Regarding latest firmware - I am currently testing updated board-2.bin
and firmware-6.bin version 4.4.1.c3 instead of stock 4.4.1 from
https://github.com/kvalo/ath10k-
firmware/tree/master/QCA6174/hw3.0/4.4.1.c3
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
same bug (apparently), killer 1435 QCA6174, upgraded board-2.bin and
fimware-6.bin to the latest available on the ath10k but still experience
disconnection, though with slightly more time in between drops (from
every 1-5 minutes to once every 5-10)
--
You received this bug notification because
Thanks Andre. I am not sure how to confirm whether "the dropouts were happening
exactly after the second group rekeying." The apparent behaviour fit the
descriptions well, so I assumed it might be related.
I saw the following command mentioned (possiblly, for diagnosis), but I was not
clear
Unless your dropouts were happening exactly after the second group
rekeying, it is a different bug that would need its own bug report.
I haven't had any problems with 18.04 or any distro that uses newer
kernels and firmwares (say Arch).
--
You received this bug notification because you are a
Actually, not an upgrade but a downgrade seems to have solved my problem.
I have replaced the firmware file
/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin with
firmware-6.bin_WLAN.RM.4.4.1-00065-QCARMSWP-1
(which is what Ubuntu 17.10 might have had)
and I have not had a single outage after a
I think this bug affects me on Ubuntu 18.04 (it had not when I was on
17.10).
Following instructions for updating firmware at
https://wireless.wiki.kernel.org/en/users/Drivers/ath10k/firmware ,
I have replaced the firmware file
/lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
(which is
@SoundVM, this bug is only about QCA6174, not AR9485, as seen in the bug
report title ("QCA6174 stops working on newer kernels after second group
rekeying").
You may want to submit a new bug report if you want the issue looked
into.
--
You received this bug notification because you are a member
This bug was fixed in the package linux-firmware - 1.157.16
---
linux-firmware (1.157.16) xenial; urgency=medium
* Connection issue in Bluetooth SPP mode between a Dell Edge Gateway 3000
and an HC-05 BT module attached to Arduino Uno (LP: #1738773)
- UBUNTU: linux-firmware:
Hello, the package linux-firmware - 1.169.3 doesn't fix the bug on 17.10 for
me... quite the reverse
The wifi connexion was still very unstable, downgraded until i switched
yesterday to the "kvalo Firmware patches" : no more errors like "ath: phy0: DMA
failed to stop in 10 ms AR_CR=0x0024
@Drew It means that those fixes have now been made available in the
linux-firmware package in xenial-proposed - you don't have to install
the individual files.
In this case, you'll want to remove the files you added under
/lib/firmware, install the updated linux-firmware package, and reboot to
Lukasz, does this mean I shouldn't use the firmware patches provided
here?
https://github.com/kvalo/ath10k-
firmware/blob/master/QCA6174/hw3.0/board-2.bin
https://github.com/kvalo/ath10k-
firmware/blob/master/QCA6174/hw3.0/4.4.1/firmware-6.bin_WLAN.RM.4.4.1-00065-QCARMSWP-1
How can I install
This bug was fixed in the package linux-firmware - 1.169.3
---
linux-firmware (1.169.3) artful; urgency=medium
* QCA6174 stops working on newer kernels after second group rekeying
(LP: #1743279)
- ath10k: QCA6174 hw3.0: update firmware-6.bin to
** Tags removed: verification-needed-artful
** Tags added: verification-done-artful
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
Title:
QCA6174 stops working on newer kernels after second
Tested 1.169.3 from artful-proposed and can confirm it fixes the issue
on 17.10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
Title:
QCA6174 stops working on newer kernels after second
** Tags added: verification-done-xenial
** Tags added: verification-needed-artful
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
Title:
QCA6174 stops working on newer kernels after second
I've been testing version 1.157.16 from xenial-proposed for the last few
hours. It successfully fixes the issue, and I can confirm that the
correct firmware is loaded.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi, I do confrirm that linux-firmware 1.157.16 indeed fixes this
problem, and it doesn't introduce any regression to previous version. My
laptop is a Dell XPS, which includes a Qualcomm Atheros QCA6174 Wireless
Network Adapter.
