Thank you very much!
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
Yeah, i think this might have something to do with xine as giving the
sub-thread a better nice value improves stability. I'll also try mplayer
and vlc options. Thanks for your help and go on with the good work, i
really like me-tv.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Thank you very much!
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
Yeah, i think this might have something to do with xine as giving the
sub-thread a better nice value improves stability. I'll also try mplayer
and vlc options. Thanks for your help and go on with the good work, i
really like me-tv.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net
Thank you very much!
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
Yeah, i think this might have something to do with xine as giving the
sub-thread a better nice value improves stability. I'll also try mplayer
and vlc options. Thanks for your help and go on with the good work, i
really like me-tv.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
Yeah, i think this might have something to do with xine as giving the
sub-thread a better nice value improves stability. I'll also try mplayer
and vlc options. Thanks for your help and go on with the good work, i
really like me-tv.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net
Thank you very much!
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Thank you very much!
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
Yeah, i think this might have something to do with xine as giving the
sub-thread a better nice value improves stability. I'll also try mplayer
and vlc options. Thanks for your help and go on with the good work, i
really like me-tv.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net
Ok installed revision 409:
Well, unfortunately that didnt change much for me.
BTW - I receive 45 stations over 9 networks. This is surely a reason for long
response times.
now i receive new messages like these:
29.04.2009 23:29:01: *** 'channel' REPLACE
29.04.2009 23:29:01: *** 'channel' STEPPI
Sounds good, i want to give it a try. Which libsqlite version should be
installed?
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
0.8.7: The epg database seems to be filled faster at the beginning while
the interface remains accessible. But after a short time (and switching
the channel) the gui locks and takes too much cpu-time (my whole system
got locked one time) for some minutes (until the database ist filled).
This could
PS:
After the database is filled everything runs smoothly
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu
0.8.7 with 406_405.diff:
The first channel plays but after switching channel I had to kill it
after 20 mins while getting constantly these two messages:
28.04.2009 20:47:21: No output connected
28.04.2009 20:47:21: Writing PAT/PMT header
I also installed the newer libsqlite from sid but i didnt
> Are these the same symptoms that the original poster had?
Yes i had the same symptoms. After being away for a week me-tv took a
lot more time to start than under daily usage.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification becau
HI, thx for the advice!
But i already tried that - without changes.
I think this problem is related to the driver and/or xine.
dmesg says:
[ 15.797847] dvb-usb: found a 'WideView WT-220U PenType Receiver
(Typhoon/Freecom)' in warm state.
[ 15.798009] dvb-usb: will use the device's hardware PI
Public bug reported:
Binary package hint: me-tv
Hi,
on Ubuntu 9.04 Beta (Jaunty) me-tv is very slow (compared to previous
versions), the gui often freezes so i have to kill it. If i'm using xine_ui
directly i don't have such problems, but channel locking is also slow.
System Specs:
Pentium M 2
Hi again,
i found out that my me-tv turns gray when updating its EPG data.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-
The .deb download section seems to be broken
Sometimes i receaved messages like this:
04.04.2009 16:30:02: Saving channel 145 (WDR Köln)
04.04.2009 16:30:02: Exception: Lesen der Daten vom Demuxer fehlgeschlagen:
Value too large for defined data type
04.04.2009 16:30:02: Exception in EPG thread:
Hello,
ive logged everything until i had to kill me-tv. Before i first could do
anything in me-tv i had to wait several seconds (i'd say about 20). Is there a
possibility to disable EPG for testing purposes?
regards
** Attachment added: "me-tv.log.tar.bz2"
http://launchpadlibrarian.net/248294
Hi,
thanks! I tried it an until now i didnt run into ui-freezes yet. Only some
channels (like Pro7 and N24) need a little bit more time for channel locking
and are turning the window gray for ~2 seconds, but this is due to signal
quality i guess.
(BTW im using gstreamer engine as xine is muted,
Yes i did (also xine-lib which doenst work for me because of a audio
stream error),
i uncommented line 535 in main_window.cc (epg updates ON) an it runs
good. So i assume the prohibition of the EPG thread did the job.
** Attachment added: "535 ON, 115 OFF"
http://launchpadlibrarian.net/2483174
Now i tried it the other way around with the same results. I'll try it
without changes to make sure whether it is the engine option which fixes
it.
** Attachment added: "535 OFF, 115 ON"
http://launchpadlibrarian.net/24831903/me-tv.log.tar.bz2
--
me-tv unusually slow, often freezes
https://bu
Okay It runs relativly stable with both lines enabled. The window
turned gray after some clicking on the ui. Now i disabled compiz and and
didnt run into freezes yet.
--
me-tv unusually slow, often freezes
https://bugs.launchpad.net/bugs/351510
You received this bug notification because you a
1 - 100 of 102 matches
Mail list logo
