** Attachment added: "networkdriverswitch"
http://launchpadlibrarian.net/21850721/networkdriverswitch
--
Onboard Ethernet does not work on D945GCLF under 2.6.27-9-generic or
2.6.27-11-generic
https://bugs.launchpad.net/bugs/323558
You received this bug notification because you are a member
Public bug reported:
Motherboard = Intel Atom D945GCLF
On board Ethernet = 01:00.0 Ethernet controller: Realtek Semiconductor Co.,
Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Using kernel 2.6.27-7-generic the on board Ethernet works fine with no
issues. Upgrading to eit
Sorry for not replying sooner.
I am currently running:
uname -a
Linux neil-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
GNU/Linux
WIth no issues with the X1800XT. It works in Dual Screen setup too.
I have attached Xorg.conf for reference, although I don't know how
useful
I can confirm that when a standard monitor is attached the screen works
as expected with no problems. I did notice however that the actual
installed OS is "Mythbuntu" I am going to format the hard drive and
install Ubuntu to if this alleviates the problem
--
X won't start in 8.10 - D945GCLF & P
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
Public bug reported:
I cannot install the IPTables::IPv4 package via cpan.
Full details are available on this forum thread which I created:
http://www.linuxquestions.org/questions/linux-software-2/problems-
installing-iptablesipv4-650382/
I am running version 8.04
** Affects: ubuntu
Impor
I also have a problem with the r8101 chipset. I get incredibly poor
intermittent connectivity.
At boot the kernel loads the r8169 module and assigns it to the Ethernet
port. If I do a rmmod and insmod the 8101 driver it works fine.
I have tried blacklisting the r8169 driver but it seems to have
Public bug reported:
Binary package hint: powernowd
In Hardy Heron, powernowd is installed by default and runs without the
-n option. This means nice processes are ignored in the calculations.
I don't think this is a suitable configuration for a desktop PC, as
there is no battery life concern a
*** This bug is a duplicate of bug 274639 ***
https://bugs.launchpad.net/bugs/274639
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18408124/Dependencies.txt
** Attachment added: "Devices.txt"
http://launchpadlibrarian.net/18408125/Devices.txt
** Attachment adde
I have a similar problem, in both 8.04 and 8.10b
My menu.lst always sets the root as hd(2,x) but it should be hd(0,x)
Please let me know if anyone needs any more info from me, I will be glad
to help.
--
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received t
I have tried 3 xorg.conf files...here they are:
** Attachment added: "xorg.conf1.txt"
http://launchpadlibrarian.net/19434644/xorg.conf1.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of
** Attachment added: "xorg.conf2.txt"
http://launchpadlibrarian.net/19434649/xorg.conf2.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "xorg.conf3.txt"
http://launchpadlibrarian.net/19434661/xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I can confirm grub displays as expected and I can use the virtual
terminals when ubuntu has loaded
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Sorry for not mentioning this in my original post. I have tried both of
these methods a few times but the xorg.conf file is always rebuilt as
the attached xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification b
I will try it with a standard monitor when I get a chance. I suspect it
will work too, but as I said it worked with the TV previously.
Here is the manual for the TV and as far as I can see it supports
standard VGA inputs.
http://dlc.panasonic-europe-
service.com/EUDocs/GetDoc.aspx?did=159842&fmt
I have now upgraded the final release version of Intrepid and am having
the same issue
** Attachment added: "failsafeX-backup-081031082341.tar"
http://launchpadlibrarian.net/19131552/failsafeX-backup-081031082341.tar
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https
Public bug reported:
I recently upgraded to 8.10 and now I am faced with a black screen on
boot (I still hear the Ubuntu Drums). I can access the vty terminals
and login etc so I know the machine hasn't crashed.
I assume this is something to do with the fact my xorg.conf is now
pretty sparse.
T
Public bug reported:
I am running the Beta of Intrepid Ibex and have an ATI 1800XT graphics
card installed
I used System -> Administration - > Hardware Drivers to enable the
driver for the card but whenever I boot it says that the machine
couldn't detect settings and everytime I end up clicking l
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/18751513/xorg.conf
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/18751571/Xorg.0.log
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I can now confirm that the bug is fixed in the new kernel!
