I am running U-Boot version U-Boot 1.3.1-rc1 on my board that has a
Broadcom network switch. My goal is to initialize this switch at the
bootloader level and be able to tftpboot a Linux kernel from one of
the ethernet ports of this switch.
As _I_ understand, there are two ways to initialize the
to look for
u-boot at this new address? Please let me know if it is documented
somewhere.
Thanks,
Jatin
2008/8/4 Scott Wood [EMAIL PROTECTED]:
On Fri, Aug 01, 2008 at 12:16:13PM -0500, Jatin Sharma wrote:
I have to increase u-boot's partition size on my board to make room
for an application
I have Freescale MPC8347. Can you confirm that I have to have U-Boot
start at 0xFFF0?
Thanks,
Jatin
2008/8/4 Scott Wood [EMAIL PROTECTED]:
Jatin Sharma wrote:
After I posted this message, I learned the reset vector for the PPC
architecture lies at 0xFFF00100.
Well, it depends on what
I have to increase u-boot's partition size on my board to make room
for an application to be compiled as part of u-boot binary. I am
currently running u-boot version 1.3.1-rc1 and my current NOR
partition is as follows:
Partition Address