Dear eric cariat,
First make sure the clock values are correct: Assuming the system is
running
at 400MHz, this would make sense if the MCI is clocked by system clock / 3.
Then the minimum clock would indeed be 260416.
Clock values are OK (running from 12 Mhz like the 9g45 eval kit), system
Hi Rheinard,
2010/12/5 Reinhard Meyer u-b...@emk-elektronik.de
Dear eric cariat,
I'm currently working on a custom board with an at91sam9g45 : I followed
the
instruction in README.atmel_mci. In U-boot, if I use the command mmcinfo,
the system hang. The uSD is working correctly with
Dear eric cariat,
I'm currently working on a custom board with an at91sam9g45 : I followed the
instruction in README.atmel_mci. In U-boot, if I use the command mmcinfo,
the system hang. The uSD is working correctly with at91bootstrap and linux.
In U-boot everything seems fine, the card
Hi,
I'm currently working on a custom board with an at91sam9g45 : I followed the
instruction in README.atmel_mci. In U-boot, if I use the command mmcinfo,
the system hang. The uSD is working correctly with at91bootstrap and linux.
In U-boot everything seems fine, the card exchange a few command
4 matches
Mail list logo
