Had the same problem. The card ran fine using rt61-module in dapper, but I couldn't get it to work using the rt61pci-module in edgy. Have spent hours but could not get it to work.
But the card works flamelessly in edgy using the ratech drivers (rt61). Here is what I did: 1) i got the drivers from http://www.ralinktech.com/drivers/Linux/RT61_Linux_STA_Drv1.0.4.0.tar.gz 2) followed the readme to compile the kernel-module. the rt61-module compiles fine, as usual linux-headers were required. copied the firmware and the modified configuration file (set up ssid,wpa etc.) to /etc/Wireless/RT61STA/ Afterwards copied rt61.ko somewhere below /lib/modules/<kernel-version/ and run depmod 3) blacklisted the - broken? - ubuntu kernel module in /etc/modprobe.d/blacklist: blacklist rt61pci 4) added the ratech-module in /etc/modules and put an alias in /etc/modprobe.d/aliases: alias ra0 rt61 5) added the following lines to /etc/network/interfaces: iface ra0 inet static address 192.168.7.228 netmask 255.255.255.0 gateway 192.168.7.1 auto ra0 Works perfectly for me. -- rt61pci can't scan or associate https://launchpad.net/bugs/58117 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs