7.73 miles with what 23 or 25dbi dishes? Sure you're aligned right and not
on a side lobe?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Oct 21, 2014 at 4:25 PM, Stephen Parac
wrote:
> I'm having some issues with my first AirFiber5 lin
FYI two Beam5 are at -64 @ 11.6 miles for me. They are certified for 25dbi.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Oct 21, 2014 at 4:35 PM, Josh Luthman
wrote:
> 7.73 miles with what 23 or 25dbi dishes? Sure you're aligned right
On Mon, Oct 13, 2014 at 11:22:14PM -0500, Scott Lambert wrote:
> On Mon, Oct 13, 2014 at 06:44:34PM -0700, Ben Moore wrote:
> > Hi Scott -
> >
> > Sriram and Salvador should have reached now.
> >
>
> Yes they took a look. I don't think it mis-behaved for them...
Sriram and Salvador have been
Stephen,
When you used the UB Link Calc you told it your TDD Freq was 5800 which is 47db
EIRP. From the screen shots you are really using DFS freqs which are limited
to 30db EIRP. In my opinion a 7.7 mile shot with an Airfiber 5 will give you
the performance that you are seeing because you do
Good catch. The 30db tx power is probably EIRP, not tx power (weird label
IMO).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, Oct 21, 2014 at 4:56 PM, G. Nicholas wrote:
> Stephen,
>
> When you used the UB Link Calc you told it your TDD
It is EIRP. and the drop in throughput is interference.
- Original Message -
From: Josh Luthman
To: Ubiquiti Users Group
Sent: Tuesday, October 21, 2014 2:03 PM
Subject: Re: [Ubnt_users] AirFiber5 Issues
Good catch. The 30db tx power is probably EIRP, not tx power (weird
I agree about the interference. I found the spectrum had to be clean or
even at less than 3 miles we had a hard time getting much throughput.
Casey at AirLink has a 15mile link doing 250Mb one way.
On Tue, Oct 21, 2014 at 4:20 PM, Kees H wrote:
> It is EIRP. and the drop in throughput is inter
Look at your link calc. Calculated output EIRP was at 41. I ran a 7.7
mile link calc in one of our AF5's with the max output power set to
30dBm, and it says a 40MHz channel @ 30dBm will get around 4x
modulation, 16QAM, 204Mbps with a -77. That's probably a bit optimistic,
but it also looks like
Great! Keep us posted.
Thanks,
Ben
On Tue, Oct 21, 2014 at 2:40 PM, Scott Lambert
wrote:
> On Mon, Oct 13, 2014 at 11:22:14PM -0500, Scott Lambert wrote:
> > On Mon, Oct 13, 2014 at 06:44:34PM -0700, Ben Moore wrote:
> > > Hi Scott -
> > >
> > > Sriram and Salvador should have reached now.
> >
I just upgraded a XM TI to 5.5.10. I’ll let you know if I have any issues
with it.
*From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On
Behalf Of *Rory Conaway
*Sent:* Monday, October 20, 2014 1:19 PM
*To:* Ubiquiti Users Group
*Subject:* Re: [Ubnt_users] Running into p
BINGO! Been there, done that! Good call :)
On Tue, Oct 21, 2014 at 4:56 PM, G. Nicholas wrote:
> Stephen,
>
> When you used the UB Link Calc you told it your TDD Freq was 5800 which is
> 47db EIRP. From the screen shots you are really using DFS freqs which are
> limited to 30db EIRP. In my opi
After setting both APs back to 5.5.8 and getting everyone on, I haven’t seen
the problem since. One of the APs is now at 20MHz with a different SSID. I’m
still converting the other one over but I will have it done tonight but it
seems the problem went away.
Rory
From: ubnt_users-boun..
12 matches
Mail list logo
