Re: [U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

On Mon, 7 Dec 2015 22:38:53 +1100 "Brendan Simon (eTRIX)" wrote: ... > I finally tried mtd0 and found env vars :) > I updated /etc/fw_env.config to the following and now fw_printenv works > and no crc errors are reported. Yay :) > > /dev/mtd0 0xE 0x2

Re: [U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

Hi. see inline comments below ... On 7/12/2015 8:35 PM, Anatolij Gustschin wrote: > On Sun, 6 Dec 2015 12:01:08 +1100 > "Brendan Simon (eTRIX)" wrote: > >> Here is info from /proc/mtd and my /etc/fw_env.config. >> >> root@bjs:~# cat >> /proc/mtd

Re: [U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

Hi, On Sun, 6 Dec 2015 12:01:08 +1100 "Brendan Simon (eTRIX)" wrote: > Hi, > > I'm using a Digilent ZedBoard with a Xilinx Zynq 7020 SoC. The kernel > is from Analog Devices and is a fork of 4.0.0 (according to the Makefile). > > I am struggling to work out the fw_env.config file required to

[U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

Hi, I'm using a Digilent ZedBoard with a Xilinx Zynq 7020 SoC. The kernel is from Analog Devices and is a fork of 4.0.0 (according to the Makefile). I am struggling to work out the fw_env.config file required to use with fw_printenv/fw_saveenv. fw_printenv continually gives me CRC error and uses