We have noticed this as well. Using VPN we use a special resolver to
handle private IP space, and now, looking into this further it does look
like the network-manager is ignoring the dns= specified in the system-
connections (set via the network manager settings gui).
My settings below, noting
I managed to bring both screens up at 30Hz by passing video resolutions
as kernel parameters
video=DP-3:3840x2160@30 video=DP-4:3840x2160@30
This means I do not have to do any display port replugging on startup.
I still have to manually change the refresh from 30Hz to 60Hz in the
settings. If
Public bug reported:
I recently started using a Cable-Matters-201355 with my XPS 9380 (8th
Gen TB3). The dock supports dual 4K DP @ 60Hz via thunderbolt with PD
input. (HBR3 compliant USB-C Dock (DSC/DP1.4 support) that uses all 4
high speed lanes to get dual 60Hz)
Both displays boot mirrored
Well, in the case of a Lenovo 4338, a quick google shows it is based on
the SMSC2517, (https://joes-tech-blog.blogspot.com/2017/09/whats-inside-
lenovo-docking-station-for.html) and well, another quick google show
SMSC was aquired by Microchip, and after a third Google, I can tell you
the USB
I would try and figure out what chip is used in the Ultradock; It might
have been like the Cypress based one I had, which also worked fine before
Ubuntu upgrade, broke, and then worked fine with current Ubuntu after a
firmware update to the chip.
If the Ultradock uses a thunderbolt connection,
Firmware update to my CableMatters thunderbolt/USB-C/PD dock seems to
have fixed my issues (no occurances since).
I suppose I have to assume that improved driver support in the newer
kernel may have exposed some issues in the hardware that were fixed with
the update.
Notably I can run dual 1440p
And sure enough, there is a firmware update:
https://www.cablematters.com/download/201055_201046/201055_201046_Firmware.zip
https://www.cablematters.com/cs-Downloads.aspx
Will report back...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
And the SDK for my Cypress replicator is documented here:
https://www.cypress.com/file/333231/download
Notably: Integrated bootloader to support firmware update over I2C
Maybe I can flash this thing to better support power/display modes,
assuming that is the nature of the issue
--
You
Most days, when this occurs, I just open up my lid and/or tap the power
button and it wakes up, and I close the lid again once it is awake.
In my particular case, when I wake up my laptop, my CableMatters
201055-BLK thunderbolt port replicator sends my dual display 1440p
monitors into 1080p
Here are a few more observations on this login sleep issue ('it') :
- not 100% of the time, does this occur
- I experimented with the input devices (logitech) enumerated before / after
login and saw no change/impact on it from that activity
- I have seen it on a reboot, without any state change
In my case, XPS 13 9380, 20.10, both external monitors via TB3/USB-C ->
2 x HDMI @ 1440p, internal Intel UHD 620
- no nVidia
- two external monitors, lid closed at boot
- no Dropbox
I do use a logitech USB keyboard and mouse (wireless USB dongle) at the
workstation where this occurs, in a
And here I attached what systemd-inhibit looks like just after I login,
but before my computer is put to sleep
** Attachment added: "systemd-inhibit just prior to sleep after login"
attached cleaner output of systemd-inhibit
** Attachment added: "systemd-inhibit"
https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1907687/+attachment/5442538/+files/systemd-inhibit.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Here is some additional info
root@imac-XPS-13-9365:~# systemd-inhibit
WHO UID USER PID COMMWHAT
WHY
MODE
ModemManager 0root
from systemctl confirms my wakeup from a sleep state using my
open-lid method described above. For anyone else on a 9380, it is worth
noting my hostname identifies an older 9365 XPS model I had previously.
