Public bug reported:
Using stock Gutsy -server kernel or a newly compiled kernel, I get an
Oops during boot. Usually it results in a hang that can be resolved by
killing everything (either CTRL-ALT-DELETE or ALT-SYSRQ-K) then mounting
the filesystems by hand.
dmesg - (using stock kernel)
[ 0.000000] Linux version 2.6.22-14-server ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14
23:34:23 GMT 2007 (Ubuntu 2.6.22-14.46-server)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ece0000 (usable)
[ 0.000000] BIOS-e820: 000000007ece0000 - 000000007ece3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ece3000 - 000000007ecf0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ecf0000 - 000000007ed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 1132MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5590
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Entering add_active_range(0, 0, 519392) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 519392
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 519392
[ 0.000000] On node 0 totalpages: 519392
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2265 pages used for memmap
[ 0.000000] HighMem zone: 287751 pages, LIFO batch:31
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6F40 checksum 0
[ 0.000000] ACPI: RSDP 000F6F40, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 7ECE3040, 003C (r1 GBT GBTUACPI 42302E31 GBTU
1010101)
[ 0.000000] ACPI: FACP 7ECE30C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU
1010101)
[ 0.000000] ACPI: DSDT 7ECE3180, 54DD (r1 GBT GBTUACPI 1000 MSFT
100000C)
[ 0.000000] ACPI: FACS 7ECE0000, 0040
[ 0.000000] ACPI: HPET 7ECE87C0, 0038 (r1 GBT GBTUACPI 42302E31 GBTU
98)
[ 0.000000] ACPI: MCFG 7ECE8840, 003C (r1 GBT GBTUACPI 42302E31 GBTU
1010101)
[ 0.000000] ACPI: APIC 7ECE86C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU
1010101)
[ 0.000000] ACPI: SSDT 7ECE88C0, 019E (r1 PmRef Cpu0Ist 3000 INTL
20040311)
[ 0.000000] ACPI: SSDT 7ECE8D50, 0275 (r1 PmRef CpuPm 3000 INTL
20040311)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 80000000 (gap:
7ed00000:51300000)
[ 0.000000] Built 1 zonelists. Total pages: 515335
[ 0.000000] Kernel command line:
root=UUID=e9f79452-f73b-461b-960b-1dcf6545b77b ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2205.214 MHz processor.
[ 26.431080] Console: colour VGA+ 80x25
[ 26.431292] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 26.431520] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 26.501396] Memory: 2048076k/2077568k available (2047k kernel code, 28220k
reserved, 920k data, 364k init, 1160064k highmem)
[ 26.501403] virtual kernel memory layout:
[ 26.501403] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 26.501404] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 26.501405] vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB)
[ 26.501406] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 26.501407] .init : 0xc03eb000 - 0xc0446000 ( 364 kB)
[ 26.501408] .data : 0xc02ffcc6 - 0xc03e5f04 ( 920 kB)
[ 26.501409] .text : 0xc0100000 - 0xc02ffcc6 (2047 kB)
[ 26.501411] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 26.501440] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 26.501554] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 26.501558] hpet0: 4 64-bit timers, 14318180 Hz
[ 26.652453] Calibrating delay using timer specific routine.. 4412.94
BogoMIPS (lpj=22064737)
[ 26.652476] Security Framework v1.0.0 initialized
[ 26.652480] SELinux: Disabled at boot.
[ 26.652490] Mount-cache hash table entries: 512
[ 26.652575] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001
[ 26.652580] monitor/mwait feature present.
[ 26.652582] using mwait in idle threads.
[ 26.652585] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 26.652587] CPU: L2 cache: 2048K
[ 26.652589] CPU: Physical Processor ID: 0
[ 26.652590] CPU: Processor Core ID: 0
[ 26.652591] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940
0000e39d 00000000 00000001
[ 26.652598] Compat vDSO mapped to ffffe000.
[ 26.652606] Checking 'hlt' instruction... OK.