I am on kernel 4.13.0-32 and by using firmware ver
I will be uploading for artful shortly.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
Title:
QCA6174 stops working on newer kernels after second group rekeying
To manage notifications
What's the status of this for artful? I would prefer not pushing a fix
for xenial without one in artful as users on this upgrade path would
basically get regressions re-introduced. Could someone upload to the
artful queue?
--
You received this bug notification because you are a member of Ubuntu
** Changed in: linux-firmware (Ubuntu Artful)
Importance: Undecided => Medium
** Changed in: linux-firmware (Ubuntu Artful)
Status: Confirmed => Fix Committed
** Changed in: linux-firmware (Ubuntu Artful)
Assignee: (unassigned) => Seth Forshee (sforshee)
--
You received this bug
This was the problem that caused me to roll back to Zesty shortly after
Artful was released. I just redid the upgrade because of the EoL,
expecting that it surely would have been fixed in the meantime, but alas
not.
At least this time I could eventually find a bug and workaround :)
--
You
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: linux-firmware (Ubuntu Artful)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@Seth You might have missed it (there's lots of text here, so it's more
than ok :-) ) but I already had said in one comment here that it affects
Artful as well (and Bionic, of course, but that is still in
development).
Pretty much it affects any distro using a kernel newer than or equal to
4.12.
Added artful nomination based on duplicate bug 1744187.
** Also affects: linux-firmware (Ubuntu Artful)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thanks! I've uploaded linux-firmware 1.157.16, once that hits xenial-
proposed you'll get another request to test the package there.
** Changed in: linux-firmware (Ubuntu Xenial)
Status: Incomplete => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
@Seth All good after a night long connected without interruptions and/or
slowdowns. It's working great.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
Title:
QCA6174 stops working on newer
@Seth I just confirmed that it does fix the bug.
I forced the re-installation of version 1.157.14 and rebooted. I checked
that the old firmware was loaded and that the files in the
/lib/firmware/ath10k/QCA6174/hw3.0/ folder were indeed the ones that
came with the old package. Then I let the bug
@André: I've updated the firmware in the package below. Can you test
this package and confirm it fixes the issue? Thanks!
http://people.canonical.com/~sforshee/lp1743279/linux-
firmware_1.157.16~pre201801170951_all.deb
** Also affects: linux-firmware (Ubuntu Xenial)
Importance: Undecided
AceLan, you can disconsider the last comment. I've found a way to use
mIRC on the web browser and I've contacted the Kernel team there.
They're already looking into this.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Hi there, AceLan,
I've subscribed you to this bug because of 1) I've noticed you reported
another bug, which had a fix submitted to xenial-proposed a few days
ago, and I'm looking for some guidance here on how to have this bug
fixed ASAP (even by me, if it means creating and submitting a new
While this isn't fixed in Ubuntu, users can fix this issue with the
following command:
sudo wget https://github.com/kvalo/ath10k-
firmware/raw/master/QCA6174/hw3.0/4.4.1/firmware-6.bin_WLAN.RM.4.4.1-00051-QCARMSWP-1
-O /lib/firmware/ath10k/QCA6174/hw3.0/firmware-6.bin
** Description changed:
Status changed to 'Confirmed' because the bug affects multiple users.
** Changed in: linux-firmware (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743279
It's important to notice that this bugs affects any post-4.12 kernel, so
it's present in both 16.04.3 HWE and 17.10 versions.
** Description changed:
After upgrading to the 4.13 kernel on Ubuntu 16.04.3, I've noticed my
WiFi would stop working after every 20 minutes or so. The problem
Reading https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-
firmware.git/commit/ath10k/QCA6174/hw3.0/firmware-6.bin?id=96a7402d4172f4786ee93dd9f7cb3f76e1a8025e
it seems the fix for this particular issue was made available in version
WLAN.RM.4.4.1-00051-QCARMSWP-1. Updating board-2.bin
34 matches
Mail list logo
