Yea, if that is if you use the 5GHz only for backhaul and it can maintain
maximum modulation. In the real world, if any user connects to those APs on
5GHz, especially with weak signals, then the bandwidth speeds will drop fast.
I was wondering how the mesh works on best path analysis and
MT with MAC Auth and a script?
--
On 11/16/2016 3:44 PM, Jan-OOLLC wrote:
> Is there a firmware version that could provide homes with a means of
> keeping the teenagers offline at night? The powercord is not a good
> solution. I need something with multiple passwords or users and times
> when
Yes, each hop halves the throughput:
Here's an example:
-
20MHz channels
-
Android(Nexus 6P) connected on 5GHz
-
UAP-AC-M
Hardwired:
[ 5] 0.00-20.05 sec 272 MBytes 114 Mbits/sec sender
[ 5] 0.00-20.05 sec 271 MBytes 113 Mbits/sec
Correct. Can plug and play as you desire. Can do all UAP-AC-M, or all
UAP-AC-M-PRO, or mix/match.
Can do single-hop uplink off of existing Gen2 devices (AC-LITE, AC-LR,
AC-PRO, AC-EDU, AC-IW) to AC-M and AC-M-PRO.
AC-M and AC-M-PRO are only ones that support multi-hop.
On Wed, Nov 16, 2016 at
Yes, we had that issue when we were using a POE inserter that was less than
1.25 amp. Make sure you use the POE that comes with the EdgePoint, it is
rated higher than the POE that comes with the RM5s
If you are using a 24v setup, we started using the Mean Well RSD-100B-24 as
a DC-DC converter
Is there a way to see the supply voltage on a Edgepoint 6.I have 2 Rockets
connected to one that keeps rebooting. No errors and no log. Only radios
rebooting. I think I need more UMPH up the tower. But I am not able to see
what power is getting there.
Steve Barnes
Wireless Operations
Hello,
I realize that this is a long shot.
I am looking for one pair of AF-11x (low band) radios.
Anyone with any leads, would be greatly appreciated.
Thanks
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2
Can you clarify the difference between the M and the M-PRO as far as
mesh goes? Do either of them mesh to either unit?
Say I wanted to install 4 APs in a park, do I need 1 M-PRO and 3 M?
Or could I simply install 4 M units, uplink to one of them and mesh the
other 3?
On 11/15/2016 11:40