- root@imac-XPS-13-9365:~# systemctl status sleep.target
- ● sleep.target - Sleep
-
pid=3278
comm="snap-confine" capability=4
capname="fsetid"
[ 34.031152] wlp2s0: deauthenticating from c4:71:54:05:39:d1 by local choice
(Reason:
3=DEAUTH_LEAVING)
Output from systemctl confirms my wakeup from a sleep state using my
open-lid method described above. For anyon
Can the maintainers please have a look at the following for rtl8812au
4.3.20,
https://github.com/diederikdehaas/rtl8812AU/tree/driver-4.3.20
It is working on my Ubuntu 16.10 and resolves the build issues with the
current 4.3.14 dkms source.
root@dottodesk:/usr/src# uname -a
Linux dottodesk
I noticed a similar bug #1541743 which describes the same problem,
except also with 4.2.0-27; Might suggest this issue is related to one
of the supporting packages related to the build process and not with a
specific kernel version.
--
You received this bug notification because you are a member
Below is the output after I made the change and continued the 16.04
dist-upgrade process.
820 upgraded, 17 newly installed, 3 to remove and 144 not upgraded.
215 not fully installed or removed.
Need to get 0 B/494 MB of archives.
After this operation, 142 MB of additional disk space will be used.
So,
I have no idea what happened; manual setting of localtime to UTC
(command below) fixed the configuration of the package, allowing the
upgrade to continue.
Anyway, I executed the following command to set to UTC, and then
proceeded to complete the dist-upgrade from 15.05, and the error from
Public bug reported:
Everything looks fine; Not sure what is invalid about the format. I am
EST, the output is in UTC.
Breaks the upgrade after from 15.05 at a point where is says it
completed with errors, but some 200+ packages remaining.
Setting up tzdata (2016a-1) ...
Current default
Public bug reported:
After upgrade and reboot to linux-image 4.2.0-30.36, the 8812au module
fails to load with following error
Reboot into 4.2.0-27.32 has no issues
~# modprobe 8812au
modprobe: ERROR: could not insert '8812au': Exec format error
~$ dkms status
rtl8812au,
Public bug reported:
Noticed there are some newer versions out there
https://github.com/diederikdehaas/rtl8812AU/blob/driver-4.3.22-beta/README.md
** Affects: rtl8812au (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of
Still present in 15.10; I rewired a new jack twice before I realized
what was going on here.
# lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller
(rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen
Core Processor Integrated
Still present in 15.10; I rewired a new jack twice before I realized
what was going on here.
# lspci
00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller
(rev 06)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen
Core Processor Integrated
Public bug reported:
Just a regular upgrade getting ready to bump to 15.10.
Grub-common failed with a systemd error that seemed to be related to a
dbus timeout of sorts. Anyways, if the info here is helpful, not sure
what happened.
I had returned from suspend just prior to initiating the
Updated here https://lkml.org/lkml/2014/5/22/685
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1089768
Title:
Marvell Sata controller and AMD-Vi problems
To manage notifications about this bug go
Looks like there is a patch here: https://lkml.org/lkml/2013/3/7/582
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1089768
Title:
Marvell Sata controller and AMD-Vi problems
To manage
Public bug reported:
In order to enable X11 forwarding from an external host you must
explicitly set the Xserver to listen by overriding the xserver-command.
Previously you could set the xserver-allow-tcp=true and it would do this
automatically.
I would have expected this change in behaviour to
While I was submitting this bug, the panel indicator jumped forwards.
So it appears to be an issue with the frequency of the update in the
panel. It seems to get as much as a half hour behind, noting it just
jumped from 10:21am to 10:57am as I was submitting the bug report.
** Summary changed:
Public bug reported:
Recently I have noticed that my clock is frozen. Clicking on the frozen
time in the indicator shows the current time in the dropdown (below the
calendar), however the displayed clock in the panel is never updated.
Rebooting does not resolve the problem, but gives me an
[ 1645.092461] systemd-udevd[4661]: Failed to apply ACL on
/dev/bus/usb/002/005: No such file or directory
The udev ACL fails because the device is already gone; Nowhere in lsusb
either.
imac@imachp:~$ lsusb
Bus 002 Device 003: ID 1bcf:2805 Sunplus Innovation Technology Inc.
