** Changed in: e2fsprogs (Ubuntu)
Status: Incomplete = Invalid
--
Dapper lvm over software raid kills ext3
https://bugs.launchpad.net/bugs/247318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Looks like a hardware problem to me too.
You could try to isolate one of the servers that has the problem fairly
often, make it run on just one disk for some time (e.g. off office
hours, after the backup). Power off, remove a disk, power on and run
fsck, reboot, simulate some load for some,
Sorry for my weak descriptions.
here is a hopefully better list:
Server 1: (Dapper)
Tyan Tomcat i7230W
3,20GHz Pentium 541 S775
RAID bus controller: Adaptec Serial ATA II RAID 1420SA (weak driver support
known)
4x Samsung 320GB S-ATA2
disk 0+1 as raid 1
disk 2+3 as raid 1
both raid devices in
In my first message I wrote:
I'm using on several servers (5 Servers, 3 have Problems, all with Ubuntu
Dapper) software raids (2-4 S-Ata drives with about 300-500 GB) and an LVM over
it (LVM volumes go from 10GB to 1,5TB). On each LVM volume I'm using Ext3.
As you can see, there is a SCSI System
Sorry, but it would be much more helpful if you could be extremely
precise with your statements; maybe it's an language problem, but some
of your statements, especially your parenthetical comments, are very
hard for me to parse as valid english and then make semantic sense out
of them. For
** Changed in: e2fsprogs (Ubuntu)
Sourcepackagename: None = e2fsprogs
--
Dapper lvm over software raid kills ext3
https://bugs.launchpad.net/bugs/247318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Sure sounds like a hardware problem to me. I'm not sure how you've
concluded that it's not a hardware problem
--
Dapper lvm over software raid kills ext3
https://bugs.launchpad.net/bugs/247318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
1 Server uses Onboard S-Ata Chip, direct use as LVM devices
1 Server uses Onboard S-Ata Chip with software raid (SW-Raid reports no errors)
1 Server with an Adaptech S-ATA Controller with software raid (no SW-Raid
errors, no SMART errors, no dmesg errors)
1 Server with Adaptech U2W SCSI
In your first message, you said only one server has the problem. In
your most recent message, you said all servers have the same problem.
Would you like to clarify exactly what is going on...?
--
Dapper lvm over software raid kills ext3
https://bugs.launchpad.net/bugs/247318
You received this
