Ubuntu 7.10 is still affected by libadns unable to read a nameserver
with a compressed IPv6 address.
** Also affects: wireshark
Importance: Undecided
Status: New
--
Complains about IPv6 entries in resolv.conf
https://bugs.launchpad.net/bugs/75618
You received this bug notification bec
I try to use sync before restarting but always I got the same errors
with less transactions, even logging out from kde was not helping.
--
ubuntu 7.10 64bit: mount / is busy after last 11 security update: disk
corruptions
https://bugs.launchpad.net/bugs/161862
You received this bug notification
Public bug reported:
Ubuntu 7.10 64bit version on Asus striker extreme, nvidia 100.14.19 video
driver, 4Gb ram, 2 sata 500 Gb drive all on reiserfs 3.6, 1 sata dvd burner, 1
ide cd burner, 1 ide dvd burner.
I'm using the stock kernel no recompilation, no external modules except nvidia
only ubun
** Bug watch added: GNOME Bug Tracker #495641
http://bugzilla.gnome.org/show_bug.cgi?id=495641
** Also affects: evince via
http://bugzilla.gnome.org/show_bug.cgi?id=495641
Importance: Unknown
Status: Unknown
--
evince cannot open files when embedded with mozplugger in Gutsy
https
I would like to add I have an ATI Radeon IGP 345M, and I have been
undergoing this problem since I installed Ubuntu Gutsy.
--
blender crashes everytime i open it
https://bugs.launchpad.net/bugs/123437
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug con
It's a xorg bug. I post the solution here:
http://ubuntuforums.org/showthread.php?t=587668
--
Ubuntu freezing with toshiba laptop
https://bugs.launchpad.net/bugs/154069
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bu
You are right, sorry.
I thought your mpirun does not work, so I just tried if does. strace
shows me the same prefix error, but mpirun works fine, though.
--
mpicc (openmpi) broken in Ubuntu 7.10 RC
https://bugs.launchpad.net/bugs/152273
You received this bug notification because you are a member
Public bug reported:
First, I didn't know which package is the real responsible for this
error so I hope somebody is good enough to throw this in the right
basket.
I've seen this on multiple occasions, but I can clearly remember this as
well with my Edgy installation but since I still saw it with
I don't think is a 3D cube plugin's fault for these reasons:
1. In a fresh installation (start from zero: all disk formatted) of 7.10
(Gusty) the 3D cube isn't enabled by default. I had freezes with just
finished installation on three different pcs: 2 desktops with ATI Radeon
X300 and 1 laptop wit
Hello,
when I start gnome-sound-properties and test sound recording it always throws
"Failed to construct test pipeline for 'gconfaudiosrc ! audioconvert !
audioresample ! gconfaudiosink profile=chat'"
even though I can hear the recorded sound...
By the way, by default I couldn't hear anything w
Public bug reported:
Binary package hint: authbind
Dear Colleagues,
please sync:
source: authbind
version: 1.2.0
from: debian unstable
Ubuntu changes can be dropped, everything is fixed upstream.
Regards,
\sh
** Affects: authbind (Ubuntu)
Importance: Undecided
Status: New
--
Public bug reported:
Lack of the ide-cs driver means that the built-in compact flash reader
on many laptops will not work. Is there any reason this driver is
omitted? Very frustrating.
** Affects: linux-meta (Ubuntu)
Importance: Undecided
Status: New
--
# CONFIG_BLK_DEV_IDECS is n
Thanks for your comment, Andras. I already realized this was related to
dietlibc instead and I filed a new spec about it:
https://blueprints.launchpad.net/ubuntu/+spec/better-dietlibc. I will
investigate a bit about this and report my tests there.
In the meantime, my debdiff solves this problem un
I also installed WINE. It could have been WINE.