The port still doesn't work but I guess that is now a driver issue.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Fri, 29 Aug 2008 01:36:32 +
> Subject: [Bug 240071] Re: BUG: soft l
Hi,
I have installed this kernel on my server and enabled the on board LAN
that was causing the problem.
I haven't yet attempted to use the port for connectivity but I did
notice that the drops was ranking up very quickly (millions per second).
This is without any cable plugged in. I then config
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
I also have a problem with the r8101 chipset. I get incredibly poor
intermittent connectivity.
At boot the kernel loads the r8169 module and assigns it to the Ethernet
port. If I do a rmmod and insmod the 8101 driver it works fine.
I have tried blacklisting the r8169 driver but it seems to have
Public bug reported:
Binary package hint: powernowd
In Hardy Heron, powernowd is installed by default and runs without the
-n option. This means nice processes are ignored in the calculations.
I don't think this is a suitable configuration for a desktop PC, as
there is no battery life concern a
*** This bug is a duplicate of bug 274639 ***
https://bugs.launchpad.net/bugs/274639
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18408124/Dependencies.txt
** Attachment added: "Devices.txt"
http://launchpadlibrarian.net/18408125/Devices.txt
** Attachment adde
I have a similar problem, in both 8.04 and 8.10b
My menu.lst always sets the root as hd(2,x) but it should be hd(0,x)
Please let me know if anyone needs any more info from me, I will be glad
to help.
--
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received t
Hi,
I have installed this kernel on my server and enabled the on board LAN
that was causing the problem.
I haven't yet attempted to use the port for connectivity but I did
notice that the drops was ranking up very quickly (millions per second).
This is without any cable plugged in. I then config
I can now confirm that the bug is fixed in the new kernel!
The port still doesn't work but I guess that is now a driver issue.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Fri, 29 Aug 2008 01:36:32 +
> Subject: [Bug 240071] Re: BUG: soft l
Public bug reported:
I am running the Beta of Intrepid Ibex and have an ATI 1800XT graphics
card installed
I used System -> Administration - > Hardware Drivers to enable the
driver for the card but whenever I boot it says that the machine
couldn't detect settings and everytime I end up clicking l
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/18751513/xorg.conf
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/18751571/Xorg.0.log
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Public bug reported:
I recently upgraded to 8.10 and now I am faced with a black screen on
boot (I still hear the Ubuntu Drums). I can access the vty terminals
and login etc so I know the machine hasn't crashed.
I assume this is something to do with the fact my xorg.conf is now
pretty sparse.
T
Sorry for not mentioning this in my original post. I have tried both of
these methods a few times but the xorg.conf file is always rebuilt as
the attached xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification b
I will try it with a standard monitor when I get a chance. I suspect it
will work too, but as I said it worked with the TV previously.
Here is the manual for the TV and as far as I can see it supports
standard VGA inputs.
http://dlc.panasonic-europe-
service.com/EUDocs/GetDoc.aspx?did=159842&fmt
I have now upgraded the final release version of Intrepid and am having
the same issue
** Attachment added: "failsafeX-backup-081031082341.tar"
http://launchpadlibrarian.net/19131552/failsafeX-backup-081031082341.tar
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https
I have tried 3 xorg.conf files...here they are:
** Attachment added: "xorg.conf1.txt"
http://launchpadlibrarian.net/19434644/xorg.conf1.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of
** Attachment added: "xorg.conf2.txt"
http://launchpadlibrarian.net/19434649/xorg.conf2.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "xorg.conf3.txt"
http://launchpadlibrarian.net/19434661/xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I can confirm grub displays as expected and I can use the virtual
terminals when ubuntu has loaded
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I cannot install the IPTables::IPv4 package via cpan.
Full details are available on this forum thread which I created:
http://www.linuxquestions.org/questions/linux-software-2/problems-
installing-iptablesipv4-650382/
I am running version 8.04
** Affects: ubuntu
Impor
** Attachment added: "networkdriverswitch"
http://launchpadlibrarian.net/21850721/networkdriverswitch
--
Onboard Ethernet does not work on D945GCLF under 2.6.27-9-generic or
2.6.27-11-generic
https://bugs.launchpad.net/bugs/323558
You received this bug notification because you are a member
Public bug reported:
Motherboard = Intel Atom D945GCLF
On board Ethernet = 01:00.0 Ethernet controller: Realtek Semiconductor Co.,
Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Using kernel 2.6.27-7-generic the on board Ethernet works fine with no
issues. Upgrading to eit
Sorry for not replying sooner.
