*** This bug is a duplicate of bug 98856 ***
https://bugs.launchpad.net/bugs/98856
problem is still present: downloads not faster or around 34 KB/s. Also,
downloads seem to stuck from time to time. Hope you can find a solution
soon? If you need any more information: I will keep the fwcutter
*** This bug is a duplicate of bug 98856 ***
https://bugs.launchpad.net/bugs/98856
Sure, I read that bug report, just thougt different software and another
Broadcom -chip was worth another bug.. ;)
Anyways, dmesg of fwcutter loaded follows the next days, here is lspci
-v:
02:03.0 Network
The noiselevel I cited is the result of a quite remote position from the
AP. Tried right next to the AP (noise level -93dBM) and also different
APs, same problem.
I switched to ndiswrapper yesterday, e voilá: WLAN at fullspeed under
the same conditions as with fwcutter...
--
wireless connection
Ok since on the same conditions you noticed such a difference of speed
with ndiswrapper and the bcm43xxx driver, I think the bug can be
confirmed.
But before that could you give me the output of lspci -nn concerning the
card please? And the dmesg output if you see anything unusual?
Thanks!
**
lspci -nn:
02:03.0 Network controller [0280]: Broadcom Corporation BCM4306
802.11b/g Wireless LAN Controller [14e4:4320] (rev 02)
dmesg with ndiswrapper loaded results in nothing suspicious.
I will deliver the dmesg with fwcutter loaded the next days, if needed (I
assume it is, pls let me know
*** This bug is a duplicate of bug 98856 ***
https://bugs.launchpad.net/bugs/98856
Yes I guess it may be useful to the devs!
I just found you are far from the only one with this problem. In fact a
bug with the very same title exists already, and had some traffic. As a
consequence, I mark
Argh, hit the sent-button too fast:
Well, connection to AP without problems. Though, connection very slow (~30kb/s).
I disabled encryption but problem persists.
In case I forgot some information, please let me know.
Thanks
Gerri
---
iwconfig eth1
eth1 IEEE 802.11b/g ESSID:ABCD
It may not be the problem (driver tends to report not very accurate
stats) but here a -65dBM noise level is very high! Usually on my
different cards, I have -90 and below.
Have you tried on different location / access point?
--
wireless connection with fwcutter bcm4306 very slow