--
Windows NT Tri Boot Install Corruped after Kubuntu 6.06 Install
https://bugs.launchpad.net/bugs/161860
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
When I Installed Kubuntu 6.06 on a Dual boot system with Windows 98 and
Windows 2000, the installer set it up like this: GRUB boots linux or
Windows 2000, Windows 2000 boots Windows 2000 or Windows 98. The WIN98
and WIN2000 partitions are FAT32 and the Kubuntu partition is a E
** Changed in: ubuntu
Assignee: (unassigned) => Harald Sitter (apachelogger)
Status: Confirmed => In Progress
--
[needs-packaging] KScannerButtons
https://bugs.launchpad.net/bugs/112039
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contac
further to the //Option "DynamicTwinView" "False"// recommendation above, would
someone please give more detailed info on exactly where in the xorg.conf file
this should go?
thank you
--
[nvidia-glx] unable to "set" proper screen refresh rate due to DynamicTwinView
https://bugs.launchpad.net/bu
Public bug reported:
/system/storage/default_options/vfat/mount_options on a clean install of
gutsy/feisty has umask=0077, which makes all files +x. This means that
files copied from a usb fat drive to the local drive will have the +x
bit set, so Nautilus will always prompt for Run/Open.
Instead
** Also affects: baltix
Importance: Undecided
Status: New
--
[gutsy] no sound: Failed to construct test pipeline in sound recording
https://bugs.launchpad.net/bugs/131711
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
the CD auto ejects once it has shut down ejecting the CD before the
system has shut down should not work as it should be Locked (is locked)
as ubuntu Live CD is still useing it
the msg is an little miss leading still tho
--
should tell that CD will be ejected automatically
https://bugs.launchpad
I will test this on Monday when I get to my work computer. However I don't
think the bug report is "Invalid" since the mail selected is an unreasonable
default choice. I'll agree to almost any other mail in the mailbox (or none)
but to go to "the first mail ever received" after deleting the last
Public bug reported:
There's a small typo in the about-edubuntu document of Edubuntu's
documentation. The string #48 says:
"[...] Our first release (Breezt Badger) was in October 2005".
Breezt Badger -> Breezy Badger
https://translations.launchpad.net/ubuntu/gutsy/+source/edubuntu-
docs/+pots/a
Run the command
gnomebaker --version
please.
--
erasing a CD-RW says 'one minute remaining' for about 20 minutes
https://bugs.launchpad.net/bugs/161817
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ub
** Attachment added: "fixed debdiff from latest debian version to new ubuntu
version"
http://launchpadlibrarian.net/10327763/ldtp_0.9.2-2ubuntu1.debdiff
--
[MoM Merge] ldtp 0.9.2-2ubuntu1
https://bugs.launchpad.net/bugs/161201
You received this bug notification because you are a member of Ub
I also have this problem.
You could use xtightvnc instead. This one works.
Open a terminal and type: xtightvnc -listen
--
vncviewer -listen allows connections from UltraVNC SC clients, but doesn't
display the window
https://bugs.launchpad.net/bugs/123631
You received this bug notification becaus
** Attachment removed: "debdiff againsts last debian version to new
ubuntu version"
http://launchpadlibrarian.net/10327560/ipe_6.0pre28-4ubuntu1.debdiff
** Attachment added: "fixed debdiff from latest debian version to new ubuntu
version"
http://launchpadlibrarian.net/10327709/ipe_6.0pre2
** Attachment removed: "debdiff from ldtp 0.8.0-3ubuntu1 to
0.9.2-2ubuntu1"
http://launchpadlibrarian.net/10319250/ldtp_0.9.2-2ubuntu1.debdiff
--
[MoM Merge] ldtp 0.9.2-2ubuntu1
https://bugs.launchpad.net/bugs/161201
You received this bug notification because you are a member of Ubuntu
Bugs,
No, I'm still on Ubuntu 7.04.
--
erasing a CD-RW says 'one minute remaining' for about 20 minutes
https://bugs.launchpad.net/bugs/161817
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
Public bug reported:
Please add the following lines to /etc/udev/rules.d/45-libsane.rules
# Brother DCP 7025
SYSFS{idVendor}=="04f9", SYSFS{idProduct}=="0184", MODE="666", GROUP="scanner"
This will make the installation of the Brother driver much easier on Ubuntu.