I am currently running:
uname -a
Linux neil-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
GNU/Linux
WIth no issues with the X1800XT. It works in Dual Screen setup too.
I have attached Xorg.conf for reference, although I don't know how
useful
I can confirm that when a standard monitor is attached the screen works
as expected with no problems. I did notice however that the actual
installed OS is "Mythbuntu" I am going to format the hard drive and
install Ubuntu to if this alleviates the problem
--
X won't start in 8.10 - D945GCLF & P
** Attachment added: "networkdriverswitch"
http://launchpadlibrarian.net/21850721/networkdriverswitch
--
Onboard Ethernet does not work on D945GCLF under 2.6.27-9-generic or
2.6.27-11-generic
https://bugs.launchpad.net/bugs/323558
You received this bug notification because you are a member
Public bug reported:
Motherboard = Intel Atom D945GCLF
On board Ethernet = 01:00.0 Ethernet controller: Realtek Semiconductor Co.,
Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Using kernel 2.6.27-7-generic the on board Ethernet works fine with no
issues. Upgrading to eit
Sorry for not replying sooner.
I am currently running:
uname -a
Linux neil-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
GNU/Linux
WIth no issues with the X1800XT. It works in Dual Screen setup too.
I have attached Xorg.conf for reference, although I don't know how
useful
I can confirm that when a standard monitor is attached the screen works
as expected with no problems. I did notice however that the actual
installed OS is "Mythbuntu" I am going to format the hard drive and
install Ubuntu to if this alleviates the problem
--
X won't start in 8.10 - D945GCLF & P
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
Public bug reported:
I cannot install the IPTables::IPv4 package via cpan.
Full details are available on this forum thread which I created:
http://www.linuxquestions.org/questions/linux-software-2/problems-
installing-iptablesipv4-650382/
I am running version 8.04
** Affects: ubuntu
Impor
I can now confirm that the bug is fixed in the new kernel!
The port still doesn't work but I guess that is now a driver issue.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Fri, 29 Aug 2008 01:36:32 +
> Subject: [Bug 240071] Re: BUG: soft l
I also have a problem with the r8101 chipset. I get incredibly poor
intermittent connectivity.
At boot the kernel loads the r8169 module and assigns it to the Ethernet
port. If I do a rmmod and insmod the 8101 driver it works fine.
I have tried blacklisting the r8169 driver but it seems to have
Public bug reported:
Binary package hint: powernowd
In Hardy Heron, powernowd is installed by default and runs without the
-n option. This means nice processes are ignored in the calculations.
I don't think this is a suitable configuration for a desktop PC, as
there is no battery life concern a
*** This bug is a duplicate of bug 274639 ***
https://bugs.launchpad.net/bugs/274639
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18408124/Dependencies.txt
** Attachment added: "Devices.txt"
http://launchpadlibrarian.net/18408125/Devices.txt
** Attachment adde
I have a similar problem, in both 8.04 and 8.10b
My menu.lst always sets the root as hd(2,x) but it should be hd(0,x)
Please let me know if anyone needs any more info from me, I will be glad
to help.
--
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received t
Hi,
I have installed this kernel on my server and enabled the on board LAN
that was causing the problem.
I haven't yet attempted to use the port for connectivity but I did
notice that the drops was ranking up very quickly (millions per second).
This is without any cable plugged in. I then config
Sorry for not mentioning this in my original post. I have tried both of
these methods a few times but the xorg.conf file is always rebuilt as
the attached xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification b
I will try it with a standard monitor when I get a chance. I suspect it
will work too, but as I said it worked with the TV previously.