[ 26.692542] SMP alternatives: switching to UP code
[ 26.692842] Early unpacking initramfs... done
[ 26.929049] ACPI: Core revision 20070126
[ 26.929088] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 26.931160] CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
[ 26.931175] SMP alternatives: switching to SMP code
[ 26.931237] Booting processor 1/1 eip 3000
[ 26.941430] Initializing CPU#1
[ 27.092106] Calibrating delay using timer specific routine.. 4410.37
BogoMIPS (lpj=22051876)
[ 27.092111] CPU: After generic identify, caps: bfebfbff 20100000 00000000
00000000 0000e39d 00000000 00000001
[ 27.092115] monitor/mwait feature present.
[ 27.092118] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 27.092119] CPU: L2 cache: 2048K
[ 27.092121] CPU: Physical Processor ID: 0
[ 27.092122] CPU: Processor Core ID: 1
[ 27.092123] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940
0000e39d 00000000 00000001
[ 27.092612] CPU1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d
[ 27.092628] Total of 2 processors activated (8823.32 BogoMIPS).
[ 27.092770] ENABLING IO-APIC IRQs
[ 27.092935] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 27.312003] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 27.332000] Brought up 2 CPUs
[ 27.374908] migration_cost=25
[ 27.375016] Booting paravirtualized kernel on bare hardware
[ 27.375068] Time: 2:51:59 Date: 10/16/107
[ 27.375083] NET: Registered protocol family 16
[ 27.375149] EISA bus registered
[ 27.375153] ACPI: bus type pci registered
[ 27.381094] PCI: PCI BIOS revision 3.00 entry at 0xfb5e0, last bus=4
[ 27.381096] PCI: Using configuration type 1
[ 27.381097] Setting up standard PCI resources
[ 27.383319] ACPI: EC: Look up EC in DSDT
[ 27.386845] ACPI: Interpreter enabled
[ 27.386849] ACPI: (supports S0 S3 S4 S5)
[ 27.386863] ACPI: Using IOAPIC for interrupt routing
[ 27.391975] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 27.391992] PCI: Probing PCI hardware (bus 00)
[ 27.393195] PCI: Transparent bridge - 0000:00:1e.0
[ 27.393242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 27.393378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 27.393442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 27.393505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 27.393565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 27.406996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14
*15)
[ 27.407080] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14
15)
[ 27.407162] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14
15)
[ 27.407244] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14
15)
[ 27.407325] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[ 27.407415] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14
15)
[ 27.407497] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14
15)
[ 27.407579] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14
15)
[ 27.407662] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 27.407669] pnp: PnP ACPI init
[ 27.407675] ACPI: bus type pnp registered
[ 27.409913] pnp: PnP ACPI: found 14 devices
[ 27.409915] ACPI: ACPI bus type pnp unregistered
[ 27.409919] PnPBIOS: Disabled by ACPI PNP
[ 27.409956] PCI: Using ACPI for IRQ routing
[ 27.409958] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 27.437963] NET: Registered protocol family 8
[ 27.437964] NET: Registered protocol family 20
[ 27.437971] NetLabel: Initializing
[ 27.437972] NetLabel: domain hash size = 128
[ 27.437974] NetLabel: protocols = UNLABELED CIPSOv4
[ 27.437983] NetLabel: unlabeled traffic allowed by default
[ 27.438022] pnp: 00:0a: ioport range 0x400-0x4bf has been reserved
[ 27.438026] pnp: 00:0b: iomem range 0xd0000000-0xdfffffff could not be
reserved
[ 27.438030] pnp: 00:0c: iomem range 0xce000-0xcffff has been reserved
[ 27.438032] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 27.438034] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 27.438036] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 27.441838] Time: tsc clocksource has been installed.
[ 27.441844] Switched to high resolution mode on CPU 0
[ 27.441910] Switched to high resolution mode on CPU 1
[ 27.468237] PCI: Bridge: 0000:00:1c.0
[ 27.468239] IO window: b000-bfff
[ 27.468243] MEM window: disabled.
