Hi.
I tried to recompile my toolchain to a newer set, but so far no luck, no matter
what i try any of the newer U-Boot versions won't compile.
Regarding the old 1.1.3 version im using right now, when trying to get a dhcp
address, it keeps saying:
Warning: MAC addresses don't match:
HW
On Feb 6, 2011, at 11:25 PM, Wolfgang Denk wrote:
>
> You cannot change the tool chain (software, cheap or free, basicly
> zero ecological footprint), but you can change the hardware
> (expensive in many aspectes)? Weird...
The ADS hardware is very old, thats also why i prefer using the old u
Dear =?iso-8859-1?Q?Ronni_H=F8mpler?=,
In message <8f9c8a81-52b6-48f5-9f10-c3266b2b5...@edesigns.dk> you wrote:
>
> Updating my toolchain is not an option, and i know it did work with the
> old u-boot 1.1.3, but duo to bad timing the project was dropped for a
> few years.
...
> Im out of ideas, m
On Feb 6, 2011, at 10:47 PM, Wolfgang Denk wrote:
>
> No surprize that old tools won't work with current code.
>
> So this requires a two-step solution. In the first step, update your
> tool chain.
>
>
Hi.
Sorry about that.
Updating my toolchain is not an option, and i know it did work wit
Dear =?iso-8859-1?Q?Ronni_H=F8mpler?=,
In message you wrote:
>
> First off im sorry if this ends up the wrong place.
This is the perfectly right place...
...but U-Boot 1.1.3 is so old that you will not find many people here
that still remember.
I recommend to update and use somewhat current c
Hey.
First off im sorry if this ends up the wrong place.
I have been trying for the last 4 days to get u-boot to work on my old ADS
board, but without any luck. u-boot is flashed to the board, and does start up,
my env looks like this:
ADS GCPlus # printenv
bootdelay=3
baudrate=38400
autoload=
6 matches
Mail list logo