Re: [U-Boot] UEC phy not working on first try

2011-04-20 Thread DUNDA Matthias
I am using u-boot.2010.09 on a MPC8568-based board. When trying to boot over one of the UEC network interfaces, it is not working instantly. The cable is connected from the beginning, but I have to issue a manual 'boot' command, sometimes even multiple times before the link is correct.

Re: [U-Boot] UEC phy not working on first try

2011-04-20 Thread Detlev Zundel
Hi Matthias, I am using u-boot.2010.09 on a MPC8568-based board. When trying to boot over one of the UEC network interfaces, it is not working instantly. The cable is connected from the beginning, but I have to issue a manual 'boot' command, sometimes even multiple times before the

Re: [U-Boot] UEC phy not working on first try

2011-04-20 Thread DUNDA Matthias
Hi Detlef, I am using u-boot.2010.09 on a MPC8568-based board. Ah! I didn't realize that you are in the excellent position to have one good and one bad commit. Simply use git bisect to find the problematic commit and show that to us. so far I traced it down to the adjust_link call in

Re: [U-Boot] UEC phy not working on first try

2011-04-20 Thread Detlev Zundel
Hi Matthias, I am using u-boot.2010.09 on a MPC8568-based board. Ah! I didn't realize that you are in the excellent position to have one good and one bad commit. Simply use git bisect to find the problematic commit and show that to us. so far I traced it down to the adjust_link call

Re: [U-Boot] UEC phy not working on first try

2011-04-20 Thread Charles Krinke
Hmmm. I'm not seeing a delayed link behaviour at all and I am using the latest u-boot-2011.03 on an 8323ERDB which has two UEC's. On Apr 19, 2011 11:07 PM, DUNDA Matthias matthias.du...@thalesgroup.com wrote: I am using u-boot.2010.09 on a MPC8568-based board. When trying to boot over one of

[U-Boot] UEC phy not working on first try

2011-04-19 Thread DUNDA Matthias
Hi all- I am using u-boot.2010.09 on a MPC8568-based board. When trying to boot over one of the UEC network interfaces, it is not working instantly. The cable is connected from the beginning, but I have to issue a manual 'boot' command, sometimes even multiple times before the link is

Re: [U-Boot] UEC phy not working on first try

2011-04-19 Thread Detlev Zundel
Hi, Hi all- I am using u-boot.2010.09 on a MPC8568-based board. When trying to boot over one of the UEC network interfaces, it is not working instantly. The cable is connected from the beginning, but I have to issue a manual 'boot' command, sometimes even multiple times before the link is