[ 27.468246] PREFETCH window: disabled.
[ 27.468250] PCI: Bridge: 0000:00:1c.4
[ 27.468252] IO window: c000-cfff
[ 27.468256] MEM window: f0000000-f0ffffff
[ 27.468259] PREFETCH window: disabled.
[ 27.468263] PCI: Bridge: 0000:00:1c.5
[ 27.468265] IO window: d000-dfff
[ 27.468269] MEM window: f1000000-f2ffffff
[ 27.468272] PREFETCH window: 80000000-800fffff
[ 27.468276] PCI: Bridge: 0000:00:1e.0
[ 27.468278] IO window: disabled.
[ 27.468282] MEM window: f3100000-f31fffff
[ 27.468284] PREFETCH window: disabled.
[ 27.468303] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 27.468308] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 27.468322] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) ->
IRQ 16
[ 27.468326] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 27.468342] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) ->
IRQ 17
[ 27.468345] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 27.468354] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 27.468363] NET: Registered protocol family 2
[ 27.591761] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 27.591818] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 27.592376] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 27.592574] TCP: Hash tables configured (established 131072 bind 65536)
[ 27.592577] TCP reno registered
[ 27.631859] checking if image is initramfs... it is
[ 28.099234] Freeing initrd memory: 7188k freed
[ 28.099686] audit: initializing netlink socket (disabled)
[ 28.099699] audit(1195181519.310:1): initialized
[ 28.099748] highmem bounce pool size: 64 pages
[ 28.101176] VFS: Disk quotas dquot_6.5.1
[ 28.101213] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 28.101282] io scheduler noop registered
[ 28.101283] io scheduler anticipatory registered
[ 28.101285] io scheduler deadline registered (default)
[ 28.101295] io scheduler cfq registered
[ 28.101307] Boot video device is 0000:00:02.0
[ 28.101479] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 28.101514] assign_interrupt_mode Found MSI capability
[ 28.101517] Allocate Port Service[0000:00:1c.0:pcie00]
[ 28.101540] Allocate Port Service[0000:00:1c.0:pcie02]
[ 28.101603] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 28.101638] assign_interrupt_mode Found MSI capability
[ 28.101639] Allocate Port Service[0000:00:1c.4:pcie00]
[ 28.101664] Allocate Port Service[0000:00:1c.4:pcie02]
[ 28.101729] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 28.101764] assign_interrupt_mode Found MSI capability
[ 28.101765] Allocate Port Service[0000:00:1c.5:pcie00]
[ 28.101787] Allocate Port Service[0000:00:1c.5:pcie02]
[ 28.101899] isapnp: Scanning for PnP cards...
[ 28.457355] isapnp: No Plug & Play device found
[ 28.472174] Real Time Clock Driver v1.12ac
[ 28.472265] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 28.472351] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.472458] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.472838] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 28.472996] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 28.473494] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 28.473586] input: Macintosh mouse button emulation as /class/input/input0
[ 28.473646] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 28.473647] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 28.480394] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 28.480400] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 28.480510] mice: PS/2 mouse device common for all mice
[ 28.480594] EISA: Probing bus 0 at eisa.0
[ 28.480621] EISA: Detected 0 cards.
[ 28.480686] TCP cubic registered
[ 28.480698] NET: Registered protocol family 1
[ 28.480717] Using IPI No-Shortcut mode
[ 28.480833] Magic number: 15:779:864
[ 28.480874] hash matches device ptyw2
[ 28.481000] Freeing unused kernel memory: 364k freed
[ 28.497119] input: AT Translated Set 2 keyboard as /class/input/input1
[ 28.604463] AppArmor: AppArmor initialized<5>audit(1195181519.810:2):
type=1505 info="AppArmor initialized" pid=1132
[ 28.608444] fuse init (API version 7.8)
[ 28.611610] Failure registering capabilities with primary security module.
