On Sat, Feb 02, 2008 at 11:16:52PM -0800, tanwani ronak wrote:
> I am working on BSP development for S3C2443. I need to
> boot system with NOR spansion (S29JL064. please help
> me how should i deal this.
There is no S3C2443 support in mainline u-boot at this point.
I once started working on it,
On Sun, Feb 03, 2008 at 04:52:00PM +0800, tangwei wrote:
> by the way can you give me the gta02v2's schematic,thanks
I am afraid this is not possible, since the product is not yet in the
market. As far as I know, the schematics might be available under a
permissive NDA (and NDA that allows you t
On Sun, Feb 03, 2008 at 10:30:52AM +0800, tangwei wrote:
>
> thanks,
>
> i have note this,but i think the project they created is in a mess,
> inorder to use it:
> first, you must have to spend much time to figure out the patch's
> order; second, i consider some of their patchs are not placed
>
#x27;s directory;the SC32442B43 is a complete minimal system for
u-boot and linux,i just want to build a minimal system.> Date: Sat, 2 Feb 2008
22:20:46 +0100> From: [EMAIL PROTECTED]> To: [EMAIL PROTECTED]> CC:
u-boot-users@lists.sourceforge.net> Subject: Re: [U-Boot-Users] u-boot for
SC3
complete minimal system for
> u-boot and linux,i just want to build a minimal
> system.
> > Date: Sat, 2 Feb 2008 22:20:46 +0100> From:
> [EMAIL PROTECTED]> To: [EMAIL PROTECTED]> CC:
> u-boot-users@lists.sourceforge.net> Subject: Re:
> [U-Boot-Users] u-boot for SC
te minimal system for u-boot and linux,i just want to
build a minimal system.
> Date: Sat, 2 Feb 2008 22:20:46 +0100> From: [EMAIL PROTECTED]> To: [EMAIL
> PROTECTED]> CC: u-boot-users@lists.sourceforge.net> Subject: Re:
> [U-Boot-Users] u-boot for SC32442B> > On Wed
On Wed, Jan 23, 2008 at 09:02:06AM +0800, tangwei wrote:
>
> dear ,all
>
> I have a board use S3C2442B43 (400MHz, 64MB mSDRAM, 128MB Nand),and
> there is no flash or other memory,so have to use the nand boot,is
> there someone have done something for this ,please give me some
> advices,thanks.
tangwei hotmail.com> writes:
> dear ,all
Hi Tangwei
> I have a board use S3C2442B43 (400MHz, 64MB mSDRAM, 128MB Nand), and there is
> no flash or other memory,so have to use the nand boot, is there someone have
> done something for this, please give me some advices, thanks.
Booting from NAND fl
dear ,all
I have a board use S3C2442B43 (400MHz, 64MB mSDRAM, 128MB Nand),and there is no
flash or other memory,so have to use the nand boot,is there someone have done
something for this ,please give me some advices,thanks.
_
天凉了，
