This bug report was marked as Incomplete and has not had any updated
comments for quite some time. As a result this bug is being closed.
Please reopen if this is still an issue in the current Ubuntu release
http://www.ubuntu.com/getubuntu/download . Also, please be sure to
provide any requested in
The 18 month support period for Gutsy Gibbon 7.10 has reached its end of life -
http://www.ubuntu.com/news/ubuntu-7.10-eol . As a result, we are closing the
linux-source-2.6.22 kernel task. It would be helpful if you could test the
new Jaunty Jackalope 9.04 release and confirm if this issue remains
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the
upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would
appreciate it if you could please test this newer 2.6.27 Ubuntu kernel.
There are one of two ways you should be able to test:
1) If you are comfortable
I reconfirm this bug in Kubuntu Gutsy kernel version 2.6.22-15 and add
an additional data point:
If I boot without the kernel option irqpoll, these error messages don't
appear in the kernel log. However, after a while, the CDROM drive stops
responding anyway, and the USB system dies for some reas
With -w, i had some freezes, but not all the time.
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
man hdparm:
-w Perform a device reset (DANGEROUS). Do NOT use this option.
It exists for unlikely situations where a reboot might otherwise be
required to get a confused drive back into a useable state.
Is it really save?
I confirm this bug: when its empty, accidentally my DVD-ROM is going mad, a
A temporary solution :
hdparm -w /dev/xxx
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubu
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
I have had similar problems with gutsy .But on the same ide, I had
another cdrom, after keeping alone the LG cdrom on the IDE it was
working perfectly.
However after upgrade to hardy new bad things came
/dev/hdc replaced with /dev/scd0 and looks like some cd do not work very well,
empty media !
Yes this problem still exists even in Hardy. See my post at
http://ubuntuforums.org/showthread.php?p=4933232#post4933232
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of
I can confirm this defect in Gutsy - I am having exactly the same issue.
I have noted that it only occurs if I boot the system with a disc in the
drive. If I reboot, remove the disc and boot up again, the issue is
resolved and I can start using the drive again.
--
DVD-RW status error: status=0x58
Leann,
Thanks for your follow up: I appreciate the links and your candor.
Compliments to your support for this issue! Off the record, I have
supported Linux, via tech support and, currently, engineering support
for a hardware vendor off and on since 1999.
Installing Gutsy was a very pleasant s
Release notes regarding Alpha4 will be posted here:
http://www.ubuntu.com/testing/ . Also, specific changes to the kernel
can be seen here: https://launchpad.net/ubuntu/+source/linux/ . I now
realize me asking you to test via the LiveCD doesn't make any sense :)
Would you have spare room and an
Leann,
Thanks for your update. I'm glad that a newer version of the Hary
release candidate will be available soon. However, I have a means to
burn DVD's currently and do not want to test out the Hary release
without consideration for its potential impact on my now-working DVD
burning system.
Pr
Hary Alpha4 will be released in a day or so. It will have an updated
version of the kernel. You can download and try the new Hardy Heron
Alpha release from http://cdimage.ubuntu.com/releases/hardy/ . You
should be able to then test the new kernel via the LiveCD. Please
verify if this bug still
** Attachment added: "messages.log"
http://launchpadlibrarian.net/11610264/messages.log
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bu
** Attachment added: "uname-a.log"
http://launchpadlibrarian.net/11610263/uname-a.log
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug
** Attachment added: "lspci-vvnn.log"
http://launchpadlibrarian.net/11610258/lspci-vvnn.log
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this bug notification because you are a member of Ubuntu
Bugs, which is th
All,
The plot thickens. I too encountered the above mentioned failures after
a hard drive failure forced me to update to 7.10. The irony is that I
installed Gutsy from a CDROM burned on the exact hardware/firmware that
now can only brick DVD/CDROM media.
After tweaking many items, each of which
I have the same problem after upgrading from Kubuntu Feisty to Gutsy. I
had been playing around with booting different kernels and noticed this
error with kernel 2.6.22. It didn't seem to happen with earlier
kernels.
uname -a:
Linux kpas1 2.6.22-14-generic #1 SMP Tue Dec 18 05:28:27 UTC 2007 x86
Hi Matthias,
Thanks for the update. However it seems odd that you'd need to
recompile your kernel to enable CONFIG_PATA_JMICRON=m as it appears it
was enabled by default.
Also, for anyone else interested, the Hardy Heron Alpha series was
recently released. Alpha2 and subsequent releases contain
Hi,
for me the problem was solved by compiling my kernel with
"CONFIG_PATA_JMICRON=m"
Now the DVD-RW-Device is no longer detected as /dev/hdb, it is detected
as /dev/scd0 correctly.
My board is a GA-965G-DS3.
Best regards.
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gu
Hi,
I burned successfully a DVD with K3B, I could read the DVD on Windows and
Pardus, but can't read it with kubuntu feisty fawn.
uname -a
Linux berkem-desktop 2.6.20-16-generic #2 SMP Sun Sep 23 19:50:39 UTC 2007 i686
GNU/Linux
dmesg log and lspci output are attached.
Thanks in advance
Berkem
*
Had a very similar problem on a fresh Gutsy ( 2.6.22-14-generic ) install.
DVD burning did not work at all (brasero, gnomebaker)
Finally updated firmware on my GSA-4167B to Dangerous Brothers DL13. Works
like a charm.
I suggest you check for new firmwares.
--
DVD-RW status error: status=0x58 (a
Had a very similar problem on a fresh Gutsy ( 2.6.22-14-generic ) install.
DVD burning did not work at all (brasero, gnomebaker)
Finally updated firmware on my GSA-4167B to Dangerous Brothers DL13. Works
like a charm.
I suggest you check for new firmwares.
--
DVD-RW status error: status=0x58 (a
I have the same problem. After trying to write a DVD with k3b, I could
see the same messages as Achraf in /var/log/messages (except that my
DVD+-RW is hdd, not hdc). After that, no DVD - written or blank - is
recognized in the unit. So I can't read any DVD, nor I can burn another
blank.
It's annoy
** Changed in: linux-source-2.6.22 (Ubuntu)
Importance: Undecided => Medium
Assignee: Brian Murray => Ubuntu Kernel Team
Status: Incomplete => Triaged
--
DVD-RW status error: status=0x58 (after an upgrade from Feity to Gutsy)
https://bugs.launchpad.net/bugs/126898
You received this
Hi Brian !
Thanks for your response ^_^ sorry for the missing files, it's my first
kernel bug report !
The command "uname -a" returns :
Linux myhost 2.6.22-8-generic #1 SMP Thu Jul 12 15:59:45 GMT 2007 i686
GNU/Linux
dmesg.log and lspci-vvnn.log is attached to this comment.
Regards,
Achra
Thanks for taking the time to report this bug and helping to make Ubuntu
better. Unfortunately we can't fix it, because your description doesn't yet
have enough information.
Please include as attachments the following additional information, if you have
not already done so (please pay attention
29 matches
Mail list logo