[ 28.686442] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 28.686532] ACPI: SSDT 7ECE8CC0, 0087 (r1 PmRef Cpu1Ist 3000 INTL
20040311)
[ 28.686629] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 28.686637] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 28.686646] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 28.696309] md: linear personality registered for level -1
[ 28.698830] md: multipath personality registered for level -4
[ 28.701253] md: raid0 personality registered for level 0
[ 28.704083] md: raid1 personality registered for level 1
[ 28.706423] raid5: automatically using best checksumming function: pIII_sse
[ 28.750823] pIII_sse : 8121.200 MB/sec
[ 28.750825] raid5: using function: pIII_sse (8121.200 MB/sec)
[ 28.920755] raid6: int32x1 866 MB/s
[ 29.090585] raid6: int32x2 868 MB/s
[ 29.260484] raid6: int32x4 648 MB/s
[ 29.430343] raid6: int32x8 582 MB/s
[ 29.600164] raid6: mmxx1 2801 MB/s
[ 29.770040] raid6: mmxx2 3260 MB/s
[ 29.939930] raid6: sse1x1 1890 MB/s
[ 30.109780] raid6: sse1x2 2492 MB/s
[ 30.279637] raid6: sse2x1 3383 MB/s
[ 30.449502] raid6: sse2x2 3795 MB/s
[ 30.449504] raid6: using algorithm sse2x2 (3795 MB/s)
[ 30.449506] md: raid6 personality registered for level 6
[ 30.449507] md: raid5 personality registered for level 5
[ 30.449509] md: raid4 personality registered for level 4
[ 30.464004] md: raid10 personality registered for level 10
[ 30.828936] usbcore: registered new interface driver usbfs
[ 30.828956] usbcore: registered new interface driver hub
[ 30.828972] usbcore: registered new device driver usb
[ 30.829693] USB Universal Host Controller Interface driver v3.0
[ 30.829744] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 30.829753] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 30.829756] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 30.829857] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 1
[ 30.829882] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e300
[ 30.829965] usb usb1: configuration #1 chosen from 1 choice
[ 30.829984] hub 1-0:1.0: USB hub found
[ 30.829988] hub 1-0:1.0: 2 ports detected
[ 30.919313] SCSI subsystem initialized
[ 30.923220] libata version 2.21 loaded.
[ 30.939291] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) ->
IRQ 18
[ 30.939300] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 30.939303] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 30.939322] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 2
[ 30.939347] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e000
[ 30.939416] usb usb2: configuration #1 chosen from 1 choice
[ 30.939439] hub 2-0:1.0: USB hub found
[ 30.939444] hub 2-0:1.0: 2 ports detected
[ 31.049142] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) ->
IRQ 19
[ 31.049152] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[ 31.049162] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 31.049176] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 3
[ 31.049198] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000e100
[ 31.049265] usb usb3: configuration #1 chosen from 1 choice
[ 31.049286] hub 3-0:1.0: USB hub found
[ 31.049290] hub 3-0:1.0: 2 ports detected
[ 31.159083] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 20
[ 31.159089] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 31.159092] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 31.159106] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 4
[ 31.159128] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000e400
[ 31.159199] usb usb4: configuration #1 chosen from 1 choice
[ 31.159216] hub 4-0:1.0: USB hub found
[ 31.159221] hub 4-0:1.0: 2 ports detected
[ 31.218919] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 31.268969] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 21
[ 31.268979] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 31.268989] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 31.269006] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 5
[ 31.269028] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000e500
[ 31.269099] usb usb5: configuration #1 chosen from 1 choice
[ 31.269117] hub 5-0:1.0: USB hub found
[ 31.269123] hub 5-0:1.0: 2 ports detected
[ 31.378933] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 19
[ 31.378947] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 31.378950] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 31.378965] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 6
[ 31.378984] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e600
[ 31.379050] usb usb6: configuration #1 chosen from 1 choice
[ 31.379067] hub 6-0:1.0: USB hub found
[ 31.379071] hub 6-0:1.0: 2 ports detected
[ 31.398544] usb 1-2: configuration #1 chosen from 1 choice
[ 31.489105] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) ->
IRQ 19
