We got ours to work just fine.
NB!! Remember to save after every "Step you do*. I will mark with -->
I don't know why, but if we dont do this, it does not seem to work
properly.
To Save:
File>Save
Set up using the wizard as normal
For Copy & Paste choose: Use C and V
For Back Page Navigatio
I have a fair amount of files that are currently dynamic files which I would
like to change back to hashed files. The reason being is to see if it would
impact positively on the performance of my machine.
If I take the file below as an example, what would be the best way to
determine 'a close as
I really appreciate all the responses; I was asking for a colleague who
didn't make the switch when the mailing list moved, and y'all certainly
kept me busy forwarding mail yesterday!
When I last touched base with him, he was working with the information
Susan provided below (which is why I'm r
unfortunately it is the patch that asks you to hit enter - I've gone
back to IBM on this (and log a new call for this different issue)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Andrew Gissing
Sent: 04 June 2004 01:06
To: [EMAIL PROTECTED]
Subject: R
If required, create a copy of vt100.wit file for backup purposes and
customize vt100 emulation characteristics to match that of UV/Term or the
Wizard configurations.
Regards, Ian Renfrew
- Original Message -
From: "Joe Walter" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Thursday,
DISCLAIMER:
This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error, please delete it and notify
the sender immediately. Please note that there is no guarantee tha
Andre,
Here's how I'd go about it:
Modulo - The existing modulo (2644 in your example) is probably too small.
You want to make sure you use a prime number. I'd plan on going a little
large and then doing more analysis and another resize after converting. So
I'd use the physical size divided by
Andre,
Be careful when looking at ANALYZE.FILE for dynamic files.
The load & modulo don't translate well for static files because of
"large records".
The "DUM" example below is a dynamic file with 7 "large records" in it.
The 7 ids & pointers to the corresponding data's residence in OVER.30
ea
I know there must be a way to do this. I thought Id ask so it would save a
lot of aggravation. We have a bunch of dumb terminals (vt100 emulation)
with printers attached to the printer port. Currently, we have Epson
printers attached and are printing ascii text to a pre-printed form. I
would li
I've got a customer that is having some problems debugging his Basic
code. He started using the #INCLUDE statement to include code from
other files. He's running the code with the TRAP option so that he gets
dropped to the debugger on non-fatal errors. When the program
encounters an error that c
> records" in it. The 7 ids & pointers to the corresponding
> data's residence in OVER.30 easily fit in 1 group, but if you
> made the file static, you'd better make it at least mod 5,
5? The counting of the mod shall be 7. Neither shalt thou count to 5
unless thou proceedest to 7. 6 is rig
There are some limitations as to what you can feed through a term
emulator (for overlays, we can not
send most graphic logos, but those work fine for directly sending to a
network printer.)
Drew
Anthony Dzikiewicz wrote:
I know there must be a way to do this. I thought Id ask so it would save a
This usually occurs when the printer is either not Postscript capable or has PCL mode
turned on. If this is an HP type printer with the postscript card, make sure your
first set of commands actually sent to the printer switch it over to postscript mode
(which is nothing more than an ascii data
I don't have any specific knowledge of Epson printers
but on HP you can cause the printer to shift to postscript
personality by sending then following:
PRINT CHAR(27):'%-12345X':
PRINT '@PJL ENTER LANGUAGE = PostScript'
This turns off the default PCL processing and enables
postscript.
Ron White
I think you're right. I assumed that this is postscript printer. We have
always used this with windows and could print postscript, but it is being
converted. I guess I should start over with a real postscript printer and
take it from there.
Sorry for the trouble
Anthony
-Original Message--
Nice information, but, how would one switch back to PCL? For that
matter, where did you get that information and is it on the internet
somwhere?
TIA,
Karl
On Fri, 2004-06-04 at 14:21, Ron White wrote:
> I don't have any specific knowledge of Epson printers
> but on HP you can cause the printer t
Use ANALYZE.FILE filename STATS to get the record (and group) sizes, and do the
arithmetic on these.
---
u2-users mailing list
[EMAIL PROTECTED]
To unsubscribe please visit http://listserver.u2ug.org/
Try Googling for them. Here is a start:-
http://www.laserjet.co.uk/manuals.htm
Louis
- Original Message -
From: "Karl L Pearson" <[EMAIL PROTECTED]>
To: "u2-users" <[EMAIL PROTECTED]>
Sent: Saturday, June 05, 2004 5:25 AM
Subject: Re: [U2] [OT]Postscript to a Laser on Dumb Term Aux Por
Dear U2 Gurus,
I am starting to think about improving the security of our
Windows-hosted,
UV-based systems against internal snooping or attack.
External influences
are less of an issue, we can always encrypt any traffic
either via a VPN
tunnel (for the Internet) or by installation of encryption
h
19 matches
Mail list logo