I managed to get the scanner
** Attachment removed: "fixed debdiff from latest debian version to new
ubuntu version"
http://launchpadlibrarian.net/10327604/mindi_2.24-2ubuntu1.debdiff
** Attachment added: "fixed debdiff from latest debian version to new ubuntu
version"
http://launchpadlibrarian.net/10327674/mindi_2.2
** Attachment removed: "debdiff from xclass 0.9.2-2ubuntu1 to
0.9.2-3ubuntu1"
http://launchpadlibrarian.net/10319086/xclass_0.9.2-3ubuntu1.debdiff
** Attachment added: "fixed debdiff against last debian version"
http://launchpadlibrarian.net/10327643/xclass_0.9.2-3ubuntu1.debdiff
--
[MoM
No, it's completely unrelated; logd and bootlogd are completely
different programs with a completely different implementation.
--
logd not running
https://bugs.launchpad.net/bugs/98955
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
** Attachment added: "fixed debdiff from latest debian version to new ubuntu
version"
http://launchpadlibrarian.net/10327604/mindi_2.24-2ubuntu1.debdiff
--
[MoM Merge] mindi 2.24-2ubuntu1
https://bugs.launchpad.net/bugs/161194
You received this bug notification because you are a member of Ub
** Attachment removed: "debdiff from ipe 6.0pre28-3ubuntu1 to
6.0pre28-4ubuntu1"
http://launchpadlibrarian.net/10318891/ipe_6.0pre28-4ubuntu1.debdiff
** Attachment added: "debdiff againsts last debian version to new ubuntu
version"
http://launchpadlibrarian.net/10327560/ipe_6.0pre28-4ubun
Public bug reported:
Binary package hint: gnome-schedule
Gnome-schedule 1.2.0 has been released: http://gaute.vetsj.com/log/?p=35
- gaute
** Affects: gnome-schedule (Ubuntu)
Importance: Undecided
Status: New
--
Gnome-schedule 1.2.0 released
https://bugs.launchpad.net/bugs/161854
** Attachment removed: "debdiff from mindi 2.22-1ubuntu1 to
2.24-2ubuntu1"
http://launchpadlibrarian.net/10319089/mindi_2.24-2ubuntu1.debdiff
--
[MoM Merge] mindi 2.24-2ubuntu1
https://bugs.launchpad.net/bugs/161194
You received this bug notification because you are a member of Ubuntu
Bugs, w
I can confirm this bug in gutsy. Having set
Option "XAxisMapping" "6 7"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
in xorg.conf, horizontal scrolling works fine in all other applications using
my touchpad/trackpoint. The problem is only in
I can confirm this bug in gutsy. Having set
Option "XAxisMapping" "6 7"
Option "EmulateWheel" "true"
Option "EmulateWheelButton" "2"
in xorg.conf, horizontal scrolling works fine in all other applications using
my touchpad/trackpoint. The problem is only in
The workaround is working - I, too use compiz
--
[gutsy] Fullscreen does not work
https://bugs.launchpad.net/bugs/159631
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
http
Confirmed, gutsy amd64 user with compiz.
If I right-click on the "fullscreen" task and choose maximize, then I
almost get full-screen (the gnome panels are on-top).
** Changed in: f-spot (Ubuntu)
Status: New => Confirmed
--
[gutsy] Fullscreen does not work
https://bugs.launchpad.net/bugs
This bug is linked to http://bugzilla.gnome.org/show_bug.cgi?id=459014
--
Gutsy : impossible to add Salut account
https://bugs.launchpad.net/bugs/156444
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
u
** Bug watch added: Debian Bug tracker #450785
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=450785
** Also affects: guarddog (Debian) via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=450785
Importance: Unknown
Status: Unknown
--
Please merge guarddog 2.6.0-1 from Debian u
I confirm. I have a Presario 2500 (2531EA) with kubuntu gutsy installed
--
irda-utils causes system unbootable!