[ 31.489114] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 31.489116] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 31.489141] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 7
[ 31.489168] PCI: cache line size of 32 is not supported by device
0000:00:1a.7
[ 31.489172] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf3286000
[ 31.493045] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 31.493118] usb usb7: configuration #1 chosen from 1 choice
[ 31.493139] hub 7-0:1.0: USB hub found
[ 31.493144] hub 7-0:1.0: 6 ports detected
[ 31.519975] usbcore: registered new interface driver hiddev
[ 31.542375] usbcore: registered new interface driver usbhid
[ 31.542381]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c:
v2.6:USB HID core driver
[ 31.598758] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 20
[ 31.598770] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 31.598773] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 31.598796] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 8
[ 31.598820] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 31.598825] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf3285000
[ 31.602702] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 31.602761] usb usb8: configuration #1 chosen from 1 choice
[ 31.602782] hub 8-0:1.0: USB hub found
[ 31.602787] hub 8-0:1.0: 6 ports detected
[ 31.708667] ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 23 (level, low) ->
IRQ 20
[ 31.758768] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]
MMIO=[f3104000-f31047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 31.758827] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 31.758853] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 31.758868] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 31.759050] eth0: RTL8168b/8111b at 0xf88ae000, 00:1a:4d:52:29:1a, XID
38000000 IRQ 17
[ 31.760151] ahci 0000:00:1f.2: version 2.2
[ 31.760165] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 21
[ 31.838480] usb 1-2: USB disconnect, address 2
[ 32.118222] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 32.297862] usb 1-2: configuration #1 chosen from 1 choice
[ 32.313936] input: Logitech Optical USB Mouse as /class/input/input2
[ 32.313954] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on
usb-0000:00:1a.0-2
[ 32.767741] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
impl SATA mode
[ 32.767746] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum
part
[ 32.767753] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 32.768018] scsi0 : ahci
[ 32.768055] scsi1 : ahci
[ 32.768079] scsi2 : ahci
[ 32.768102] scsi3 : ahci
[ 32.768126] scsi4 : ahci
[ 32.768148] scsi5 : ahci
[ 32.768223] ata1: SATA max UDMA/133 cmd 0xf8860100 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 32.768226] ata2: SATA max UDMA/133 cmd 0xf8860180 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 32.768228] ata3: SATA max UDMA/133 cmd 0xf8860200 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 32.768231] ata4: SATA max UDMA/133 cmd 0xf8860280 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 32.768234] ata5: SATA max UDMA/133 cmd 0xf8860300 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 32.768237] ata6: SATA max UDMA/133 cmd 0xf8860380 ctl 0x00000000 bmdma
0x00000000 irq 21
[ 33.077568] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c8972d00001a4d]
[ 33.297306] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.335390] ata1.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 33.335395] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 33.393645] ata1.00: configured for UDMA/133
[ 33.916822] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.954885] ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 33.954889] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 34.013148] ata2.00: configured for UDMA/133
[ 34.536341] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.572580] ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
[ 34.572584] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 34.630841] ata3.00: configured for UDMA/133
[ 34.956014] ata4: SATA link down (SStatus 0 SControl 300)
[ 35.285757] ata5: SATA link down (SStatus 0 SControl 300)
[ 35.615504] ata6: SATA link down (SStatus 0 SControl 300)
[ 35.615616] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA
PQ: 0 ANSI: 5
[ 35.615867] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA
PQ: 0 ANSI: 5
[ 35.616091] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA
PQ: 0 ANSI: 5
[ 35.617212] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 35.617242] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 35.617276] scsi6 : pata_jmicron
[ 35.617393] scsi7 : pata_jmicron
[ 35.617467] ata7: PATA max UDMA/100 cmd 0x0001c000 ctl 0x0001c102 bmdma
0x0001c400 irq 16
[ 35.617469] ata8: PATA max UDMA/100 cmd 0x0001c200 ctl 0x0001c302 bmdma
0x0001c408 irq 16
