I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
** Changed in: gst
Status: New => Invalid
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
NM 0.7 does supports static IP setups properly now in 0.7. I think this
bug is fixed.
** Changed in: network-manager (Ubuntu)
Status: Triaged => Fix Released
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of
I think this bug is not about static IP (i.e. not dhcp) in network manager
but about static(manual, non-roaming) network configuration, this means
-without- network manager.
"Non-roaming" configuration of networking still needs /etc/init.d/networking
restart
for me in Intrepid beta liveCD.
So if
I can reproduce this problem with 7.10 installed on my notebook. eth0 (in my
case) just doesn't come up. a simple
$ sudo ifup eth0
is enough to make it work with a static ip.
** Changed in: gnome-system-tools (Ubuntu)
Status: New => Confirmed
--
Static network settings while in livecd do
I've sent the bug upstream on
http://bugzilla.gnome.org/show_bug.cgi?id=485683. The issue is somewhat
due to network-manager it doesn't happen when it's not running
** Changed in: gnome-system-tools (Ubuntu)
Importance: Undecided => Low
Assignee: (unassigned) => Ubuntu Desktop Bugs (deskto
upstream comment
"gnome-system-tools just modifies the interface configuration file(s) and runs
ifup immediately on it in this case. I faced myself this problem a few times
some time ago when testing gnome-system-tools/NetworkManager cooperation code,
I found out I could reproduce it through comma
** Changed in: gst
Status: Unknown => New
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are a memb
Same problem, but mine only seems to occur after trying to switch from
wireless to wired connection or vice versa.
It also seems to happen if I switch off my wireless switch on my Dell
D620
--
Static network settings while in livecd do not take effect without complete
restart of network setting
Same problem. After setting static IP from Network Manager I have only
IPv6 address for eth0 interface.
eth0 Link encap:Ethernet HWaddr 00:16:D4:D8:69:1E
inet6 addr: fe80::216:d4ff:fed8:691e/64 Диапазон:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
R
I have also installed Hardy. And the problem seems to be gone for the
first couple of days. But it is the same really. Same thing! I use gksu
/etc/init.d/networking restart to reastart the interfaces. Hate to do it
with this amazing level of automation and comfort in network settings
management in
In installed Hardy (final) the problem is gone for me.
--
Static network settings while in livecd do not take effect without complete
restart of network setting tool and re-assertion of the device checkbox
https://bugs.launchpad.net/bugs/148606
You received this bug notification because you are
66 matches
Mail list logo