u-boot and network on SDP4430 (Blaze) platform

Hi, I am having few issues that I am having with u-boot and linux kernel, and I do not understand it. For example, If I use latest u-boot, compile it natively for sdp4430, it boots the 26.6.38 kernel, however network interface(eth0) is missing. Even if I modprobe KS8851 driver the i

Re: [U-Boot] Help with u-boot & linux on walnut based board.

Thanks Wolfgang, I looked at the code more carefully and found that I actually commented out a portion of the code that copies the emac address in linux. My initial port was using Linux 2.4.20 and the code was not there in that version. Since I'm now using 2.4.25 (ELDK 4.1 would not compile the

Re: [U-Boot] Help with u-boot & linux on walnut based board.

Dear "Brian S. Park", In message <[EMAIL PROTECTED]> you wrote: > > I'm having trouble witn my network interface under linux and need > some help from the experts here. > My board is based on IBM walnut (PPC405GPr) but uses a different phys > chip. It is using DP83848 instead of DP83843. The net

[U-Boot] Help with u-boot & linux on walnut based board.

Hi all, I'm having trouble witn my network interface under linux and need some help from the experts here. My board is based on IBM walnut (PPC405GPr) but uses a different phys chip. It is using DP83848 instead of DP83843. The network seems to work find in u-boot (both 1.3.1 and 1.3.4) but the l