** Package changed: linux (Ubuntu) => ubiquity (Ubuntu)
** Changed in: ubiquity (Ubuntu)
Status: Incomplete => New
** Attachment added: "O1081221_V_20140930_1655291.mp4"
https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1382464/+attachment/4238843/+files/O1081221_V_20140930_16552
Public bug reported:
During OOBE, select “Connect to this network” item and choose a WLAN AP. Then,
enter WLAN AP password and press “Connect” button to connect it in the Wireless
page.
Wait for few seconds, system connected to WLAN. But, there is NOT “Continue”
button to go to the next page. A
Log from fail system
** Attachment added: "Log.zip"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1380998/+attachment/4235498/+files/Log.zip
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/13
The issue can be reproduced with an Asus ML248H (
http://www.asus.com/Monitors_Projectors/ML248H/ ) connected via D-Sub.
and ViewSonic VS15562 but can not with Benq E2200HD LCD
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
System may sometimes hang on suspend. When this happens, although it
still shows light-locker on display, the system stops responding. Most
of the time this will happen within 5 times of s3 test,
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
The system hang on "Log in" screen when performing suspend in Ubuntu 14.04.
When issue occurred,Keyboard/Mouse not respond. Press power button once also no
response.
Need to shutdown system via long press power button.
HW Configuration:
CPU:Core-i5-4690S 3.2G GT2 HSW 1150 6
Public bug reported:
Blank screen and system hung up when system enter suspend with Ubuntu 14.04.
When this issue occurred,the LED of power button is on, Keyboard and Mouse not
responded. Press power button once also no response. Need to press power button
for long time to shot down the system t
This issue looks like the monitor state stays in blank (the monitor is on)
after resuming from S3.
But, the 'xset dpms force on' can not recovery this state.
We need to do 'xset dpms force off' before 'xset dpms force on'.
We only found that the intel graphic register is different after this
issu
1. When resuming from S3, there is only black screen(not 'no signal').
But, we can recover it by 'xset dpms force off ; xset dpms force on'.
2. There is no any error or warning message on the dmesg or Xorg.
3. I used the D-Sub port.
--
You received this bug notification because you are a me