Bus 002 Device 002: ID
ProcVersionSignature: Ubuntu 3.11.0-13.20-generic 3.11.6
Uname: Linux 3.11.0-13-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.12.5-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: imac 2900 F pulseaudio
/dev/snd/controlC0: imac
A dpkg -l | grep evolution reveals a mixed set of packages from
3.8.4-0ubuntu1 and 3.8.5-1ubuntu1, will all showing uptodate from
sources (including proposed).
Notably, evolution, evolution-common, evolution-plugins, evolution-ews,
and libevolution are 3.8.4 and evolution-data-server and
I also lost my clock today on current 13.10 beta while purging evolution
packages and configuration specific to evolution from various places
(gconf,.local,.cache,.config) to resolve some broken email accounts
which turned out just to be a hangover from gnome-online-accounts being
replaced by
partclone.ntfs is still affected by this bug. Looks like a
partclone.ntfs packaging issue, but I don't see a new bug created
following Phillip's comment above.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Happened to me setting the keyboard bindings for the Put Plugin from
compiz-plugins-extra. Current Raring Beta 2.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/899610
Title:
ccsm crashed with
I have just begun seeing this on my Ubuntu 13.04 Beta 2 system. It
started appearing in/around initial disk fsck/mounting and renders my
system unusable, with messages repeating nearly every second. Likely in
pairs every second or so much the same as the original reporter.
I believe in my case,
Public bug reported:
This error occurred following my upgrade to 13.04B2 from 12.10.
Upon loading evolution the error appears in the terminal window
(relevant lines shown below with email obfuscated). A similar error
message appears in Evolution above the message list, and in the preview
area
** Bug watch added: GNOME Bug Tracker #698099
https://bugzilla.gnome.org/show_bug.cgi?id=698099
** Also affects: evolution via
https://bugzilla.gnome.org/show_bug.cgi?id=698099
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of
Still occuring in Raring beta 2. Running as root (via sudo or
otherwise) is not a solution, as then it simply cleans gconf for the
root user.
In my case the issue is not reproducible using the root user, however I
need to save and clean keys for my day-to-day user which has years of
cruft.
--
I see this with evolution and overlay scrollbars disabled.
I disabled overlay scrollbars with:
$gsettings set com.canonical.desktop.interface scrollbar-mode normal
(evolution:13228): Gtk-WARNING **: GtkScrolledWindow 0x7f8fa3f4faa0 is mapped
but visible child GtkScrollbar 0x7f8fa409c540 is
Totally repeatable for me, on boot almost every time. I think it has
something to do with evolution-ews.
--- stack trace ---
#0 0x00406897 in update_appointment_menu_items (unused=optimized
out) at datetime-service.c:736
source = 0x7f2740094d80
ecal = 0x0
** Bug watch added: GNOME Bug Tracker #601727
https://bugzilla.gnome.org/show_bug.cgi?id=601727
** Also affects: evolution via
https://bugzilla.gnome.org/show_bug.cgi?id=601727
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of
12.10, compiz hits 100%, log in from another desktop and execute a
SIGABRT and compiz crashes hard, attached dump
** Attachment added: apport dump from compiz crash
https://bugs.launchpad.net/ubuntu/+source/compiz/+bug/773564/+attachment/3463037/+files/_usr_bin_compiz.1000.crash
--
You
Public bug reported:
Running current Evolution 3.6.0-0ubuntu3 on 12.10. Today, starting
evolution from command line shows the following message and evolution
fails to start.