Here is the manual for the TV and as far as I can see it supports
standard VGA inputs.
http://dlc.panasonic-europe-
service.com/EUDocs/GetDoc.aspx?did=159842&fmt
Public bug reported:
I recently upgraded to 8.10 and now I am faced with a black screen on
boot (I still hear the Ubuntu Drums). I can access the vty terminals
and login etc so I know the machine hasn't crashed.
I assume this is something to do with the fact my xorg.conf is now
pretty sparse.
T
I have now upgraded the final release version of Intrepid and am having
the same issue
** Attachment added: "failsafeX-backup-081031082341.tar"
http://launchpadlibrarian.net/19131552/failsafeX-backup-081031082341.tar
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https
I have tried 3 xorg.conf files...here they are:
** Attachment added: "xorg.conf1.txt"
http://launchpadlibrarian.net/19434644/xorg.conf1.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of
** Attachment added: "xorg.conf2.txt"
http://launchpadlibrarian.net/19434649/xorg.conf2.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "xorg.conf3.txt"
http://launchpadlibrarian.net/19434661/xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I can confirm grub displays as expected and I can use the virtual
terminals when ubuntu has loaded
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I am running the Beta of Intrepid Ibex and have an ATI 1800XT graphics
card installed
I used System -> Administration - > Hardware Drivers to enable the
driver for the card but whenever I boot it says that the machine
couldn't detect settings and everytime I end up clicking l
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/18751513/xorg.conf
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/18751571/Xorg.0.log
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
I can now confirm that the bug is fixed in the new kernel!
The port still doesn't work but I guess that is now a driver issue.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Fri, 29 Aug 2008 01:36:32 +
> Subject: [Bug 240071] Re: BUG: soft l
I also have a problem with the r8101 chipset. I get incredibly poor
intermittent connectivity.
At boot the kernel loads the r8169 module and assigns it to the Ethernet
port. If I do a rmmod and insmod the 8101 driver it works fine.
I have tried blacklisting the r8169 driver but it seems to have
Public bug reported:
Binary package hint: powernowd
In Hardy Heron, powernowd is installed by default and runs without the
-n option. This means nice processes are ignored in the calculations.
I don't think this is a suitable configuration for a desktop PC, as
there is no battery life concern a
*** This bug is a duplicate of bug 274639 ***
https://bugs.launchpad.net/bugs/274639
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18408124/Dependencies.txt
** Attachment added: "Devices.txt"
http://launchpadlibrarian.net/18408125/Devices.txt
** Attachment adde
I have a similar problem, in both 8.04 and 8.10b
My menu.lst always sets the root as hd(2,x) but it should be hd(0,x)
Please let me know if anyone needs any more info from me, I will be glad
to help.
--
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received t
Public bug reported:
I am running the Beta of Intrepid Ibex and have an ATI 1800XT graphics
card installed
I used System -> Administration - > Hardware Drivers to enable the
driver for the card but whenever I boot it says that the machine
couldn't detect settings and everytime I end up clicking l
** Attachment added: "xorg.conf"
http://launchpadlibrarian.net/18751513/xorg.conf
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/18751571/Xorg.0.log
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https://bugs.launchpad.net/bugs/286685
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I can now confirm that the bug is fixed in the new kernel!
The port still doesn't work but I guess that is now a driver issue.
> From: [EMAIL PROTECTED]
> To: [EMAIL PROTECTED]
> Date: Fri, 29 Aug 2008 01:36:32 +
> Subject: [Bug 240071] Re: BUG: soft l
I also have a problem with the r8101 chipset. I get incredibly poor
intermittent connectivity.
At boot the kernel loads the r8169 module and assigns it to the Ethernet
port. If I do a rmmod and insmod the 8101 driver it works fine.
I have tried blacklisting the r8169 driver but it seems to have
Public bug reported:
Binary package hint: powernowd
In Hardy Heron, powernowd is installed by default and runs without the
-n option. This means nice processes are ignored in the calculations.
I don't think this is a suitable configuration for a desktop PC, as
there is no battery life concern a
*** This bug is a duplicate of bug 274639 ***
https://bugs.launchpad.net/bugs/274639
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/18408124/Dependencies.txt
** Attachment added: "Devices.txt"
http://launchpadlibrarian.net/18408125/Devices.txt
** Attachment adde
I have a similar problem, in both 8.04 and 8.10b
My menu.lst always sets the root as hd(2,x) but it should be hd(0,x)
Please let me know if anyone needs any more info from me, I will be glad
to help.