[ 35.623362] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 35.623371] sd 0:0:0:0: [sda] Write Protect is off
[ 35.623373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 35.623385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.623420] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 35.623427] sd 0:0:0:0: [sda] Write Protect is off
[ 35.623429] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 35.623439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.623442] sda: sda1 sda2 sda3
[ 35.638999] sd 0:0:0:0: [sda] Attached SCSI disk
[ 35.639032] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 35.639040] sd 1:0:0:0: [sdb] Write Protect is off
[ 35.639042] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 35.639052] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.639078] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 35.639085] sd 1:0:0:0: [sdb] Write Protect is off
[ 35.639086] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 35.639096] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.639099] sdb: sdb1 sdb2 sdb3 sdb4
[ 35.679884] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 35.679914] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 35.679921] sd 2:0:0:0: [sdc] Write Protect is off
[ 35.679923] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 35.679934] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.679959] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
[ 35.679965] sd 2:0:0:0: [sdc] Write Protect is off
[ 35.679967] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 35.679977] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 35.679979] sdc: sdc1 sdc2 sdc3
[ 35.694314] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 35.697556] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 35.697571] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 35.697584] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 35.900681] Attempting manual resume
[ 35.900683] swsusp: Resume From Partition 8:19
[ 35.900685] PM: Checking swsusp image.
[ 35.900808] PM: Resume from disk failed.
[ 35.921342] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 35.921347] EXT3-fs: write access will be enabled during recovery.
[ 35.955790] ata7.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-120, 1.22, max
UDMA/66
[ 36.155598] ata7.00: configured for UDMA/66
[ 36.315739] scsi 6:0:0:0: CD-ROM PIONEER DVD-ROM DVD-120 1.22
PQ: 0 ANSI: 5
[ 36.315822] scsi 6:0:0:0: Attached scsi generic sg3 type 5
[ 36.327426] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 36.327431] Uniform CD-ROM driver Revision: 3.20
[ 36.327478] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 37.257559] kjournald starting. Commit interval 5 seconds
[ 37.257576] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 37.257582] ext3_orphan_cleanup: deleting unreferenced inode 2649174
[ 37.265734] ext3_orphan_cleanup: deleting unreferenced inode 2649039
[ 37.274341] EXT3-fs: sda3: 2 orphan inodes deleted
[ 37.274344] EXT3-fs: recovery complete.
[ 37.280030] EXT3-fs: mounted filesystem with ordered data mode.
[ 38.983010] r8169: eth0: link up
[ 38.983015] r8169: eth0: link up
[ 39.800116] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 39.834952] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 39.966461] Linux agpgart interface v0.102 (c) Dave Jones
[ 40.000074] heci: Intel(R) AMT Management Interface - version 3.1.0.31
[ 40.000077] heci: Copyright (c) 2003 - 2007 Intel Corporation.
[ 40.000108] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 40.000113] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 40.000446] heci: link layer has been established.
[ 40.020874] input: PC Speaker as /class/input/input3
[ 40.099541] parport_pc 00:08: reported by Plug and Play ACPI
[ 40.099586] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 40.106005] heci: heci driver initialization successful.
[ 40.130183] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 40.130200] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.276960] md: md0 stopped.
[ 40.339621] md: bind<sdb1>
[ 40.339768] md: bind<sdc1>
[ 40.339910] md: bind<sda1>
[ 40.377707] raid5: device sda1 operational as raid disk 0
[ 40.377709] raid5: device sdb1 operational as raid disk 1
[ 40.377991] raid5: allocated 3163kB for md0
[ 40.377993] raid5: raid level 5 set md0 active with 2 out of 3 devices,
algorithm 2
[ 40.378034] RAID5 conf printout:
[ 40.378035] --- rd:3 wd:2
[ 40.378037] disk 0, o:1, dev:sda1
[ 40.378038] disk 1, o:1, dev:sdb1
[ 40.378061] RAID5 conf printout:
[ 40.378063] --- rd:3 wd:2
[ 40.378065] disk 0, o:1, dev:sda1
[ 40.378066] disk 1, o:1, dev:sdb1
[ 40.378067] disk 2, o:1, dev:sdc1
[ 40.378093] md: recovery of RAID array md0
[ 40.378094] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 40.378096] md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for recovery.