https://bugs.launchpad.net/bugs/150635
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubu
I confirm. I have a Presario 2500 (2531EA) with kubuntu gutsy installed
--
irda-utils causes system unbootable!
https://bugs.launchpad.net/bugs/150635
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubu
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/10327532/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/10327533/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/10327534/ProcStatus.txt
--
Deskto
Public bug reported:
Binary package hint: gnome-panel
Ha ocurrido un error mientras cargaba o guardaba la información de la
configuración para gnome-panel. Puede que algunas de las opciones de
configuración no funcionen.
Falló: Falló: Esquema
«/schemas/apps/workspace_switcher_applet/prefs/displ
Also, why were earlier bugs made a duplicate of this one? It's supposed
to be the other way round.
--
vlc in full screen
https://bugs.launchpad.net/bugs/81378
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
The upstream bug linked to this bug isn't this bug at all. Anyway, it's
now no longer an issue.
** Changed in: vlc (Ubuntu)
Status: In Progress => Fix Released
--
vlc in full screen
https://bugs.launchpad.net/bugs/81378
You received this bug notification because you are a member of Ubuntu
In fact this happen because I didn't fill all field when I created the
account.
To fix this :
$ rm -rf ~/.gconf/apps/telepathy/mc/accounts/salut*
$ killall gconfd-2
Create an account without any empty field. Close the account manager
window. Then this account will still be displayed when reopen t
Public bug reported:
Binary package hint: gnome-power-manager
I assigned the "When the suspend button is pressed" action to "Do
nothing", but when I press the suspend button the system tries to
suspend; since this part of acpi is broken, the result is a system not
being able to boot anymore (at l
a guy from #qemu on irc.freenode says that it's a bug from libata that
is fixed in earlier cvs.
I am starting to question the efficiency of Ubuntu releases.
This mean the maintainer of the package didn't even ran Qemu at all, because
nothing works if uses ide, so well nothing at all in fact ...
** Changed in: update-manager (Ubuntu)
Sourcepackagename: None => update-manager
--
upgrade distro 7.04 to 7.10
https://bugs.launchpad.net/bugs/161840
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubu
Public bug reported:
Binary package hint: totem-gstreamer
$ totem mms://tv.gldn.net/A1
JACK tmpdir identified as [/dev/shm]
"Видеопроигрыватель Totem" is too long to be used as a JACK client name.
Please use 33 characters or less.
JACK tmpdir identified as [/dev/shm]
"Видеопроигрыватель Totem" is
** Attachment added: "guarddog_2.6.0-1ubuntu1.debdiff"
http://launchpadlibrarian.net/10327352/guarddog_2.6.0-1ubuntu1.debdiff
--
Please merge guarddog 2.6.0-1 from Debian unstable
https://bugs.launchpad.net/bugs/160613
You received this bug notification because you are a member of Ubuntu
Bugs
Public bug reported:
Binary package hint: evince
There is a bug above, "evince doesn't remember printing preferences". On
the contrary, it remembers them far too well.
When evince is closed and another document opened, the printer settings
should be taken from the printer setup. Instead, any cha
*** This bug is a duplicate of bug 161845 ***
https://bugs.launchpad.net/bugs/161845
** This bug has been marked a duplicate of bug 161845
Gutsy Thinkpad R40E keyboard failure
--
Gutsy Thinkpad R40E keyboard failure
https://bugs.launchpad.net/bugs/161846
You received this bug notification
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/10327468/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/10327469/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/10327470/ProcStatus.txt
--
print
Public bug reported:
Binary package hint: gedit
Pascal language is not case-sensitive but gedit in Gnome 2.20 handles
some Keywords like begin, end, function and so on as case-sensitive. For
these keywords it only accepts the form with a capital letter at the
beginning.
In Gnome 2.18 (Ubuntu 7.0
Same to me, using Gutsy/i386 stable.
