Hi Feng,
We do not have two banks. Our design has only one Bank but two chips
in the single Bank. Any idea how to get this working in u-boot..
Thanks
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : ravi@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
CONFIDENTIALITY NOTE
I dont know how the hardware is tied down. But at it seems to be getting
bank 0 correctly.
However, you second bank base address should be bank0_base + size instead of
0.
You may have a hardware problem.
Feng Kan
On Thu, Jun 24, 2010 at 2:14 PM, wrote:
>
> Hi Feng,
> Below is the screen dum
Hi Feng,
Below is the screen dump after enabling Debug. ..
===
Booting RFL GARD 8000 Controller using u-boot based bootloader
===
U-Boot 1.3.0-rc4 (Jun 24 2010 - 16:47:32)
C
3 matches
Mail list logo