*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
Hi Mikko,
Here is a temporary workaround you can try until the kernel is fixed:
sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
Once you run that command, the package should be able to reinstall libsensors4
without any errors using the following command:
sudo aptitude reinstall lib
I'm confirming that running the following commands did succeed without
errors or warnings:
$ sudo /etc/init.d/udev stop && sudo /etc/init.d/udev start
$ sudo aptitude reinstall libsensors4
I had already previously also run
sudo sensors-detect
and loaded required modules (appended to /etc/module
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
** This bug has been marked a duplicate of bug 253786
/dev/.static/dev is mounted ro in intrepid
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug
*** This bug is a duplicate of bug 253786 ***
https://bugs.launchpad.net/bugs/253786
I just ran the install on Jaunty (all current updates as of posting),
and also got:
Setting up libsensors4 (1:3.0.2-2ubuntu2) ...
udev active, devices will be created in /dev/.static/dev/
rm: cannot remove `i
Similar to the problems from bug 295510
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
Hi Mikko,
This appears to be related to bug 253786. Could you please run the
following command and attach it's output to this ticket:
grep static /proc/mounts
This output will help me determine if this is truly related to bug
253786.
Thanks,
Jason
--
libsensors4: setting up (configure) failed
Although the output looks ugly, those messages should be just warnings
lm-sensors should work okay. Did the package install/configuration
actually bail out with an error ? With bluez those message were
supressed (see bug #280360).
Did you run 'sudo sensors-detect' afterwards to actually probe avai
$ grep static /proc/mounts
/dev/disk/by-uuid/c921b2d7-1c30-4f31-97dd-f7795923cac8 /dev/.static/dev ext3
ro,errors=remount-ro,user_xattr,data=ordered 0 0
After reading bug 253786 I think this is the same issue.
I did run "sudo sensors-detect" and it detected some sensors but only
cpu0_vid and cor
Hi Mikko,
This problem may have been resolved in the latest kernel for Intrepid (bug
273601). Can you try upgrading to the latest Intrepid kernel to see if that
resolves the issue?
--
libsensors4: setting up (configure) failed
https://bugs.launchpad.net/bugs/296477
You received this bug notif
Jason, this issue has not been resolved in intrepid's -8 kernel.
/dev/.static/ is still mounted as read-only bind mount. This will be
fixed in jaunty's udev eventually.
I reckon this bug should be marked as a duplicate of bug #253786 if the
problem is only the terminal output which is symptom of i
60 matches
Mail list logo