My laptop is a Dell Vostro 1000, with an ATI radeon XPress 1100 IGP (chipset is
Ati RS485).
I had to manually edit /etc/usplash.conf and set the 1024x768
resolution, then edit grub and add "vga=0" to the kernel line. By doing
so, everything seems to work fine
** Summary changed:
- upgrade distro 7.04 to 7.10
+ problems upgrading distro 7.04 to 7.10
--
problems upgrading distro 7.04 to 7.10
https://bugs.launchpad.net/bugs/161840
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu
Public bug reported:
Problem:
The AMCAS login page does not load properly under Firefox 2.0.0.8. It seems to
constantly refresh itself without any results. Here is the link:
https://services.aamc.org/AMCAS2_2008/
The URL in the address bar alternates rapidly (twice per second)
between:
https:/
Public bug reported:
Fresh Install of Gutsy to R40E produces inoperable keyboard (UK or US)
due to poor operation of keys. Attmepted workarounds from the Keyboard
preferences or Accessibility adjustments fail to stop the inoperation of
keystrokes, although keys sticking down can be stopped by only
Public bug reported:
Fresh Install of Gutsy to R40E produces inoperable keyboard (UK or US)
due to poor operation of keys. Attmepted workarounds from the Keyboard
preferences or Accessibility adjustments fail to stop the inoperation of
keystrokes, although keys sticking down can be stopped by only
Public bug reported:
I use Ubuntu Gutsy. I have installed hplip-gui.
HPLIP Toolbox looks really ugly, the fonts are too big and it doesn't really
integrate in the standard ubuntu desktop. In Feisty HPLIP Toolbox looked much
better! Maybe additional KDE packages have to be installed so that it l
Public bug reported:
Please report this bug against the 'update-manager' package and include the
files in /var/log/dist-upgrade/ in the bugreport.
installArchives() failed
Apt.log:: Package libuniconf4.3 has broken dep on libuniconf4.2
Considering libuniconf4.2 -1 as a solution to libuniconf4.3
** Attachment added: "Screenshot"
http://launchpadlibrarian.net/10327270/Screenshot.jpg
--
HPLIP Toolbox looks ugly
https://bugs.launchpad.net/bugs/161843
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing
Sure, i'm attaching another. I'm worried that it's still not doing
anything useful though.
I think this might be because the program doesn't crash. It just
freezes up and I eventually have to force-quit it.
** Attachment added: "gdb-rhythmbox.txt"
http://launchpadlibrarian.net/10327172/gdb-rh
On-hold pending succesful build.
** Changed in: python-visual (Ubuntu)
Importance: Undecided => Wishlist
Assignee: (unassigned) => Andrea Gasparini (gaspa)
Status: New => In Progress
--
sync version 3.2.9-2 from Debian unstable
https://bugs.launchpad.net/bugs/161767
You received t
really, it's in progress. It must wait until gtk+1.2 builds. Perhaps
it's clearer to set it to "incomplete".
And I didn't want yet to subscribe u-u-s...
--
sync version 3.2.9-2 from Debian unstable
https://bugs.launchpad.net/bugs/161767
You received this bug notification because you are a member
yes thanks
--- Ralph Janke <[EMAIL PROTECTED]> wrote:
> Is it ok to close this report?
>
> Thanks
>
> --
> Booting fails after installation (GRUB error)
> https://bugs.launchpad.net/bugs/107951
> You received this bug notification because you are a
> direct subscriber
> of the bug.
>
__
Please use https://answers.edge.launchpad.net/ubuntu/gutsy , that's not
a bug.
** Changed in: ubuntu
Status: New => Invalid
--
update tool(7.04 to 7.10) crashed
https://bugs.launchpad.net/bugs/161833
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
Here too - kubuntu Gutsy 7.10: Update notifier window appeared after
installing compiz-fusion and can't be closed.