--
grub guessed BIOS disk order incorrectly
https://bugs.launchpad.net/bugs/8497
You received t
Hi,
I have installed this kernel on my server and enabled the on board LAN
that was causing the problem.
I haven't yet attempted to use the port for connectivity but I did
notice that the drops was ranking up very quickly (millions per second).
This is without any cable plugged in. I then config
I get the same problem running an Intel atom board,
Mine says
BUG: soft lockup - CPU#0 stuck for 11s! [kacpid:44]
I ntoiced that the box is still pingable once it has crashed but I
cannot ssh in. If anyone wants further details I am happy to post any
outpur you deem relevant
--
BUG: soft lock
Public bug reported:
I cannot install the IPTables::IPv4 package via cpan.
Full details are available on this forum thread which I created:
http://www.linuxquestions.org/questions/linux-software-2/problems-
installing-iptablesipv4-650382/
I am running version 8.04
** Affects: ubuntu
Impor
Sorry for not replying sooner.
I am currently running:
uname -a
Linux neil-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686
GNU/Linux
WIth no issues with the X1800XT. It works in Dual Screen setup too.
I have attached Xorg.conf for reference, although I don't know how
useful
I can confirm that when a standard monitor is attached the screen works
as expected with no problems. I did notice however that the actual
installed OS is "Mythbuntu" I am going to format the hard drive and
install Ubuntu to if this alleviates the problem
--
X won't start in 8.10 - D945GCLF & P
Public bug reported:
I cannot install the IPTables::IPv4 package via cpan.
Full details are available on this forum thread which I created:
http://www.linuxquestions.org/questions/linux-software-2/problems-
installing-iptablesipv4-650382/
I am running version 8.04
** Affects: ubuntu
Impor
Sorry for not mentioning this in my original post. I have tried both of
these methods a few times but the xorg.conf file is always rebuilt as
the attached xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification b
I will try it with a standard monitor when I get a chance. I suspect it
will work too, but as I said it worked with the TV previously.
Here is the manual for the TV and as far as I can see it supports
standard VGA inputs.
http://dlc.panasonic-europe-
service.com/EUDocs/GetDoc.aspx?did=159842&fmt
Public bug reported:
I recently upgraded to 8.10 and now I am faced with a black screen on
boot (I still hear the Ubuntu Drums). I can access the vty terminals
and login etc so I know the machine hasn't crashed.
I assume this is something to do with the fact my xorg.conf is now
pretty sparse.
T
I have now upgraded the final release version of Intrepid and am having
the same issue
** Attachment added: "failsafeX-backup-081031082341.tar"
http://launchpadlibrarian.net/19131552/failsafeX-backup-081031082341.tar
--
FGLRX ATI 1800XT Low Graphics Mode when using Hardware Drivers Tool
https
I have tried 3 xorg.conf files...here they are:
** Attachment added: "xorg.conf1.txt"
http://launchpadlibrarian.net/19434644/xorg.conf1.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of
** Attachment added: "xorg.conf2.txt"
http://launchpadlibrarian.net/19434649/xorg.conf2.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: "xorg.conf3.txt"
http://launchpadlibrarian.net/19434661/xorg.conf3.txt
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I can confirm grub displays as expected and I can use the virtual
terminals when ubuntu has loaded
--
X won't start in 8.10 - D945GCLF & Panasonic TV
https://bugs.launchpad.net/bugs/293041
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi,
I have installed this kernel on my server and enabled the on board LAN
that was causing the problem.
I haven't yet attempted to use the port for connectivity but I did
notice that the drops was ranking up very quickly (millions per second).
This is without any cable plugged in. I then config
** Attachment added: "networkdriverswitch"
http://launchpadlibrarian.net/21850721/networkdriverswitch
--
Onboard Ethernet does not work on D945GCLF under 2.6.27-9-generic or
2.6.27-11-generic
https://bugs.launchpad.net/bugs/323558
You received this bug notification because you are a member
1 - 100 of 138 matches
Mail list logo