ERROR **: Error calling StartServiceByName for
org.gnome.evolution.dataserver.Sources0: Timeout was reached
I have EWS,
A closer look, it appears that evolution is segfaulting. I actually
expected apport to pick these up on its own, but I guess something must
have changed with the automatic crash detection, despite having
enabled=1 in my /etc/default/apport.
root@imachp:~# dmesg | grep evol
[ 193.201403]
Thanks, removing davmail resolved for me too. Noting that with
evolution-ews now present, davmail is also no longer required for my
usecase (evolution + exchange ews).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
The Validity Sensors Inc. VFS471 on my HP 8560w is not recognized by
libfprint
138a:003c Validity Sensors, Inc. VFS471 Fingerprint Reader
Hoping that someday it will be supported.
** Affects: libfprint (Ubuntu)
Importance: Undecided
Status: New
** Tags:
pvremove could not find the device in my case. It said Couldn't find
device. Check your filters? with -ff and Physical Volume /dev/sda5
note found without -ff. pvck and pvscan were of no use identifying
the label, however I knew that I had moved LVM from /dev/sda5 to
/dev/sda6 using the
** Bug watch added: GNOME Bug Tracker #679650
https://bugzilla.gnome.org/show_bug.cgi?id=679650
** Also affects: evolution-mapi via
https://bugzilla.gnome.org/show_bug.cgi?id=679650
Importance: Unknown
Status: Unknown
** Summary changed:
- Ubuntu 11.10 Evo 3.2.1 MAPI send mail
And guess what; This server side tweak fixed a few mobile clients that
use our VPN that would not get DNS resolution, likely using similar
domain based routing like dnsmasq.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Wow, it took me a while to find this post. For OpenVPN users
specifically, there should be some sort of release note addition that
explains that having the DNS push is no longer enough to have VPN dns
resolution work.
i.e. Your OpenVPN DNS will no longer resolve resolve if you do not have
the
You should not have to, as it is already part of Oneric or newer, per
the Fix Released tag next to the Ubuntu package at the top of this bug
report and noted in the revision log below (also linked above).
http://bazaar.launchpad.net/~ubuntu-branches/ubuntu/oneiric/evolution-
This resolved the issue for myself; thanks. I suspect perhaps it was
introduced sometime after 12.04B1 (when I upgraded), if it is not
present in the final release.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
at me in the outputs below.
imac@repo:~$ dmesg | grep r8169
[2.146842] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[2.146873] r8169 :0a:00.0: PCI INT A - GSI 19 (level, low) - IRQ 19
[2.146948] r8169 :0a:00.0: setting latency timer to 64
[2.147003] r8169 :0a:00.0: irq
The IPV6 was not my issue (or might have been secondary). Even with
Ignore my dnsmasq services are not responding to DHCP requests.
Things look good from the process output (which shows flags, etc for
dnsmasq) but no joy when inspecting the wire for DHCP request/response.
A separate issue in any
The IPV6 was not my issue (or might have been secondary). Even with
Ignore my dnsmasq services are not responding to DHCP requests.
Things look good from the process output (which shows flags, etc for
dnsmasq) but no joy when inspecting the wire for DHCP request/response.
A separate issue in any
Hmm. I just created a Hotspot via Network Settings in 12.04, and it has
put IPV6 in automatic. I noticed dnsmasq wasn't active and found this
post.
Switching to ignore.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to dnsmasq in
Hmm. I just created a Hotspot via Network Settings in 12.04, and it has
put IPV6 in automatic. I noticed dnsmasq wasn't active and found this
post.
Switching to ignore.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Recently I changed my Google password.I use Gnome-Online-Accounts to
manage access to my Google accounts for chat, calendar, email, contacts
and documents.
Upon boot today, I received a prompt that something needs attention with
my GOA Online Accounts, and was presented
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/987276
Title:
Google Expired Credentials cannot be reset
To manage notifications about this bug go to:
IMHO, this is the *new* expected behavior. If both the raid members
left the array in a good state (i.e. you unplugged one while the system
was off) then you need to zero the superblock to get it back into the
array.