--
Adept Notifier tray icon appears and dissapears on login
https://bugs.launchpad.net/bugs/47988
You received this bug notification because you are a member of Kubuntu
Team, which i
There is indeed a discussion of this problem in the #vserver irclogs
available from http://irc.13thfloor.at/LOG/2006-11/LOG_2006-11-29.txt as
fmyhr pointed out.
The issue appears to arise from an incompatibility between stack-
protector and dietlibc, as far as I can tell.
Look at the part where
h
The same has happened to me!
Everything worked on Ubuntu 7.04, I upgraded to 7.10 and I find that the
monitor (16:9 TV) has big black lines on both the sides as 1024x768 is
4:3, To re-obtain 1360x768 I needed to use the ATI propriietary drivers.
After a long time I did it, but the sound is no lon
Hi to you All,
I continued to make my debug about this problem and I found the the access
permissions on the /var and the /var/log didn't permit any kind of access for
"other". I looked on my other server and set the access permissions as on that.
The problem disappeared!
I'm sorry if I created
I think I have fixed it. Although I have no idea how to create a package
for people to use, etc.
I downloaded the network-manager-gnome source from the ubuntu repository
and applied the attached patch that I got from: http://www.mail-
archive.com/[EMAIL PROTECTED]/msg06535.html
I believe the patc
I'm running Ubuntu 7.10, Workspace Switcher 2.20.0.1
Removing the applet and adding it back to panel seems to have fixed the
issue for now.
--
Workspace Switcher will not switch workspaces
https://bugs.launchpad.net/bugs/159121
You received this bug notification because you are a member of Ubunt
Thank you for your bug report. I can't reproduce this.
** Changed in: gnumeric (Ubuntu)
Importance: Undecided => Low
--
gnumeric does not show cell value after carriage return
https://bugs.launchpad.net/bugs/161249
You received this bug notification because you are a member of Ubuntu
Bugs, wh
Hold this Bug with status "In Progress" and when LP become Open Source change
to "Fix Released"
We need wait the Roadmap of LP, follow the plan ! please !
If Mark S. and all your team planned to release LP in Open Source on
future, it's should be better, so lets wait.
--
Launchpad should be fre
I meant by default in my previous comment.
--
gnumeric.mo missing in xubuntu 7.04 (at least german)
https://bugs.launchpad.net/bugs/110828
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lis
On Sat, Nov 10, 2007 at 11:35:54AM -, matteo sisti sette wrote:
> Hi,
>
> I have kubunto 7.10, i.e. the gutsy gibbon, and i experience the same
> problem.
>
> I boot the live CD and I can't access ANY of my hard disks, neither the
> internal one nor an external one (firewire).
>
> Icons do a
** Changed in: xserver-xorg-video-nv (Ubuntu)
Sourcepackagename: linux-restricted-modules-2.6.22 => xserver-xorg-video-nv
--
Nvidia driver not working with dual screen
https://bugs.launchpad.net/bugs/154049
You received this bug notification because you are a member of Ubuntu
Bugs, which is the b
Thank you, Laurent.
In the end I found it. Now the problem is that I cannot edit the key. It says:
"This key is not writable". I've tried to unset the key, but to no avail. do
you think that reverting to the Feisty kernel could still slve my problem? You
do that with the Synaptic manager, I sup
Lionel: is it possible to ship the language-pack-gnome-*-base ? If we
can't we shall close this.
** Changed in: gnumeric (Ubuntu)
Importance: Undecided => Low
--
gnumeric.mo missing in xubuntu 7.04 (at least german)
https://bugs.launchpad.net/bugs/110828
You received this bug notification bec
Public bug reported:
On importing photos from my Canon Ixus 60 digi cam via the gnome photo
import window, the checkbox rotate images does not take an effect.
In Feisty, the images were really rotated by the gnome photo import.
Since Gusty, the image rotation does no longer work for me.
Procedur
I guess that the i810 driver won't be fixed anymore since it is
deprecated.