[ 40.378099] md: using 128k window, over a total of 195310080 blocks.
[ 40.378135] md: md1 stopped.
[ 40.651596] hda_codec: Unknown model for ALC882, trying auto-probe from
BIOS...
[ 40.777113] md: bind<sdb2>
[ 40.781585] md: bind<sdc2>
[ 40.805835] md: bind<sda2>
[ 40.830602] raid5: device sda2 operational as raid disk 0
[ 40.830605] raid5: device sdb2 operational as raid disk 1
[ 40.830847] raid5: allocated 3163kB for md1
[ 40.830849] raid5: raid level 5 set md1 active with 2 out of 3 devices,
algorithm 2
[ 40.830893] RAID5 conf printout:
[ 40.830894] --- rd:3 wd:2
[ 40.830895] disk 0, o:1, dev:sda2
[ 40.830897] disk 1, o:1, dev:sdb2
[ 40.830929] RAID5 conf printout:
[ 40.830931] --- rd:3 wd:2
[ 40.830933] disk 0, o:1, dev:sda2
[ 40.830934] disk 1, o:1, dev:sdb2
[ 40.830936] disk 2, o:1, dev:sdc2
[ 40.830951] md: delaying recovery of md1 until md0 has finished (they share
one or more physical units)
[ 40.922307] agpgart: Detected an Intel G33 Chipset.
[ 40.923099] agpgart: No pre-allocated video memory detected.
[ 40.923128] BUG: unable to handle kernel paging request at virtual address
f8b7fffc
[ 40.923189] printing eip:
[ 40.923218] f8a43a84
[ 40.923219] *pdpt = 0000000000004001
[ 40.923254] *pde = 000000001f89c067
[ 40.923284] *pte = 0000000000000000
[ 40.923333] Oops: 0002 [#1]
[ 40.923378] SMP
[ 40.923462] Modules linked in: intel_agp snd_hda_intel parport_pc parport
snd_pcm snd_timer pcspkr heci agpgart psmouse serio_raw shpchp pci_hotplug
evdev snd soundcore snd_page_alloc sr_mod cdrom ata_generic ext3 jbd mbcache sg
sd_mod usbhid hid ahci pata_jmicron libata scsi_mod ohci1394 ieee1394 r8169
ehci_hcd uhci_hcd usbcore raid10 raid456 xor raid1 raid0 multipath linear
md_mod thermal processor fan fuse apparmor commoncap
[ 40.924734] CPU: 1
[ 40.924734] EIP: 0060:[<f8a43a84>] Not tainted VLI
[ 40.924735] EFLAGS: 00010287 (2.6.22-14-server #1)
[ 40.924881] EIP is at intel_i915_configure+0xe4/0x110 [intel_agp]
[ 40.924934] eax: f8b7fffc ebx: 00000000 ecx: fffffffc edx: 35906001
[ 40.924990] esi: f8a489b8 edi: f8a85000 ebp: f8a45f60 esp: f59bbdf4
[ 40.925044] ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
[ 40.925097] Process modprobe (pid: 3656, ti=f59ba000 task=f5b099f0
task.ti=f59ba000)
[ 40.925154] Stack: 00000114 e0000008 01145210 00000000 f5f24580 f8a392f9
df8d0800 000029c2
[ 40.925413] f5f24580 000003ae 00000007 f8a488f4 df8d0800 f8a488c0
df8d0900 c020cc96
[ 40.925666] df8d0848 00000000 f8a488f4 c0264e3e 00200200 df8d0848
f8a488f4 f8a488f4
[ 40.925919] Call Trace:
[ 40.926000] [<f8a392f9>] agp_add_bridge+0x1b9/0x330 [agpgart]
[ 40.926078] [<c020cc96>] pci_device_probe+0x56/0x80
[ 40.926149] [<c0264e3e>] driver_probe_device+0x8e/0x190
[ 40.926222] [<c026508a>] __driver_attach+0x7a/0x80
[ 40.926292] [<c026422a>] bus_for_each_dev+0x3a/0x60
[ 40.926362] [<c0264cb6>] driver_attach+0x16/0x20
[ 40.926431] [<c0265010>] __driver_attach+0x0/0x80
