Re: [U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12

> that's why you use opb_emac driver for ll_temac. That's all. Different driver > and different ip_core. I see. I erroneously understood that this driver supports every (t)emac flavours. Thanks for your help, llandre DAVE Electronics System House - R&D Department web: http

Re: [U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12

just started looking at a u-boot port but have been working lots > with the 2.6 kernel (using the ACE support). We did the same. First we worked on the ML403, then we ported our project to MiniModule that will be the base for the final application. -- llandre DAVE Electronics System Hou

[U-Boot-Users] LL_TEMAC on Avnet MiniModule-FX12

mething is wrong in my U-Boot port. Anybody experienced similar problems? TIA, llandre DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&[EMAIL PROTECTED] - Check out the new SourceFo

Re: [U-Boot-Users] [RFC] Host tool to perform semiautomatic updates

and see the result. >> > > I forgot to say there is a Python expect implementation called pyexpect as > well. Thank you all for the precious advices. I think I'll propose a python-based solution to my team. Cheers, llandre DAVE Electronics System House - R&D Departme

Re: [U-Boot-Users] [RFC] Host tool to perform semiautomatic updates

possible to group all of them in one single .zip file? 2) What about serial ports support? Is this really platform independent? 3) What about graphical interface? Is it possible to use the same library (and consequently have similar look&feel) on Windows and Linux? Cheers, llandre DA

[U-Boot-Users] [RFC] Host tool to perform semiautomatic updates

ll have just to wait for notification. Anybody knows is there is something like this available? If not, any suggestions about how to implement it? Thanks in advance, llandre DAVE Electronics System House - R&D Department web: http://www.dave.eu email:

[U-Boot-Users] Programming Lattice XP2 FPGA

Hi, in 2006 you released a patch to support Lattice ECP FPGA programming via JTAG interface in U-Boot. I'm wondering if this patch supports new XP2 (flash-based) family too. If not, can you address me about how to change the sources in order to add xp2 support? Thanks in advance, ll

Re: [U-Boot-Users] Support for SRAM in u-boot

to your platform. In platform-specific initialization code (typically located in board//.c) you can add this stuff. Regards, llandre DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&[EMAIL PROTECTED] --

Re: [U-Boot-Users] Support for SRAM in u-boot

Marco, U-Boot provides generic commands to read/write memory locations (md/mw respectively) no matter where they physically are. Once your memory controller is set up properly (chip select timing etc.) you can easily access the SRAM from U-Boot shell. HTH, llandre DAVE Electronics System