I suspect your test case would work with a disk that only had the
structures,
Public bug reported:
I believe this is actually a regression in the Nautilus UI, or there is
a non-intuitive preference I can not seem to locate.
At one point in earlier Nautilus versions (not sure when, maybe 11.04 or
earlier) there was always an Up Arrow icon that allowed you to
navigate up
** Description changed:
I believe this is actually a regression in the Nautilus UI, or there is
a non-intuitive preference I can not seem to locate.
At one point in earlier Nautilus versions (not sure when, maybe 11.04 or
earlier) there was always an Up Arrow icon that allowed you to
I think this should get a regression tag based on the observation of the
feature in previous Ubuntu versions as shown in my attachment. The
upstream bug report has been added as well.
** Attachment added: Comparison of Nautilus Location Bar across Ubuntu
versions
Thats the bug; In my case I can not get to the pathbar made of buttons.
I'm going to rename to be clear.
** Summary changed:
- File Browser Navigation missing Parent Directory icon
+ File Browser Navigation missing default icon Path Bar
--
You received this bug notification because you are a
Reset.. back to how I expect it. Not sure how/why it changed, but reset
= defualt = fixed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/979040
Title:
File Browser Navigation missing default icon
Just happened a short while after reboot in my case.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/950765
Title:
tracker-extract crashed with SIGSEGV in MemStream::getChar()
To manage
In my case, 12.04, current beta, upon suspend resume 0.16.0-0ubuntu1
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/867682
Title:
telepathy-gabble crashed with signal 5 in
Its not 100% repeatable, and this time I did it again to capture the
Oops via my camera (no external console) and it didn't happen AND I had
to still hit ESC to see the console (which I am pretty sure I didn't do,
as I didn't think I had to on the console which is the reason I
suggested starting
I can confirm this. You can flip over to a console using ALT-CTL-F1 and
then login, become root and use the shutdown -h now command and see
the kernel oops a la fglrx.
My setup is an HP DV7 with HD3400 seen via lspci as ATI RV620 [Mobility
Radeon HD 3400 Series]
I am uptodate with current fglrx
resolved and working great for me so far, already saved me time today.
thanks MTL
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/957695
Title:
New or modified contacts sync incorrectly to Google My
resolved and working great for me so far, thanks MTL
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/955707
Title:
Unable to modify or update Google calendar events
To manage notifications about
Upstream has committed, and a rebaselined version for 3-2 is working
fine against current sources. This effectively makes Google Contacts
work, so it would be great to include with 12.04 pls.
Without it, when you add a Google contact two very confusing things happen
a) initially it does not
This patch resolves the Google contact issues with Evolution 3.2.3 in
12.04 Beta
** Patch added: Patch to correct Google contacts handling
https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/957695/+attachment/2968204/+files/eds_google_fix.patch
--
You received this bug notification
It appears to have gone away.. no re-occurrences in the last week or so
as a heavy daily user; Seems to be resolved in my case.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/928275
Title:
Any reason this patch hasn't made its way into current 12.04 Beta? I
have been using it for quite some time and want to avoid setting
selections manually.
It is a simple, straightforward fix, for a 100% repeatable issue that
has been triaged and patched upstream.