** Changed in: xserver-xorg-video-i810 (Ubuntu)
Status: Confirmed => Invalid
--
totem overrides XV_CONSTRAST to wrong default value (Xv movies on i810/i945
have horrible colour/gamma)
https://bugs.launchpad.net/b
** Bug watch added: GNOME Bug Tracker #495594
http://bugzilla.gnome.org/show_bug.cgi?id=495594
** Also affects: gnumeric via
http://bugzilla.gnome.org/show_bug.cgi?id=495594
Importance: Unknown
Status: Unknown
** Changed in: gnumeric (Ubuntu)
Assignee: (unassigned) => Ubuntu
Could you please recheck it with Gutsy Final Live CD? In Gutsy i810
driver is deprecated and intel driver is used instead.
** Changed in: xserver-xorg-video-i810 (Ubuntu)
Sourcepackagename: xorg => xserver-xorg-video-i810
Status: Confirmed => Incomplete
--
Ubuntu 6.10 Edgy: Screen(s) foun
** Attachment added: "gdb-gnumeric.txt"
http://launchpadlibrarian.net/10327044/gdb-gnumeric.txt
--
Gnumeric crashes on selecting Format/Preferences
https://bugs.launchpad.net/bugs/152587
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for U
I could reproduce and will attach the backtrace and report upstream.
** Changed in: gnumeric (Ubuntu)
Status: Incomplete => Triaged
--
Gnumeric crashes on selecting Format/Preferences
https://bugs.launchpad.net/bugs/152587
You received this bug notification because you are a member of Ubu
Public bug reported:
Binary package hint: gnome-utils
gnome-system-log should be able to read compressed .gz log files.
** Affects: gnome-utils (Ubuntu)
Importance: Undecided
Status: New
--
gnome-system-log cannot read .gz logs
https://bugs.launchpad.net/bugs/161838
You received
A fix has been committed in 1.7.12.
** Changed in: gnumeric
Bugwatch: GNOME Bug Tracker #495545 => GNOME Bug Tracker #461284
** Changed in: gnumeric (Ubuntu)
Status: Triaged => Fix Committed
--
F4 does nt work consistently
https://bugs.launchpad.net/bugs/120953
You received this bug
Forgot to mention I'm running Ubuntu Gutsy
--
/fan dir empty!
https://bugs.launchpad.net/bugs/92117
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
Forgot to mention I'm running Ubuntu Gutsy
--
/fan dir empty!
https://bugs.launchpad.net/bugs/92117
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/
I have this problem on a Dell Optiplex GX280. Just like Dan Lewis, all
it takes is one intensive task and my computer leaves the fan on until I
reboot.
--
/fan dir empty!
https://bugs.launchpad.net/bugs/92117
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
I think that the bug should be assigned more to package xserver-xorg-
video-nv
--
Nvidia driver not working with dual screen
https://bugs.launchpad.net/bugs/154049
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mai
Public bug reported:
Hello,
I think that ksimus should be merged from Debian unstable.
** Affects: ksimus (Ubuntu)
Importance: Undecided
Assignee: Saša Bodiroža (jazzva)
Status: New
** Changed in: ksimus (Ubuntu)
Assignee: (unassigned) => Saša Bodiroža (jazzva)
--
ksim
I'm going to assume this was my fault, probably related to
authenticating on a Domain, and having two identical user names. So
I'll close the bug.
--
sudo will not authenticate when trying to apt-get
https://bugs.launchpad.net/bugs/104787
You received this bug notification because you are a memb
I'm going to assume this was my fault, probably related to
authenticating on a Domain, and having two identical user names. So
I'll close the bug.
** Changed in: sudo (Ubuntu)
Status: New => Invalid
--
sudo will not authenticate when trying to apt-get
https://bugs.launchpad.net/bugs/1047
Do you still have this issue ?
** Changed in: gnumeric (Ubuntu)
Status: New => Incomplete
--
can't print in landscape mode even when the print preview is correct
https://bugs.launchpad.net/bugs/58898
You received this bug notification because you are a member of Ubuntu
Bugs, which is the
401 - 500 of 667 matches
Mail list logo