[ 40.926499] [<c02645fa>] bus_add_driver+0x8a/0x1b0
[ 40.926570] [<c020ce43>] __pci_register_driver+0x53/0xa0
[ 40.926641] [<c014a4e1>] sys_init_module+0x151/0x1a00
[ 40.926718] [<c0171c59>] do_mmap_pgoff+0x599/0x7f0
[ 40.926796] [<c010418a>] sysenter_past_esp+0x6b/0xa1
[ 40.926869] [<c02f0000>] svc_disconnect+0x120/0x130
[ 40.926944] =======================
[ 40.926990] Code: a4 f8 39 5e 04 7e 38 8d 0c 9d 00 00 00 00 eb 0d 8d b4 26
00 00 00 00 8b 15 00 19 a4 f8 8b 52 24 89 c8 83 c3 01 03 05 08 94 a4 f8 <89> 10
89 c8 83 c1 04 03 05 08 94 a4 f8 39 5e 04 8b 00 7f d8 e8
[ 40.928447] EIP: [<f8a43a84>] intel_i915_configure+0xe4/0x110 [intel_agp]
SS:ESP 0068:f59bbdf4
[ 41.375696] NET: Registered protocol family 17
[ 41.811843] loop: module loaded
[ 41.860983] lp0: using parport0 (interrupt-driven).
[ 43.268739] Adding 7815612k swap on /dev/sdb3. Priority:-1 extents:1
across:7815612k
[ 45.351437] EXT3 FS on sda3, internal journal
[ 45.802419] kjournald starting. Commit interval 5 seconds
[ 45.802665] EXT3 FS on sdc3, internal journal
[ 45.802671] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.840950] kjournald starting. Commit interval 5 seconds
[ 45.841175] EXT3 FS on sdb4, internal journal
[ 45.841181] EXT3-fs: mounted filesystem with ordered data mode.
[ 45.913541] ReiserFS: md0: found reiserfs format "3.6" with standard journal
[ 45.913554] ReiserFS: md0: using ordered data mode
[ 45.920060] ReiserFS: md0: journal params: device md0, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 45.920301] ReiserFS: md0: checking transaction log (md0)
[ 45.957596] ReiserFS: md0: Using r5 hash to sort names
[ 45.991535] ReiserFS: md1: found reiserfs format "3.6" with standard journal
[ 45.991545] ReiserFS: md1: using ordered data mode
[ 46.022511] ReiserFS: md1: journal params: device md1, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 46.022781] ReiserFS: md1: checking transaction log (md1)
[ 46.070950] ReiserFS: md1: Using r5 hash to sort names
lspci -nn:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller [8086:29c0] (rev 02)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express
Integrated Graphics Controller [8086:29c2] (rev 02)
00:03.0 Communication controller [0780]: Intel Corporation 82G33/G31/P35/P31
Express MEI Controller [8086:29c4] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface
Controller [8086:2916] (rev 02)
00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
port SATA AHCI Controller [8086:2922] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 02)
02:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE controller
[197b:2368]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
04:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
** Affects: ubuntu
Importance: Undecided
Status: New
--
Kernel oops during boot on gutsy server
https://bugs.launchpad.net/bugs/163551
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