Along with recently released
@Daniel Told, running --reset might be influenced by DISPLAY if you are
using a new console (CTL-ALT-F1) so you can see what you are typing (vs
CTL-ALT-T method)
My specific steps to resolve were as follows
a) Login with [username] and get *stuck* on blank screen
b) CTL-ALT-F1
c) Logged in as
Just occurred on current 12.04 Beta
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/193257
Title:
apt-listchanges crashed with AttributeError in __init__()
To manage notifications about this bug go
Private bug reported:
Happened while shutting down evolution; It might be related to #837292
ProblemType: Crash
DistroRelease: Ubuntu 12.04
Package: shotwell 0.11.93-0ubuntu2
ProcVersionSignature: Ubuntu 3.2.0-20.32-generic 3.2.12
Uname: Linux 3.2.0-20-generic x86_64
NonfreeKernelModules: fglrx
Something similar happened to me in 12.04 Beta.. might be a dupe; filed
my bug anyways with updated info
https://bugs.launchpad.net/ubuntu/+source/shotwell/+bug/963208
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
This is resolved for me in current 12.04 Beta 3.2.3ubuntu3 EDS
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/762187
Title:
recurring 10 min invalid query dialog box from google contact sync
To
Upstream patch works to resolve this issue. I have tested it against
12.04 3.2.3 sources and it seems to be working well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/957695
Title:
New or
Maybe dpkg suggested or recommends... there must be policy around this a
package maintainer can quote to help with the decision.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/955673
Title:
Ubuntu
Upstream patch appears to resolve this issue, patch attached
** Patch added: Upstream fix for glib threading
https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/847578/+attachment/2905029/+files/eds_glibfix.patch
--
You received this bug notification because you are a
Upstream patches seem to be working well so far against Ubuntu sources.
Really excited about getting this one into 12.04.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/847578
Title:
It seems to have moved to fix-released for the package.. but the bug-
notifier did it.. I don't see any change to the package other then
upstream commits, which do resolved the issue (potentially).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Sounds like a duplicate of https://bugs.launchpad.net/ubuntu/+source
/evolution-data-server/+bug/854232.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/884933
Title:
eds keeps prompting me for
could be related to the libical bug which is a regression on the
get+property, possible some escaped characters in the offset. If so
likely fixed when https://bugs.launchpad.net/ubuntu/+source/evolution-
data-server/+bug/955707 is addressed.
--
You received this bug notification because you are
Public bug reported:
Evolution was not properly assigning groups to new or modified contacts.
Specifically, new contacts would often land in Other Contacts instead
of My Contacts when using the quick Add to Contacts... for email
addresses.
Additionally existing Google My Contacts that were
** Bug watch added: GNOME Bug Tracker #663324
https://bugzilla.gnome.org/show_bug.cgi?id=663324
** Also affects: evolution via
https://bugzilla.gnome.org/show_bug.cgi?id=663324
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of
This is now resolved in current 11.10 packages, as well as the new 12.04
Beta
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to ocfs2-tools in Ubuntu.
https://bugs.launchpad.net/bugs/756894
Title:
mount.ocfs2: join errors when node
This bug no longer affects me on the 12.04 B1; Thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/889120
Title:
Compiz chewing CPU/spinning when vertical scroll exists
To manage notifications
There is a couchdb package that is probably the right place for this; I
think I can change the tag
ii evolution-couchdb 0.5.91-0ubuntu7
Evolution support for CouchDB databases
ii evolution-couchdb-backend
Still not working after suspend on current 12.04 Beta (3.2.0-18-generic
#29-Ubuntu)
0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 02)
Subsystem: Hewlett-Packard Company Device 30fc
Flags: bus master, fast
After suspend, network manager is doing its interface discover
animation,
I just pull up a terminal and run this little script, and Network
Manager blinks (as the interface disappears and comes back) and eth0
comes back up.
imac@repo:~$ cat /usr/local/bin/fixnet
#!/bin/sh
rmmod r8169
modprobe
Fixed in 12.04B, upstream as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/761037
Title:
Evolution failed to properly migrate Local Contacts during 2.32
(Natty) Upgrade
To manage
There's another bug, I suspect is this one, but newer with upstream
links.
https://bugs.launchpad.net/linux/+bug/771857
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/292714
Title:
Wired Ethernet
Public bug reported:
When attempting to save a modified event (update a meeting date and time to
tomorrow), evolution returns:
»Cannot modify calendar object: Unexpected HTTP status code 412 returned
(Existing event has different ETag)«
This also occurs when trying to update attendee status
1 - 100 of 501 matches
Mail list logo