On Thu, Aug 7, 2008 at 2:18 PM, Wolfgang Denk <[EMAIL PROTECTED]> wrote:
> In message <[EMAIL PROTECTED]> you wrote:
>> >> +#undef CONFIG_CMD_IMLS
>> >
>> > Why do you want to disable the "imls" command?
>>
>> Because I get compilation errors from cmd_bootm.c if it's enabled. I
>> haven't checked t
In message <[EMAIL PROTECTED]> you wrote:
>
> >> +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in
> >> Hz */
> >
> > Please remove that line. Makes no sense to undef what doesn't exist.
>
> Ok (quite a number of board configs have this #undef and some have a
> #define CFG
Hi
On Thu, Aug 7, 2008 at 12:05 AM, Wolfgang Denk <[EMAIL PROTECTED]> wrote:
> In message <[EMAIL PROTECTED]> you wrote:
>> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
>> 3DS) board.
>>
>> Booting from NAND is not supported yet so U-boot relies on some other
>> initial bo
Hi,
On Wed, Aug 6, 2008 at 11:49 PM, Jean-Christophe PLAGNIOL-VILLARD
<[EMAIL PROTECTED]> wrote:
> On 14:19 Wed 06 Aug , Magnus Lilja wrote:
>> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
>> 3DS) board.
>>
>> Booting from NAND is not supported yet so U-boot relies on
In message <[EMAIL PROTECTED]> you wrote:
> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
> 3DS) board.
>
> Booting from NAND is not supported yet so U-boot relies on some other
> initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM.
>
> Signed-off-by
On 14:19 Wed 06 Aug , Magnus Lilja wrote:
> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
> 3DS) board.
>
> Booting from NAND is not supported yet so U-boot relies on some other
> initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM.
>
> Signed-of
Hi Ben,
On Wed, Aug 6, 2008 at 3:22 PM, Ben Warren <[EMAIL PROTECTED]> wrote:
> Hi Magnus,
>
> On Wed, Aug 6, 2008 at 5:19 AM, Magnus Lilja <[EMAIL PROTECTED]> wrote:
>> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
>> 3DS) board.
>>
>> Booting from NAND is not supported ye
Hi Magnus,
On Wed, Aug 6, 2008 at 5:19 AM, Magnus Lilja <[EMAIL PROTECTED]> wrote:
> Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
> 3DS) board.
>
> Booting from NAND is not supported yet so U-boot relies on some other
> initial boot loader to set up SDRAM and clocks and co
Add support for NAND and ethernet on the Freescale i.MX31 PDK (a.k.a.
3DS) board.
Booting from NAND is not supported yet so U-boot relies on some other
initial boot loader to set up SDRAM and clocks and copying U-boot to SDRAM.
Signed-off-by: Magnus Lilja <[EMAIL PROTECTED]>
---
MAKEALL
