On Fri, Jun 27, 2008 at 4:37 AM, Frank Prepelica
<[EMAIL PROTECTED]> wrote:
> Hi Ben,
>
> The ethernet adapter (PCMCIA ethernet card) which is directly connect to the
> board can be forced in windows to use 100Mbit full duplex, but u-boot still
> use 1Gbit. It's a Marvell phy, the exact phy descr
On Fri, Jun 27, 2008 at 2:37 AM, Frank Prepelica
<[EMAIL PROTECTED]> wrote:
> Hi Ben,
>
> The ethernet adapter (PCMCIA ethernet card) which is directly connect to the
> board can be forced in windows to use 100Mbit full duplex, but u-boot still
> use 1Gbit. It's a Marvell phy, the exact phy descr
On Fri, Jun 27, 2008 at 2:37 AM, Frank Prepelica
<[EMAIL PROTECTED]> wrote:
> Hi Ben,
>
> The ethernet adapter (PCMCIA ethernet card) which is directly connect to the
> board can be forced in windows to use 100Mbit full duplex, but u-boot still
> use 1Gbit. It's a Marvell phy, the exact phy descr
rds,
Frank
-Ursprüngliche Nachricht-
Von: Ben Warren [mailto:[EMAIL PROTECTED]
Gesendet: Mittwoch, 25. Juni 2008 18:34
An: Frank Prepelica
Cc: u-boot-users@lists.sourceforge.net
Betreff: Re: [U-Boot-Users] Set manually tsec speed in u-boot 1.2.0
Hi Frank,
Frank Prepelica wrote:
Hi Frank,
Frank Prepelica wrote:
>
> Hi all,
>
>
>
> is there a way to set the tsec speed in u-boot (v1.2.0) manually to
> 100Mbit? Because u-boot always uses 1Gbit although the
>
> link speed is fixed set(in windows) to 100Mbit.
>
>
>
How does Windows fit into this? Are you booting Windows
Hi all,
is there a way to set the tsec speed in u-boot (v1.2.0) manually to
100Mbit? Because u-boot always uses 1Gbit although the
link speed is fixed set(in windows) to 100Mbit.
Thanks
Best regards
Frank
