Sorry for bringing up an old post but I had problems similar to what was
described here.
I was able to "fix" the crackling audio issues using the following lines
in daemon.pa:
high-priority = yes
nice-level = -11
realtime-scheduling = yes
default-fragments = 8
default-fragment-size-msec = 10
Resolved in lucid
** Changed in: pulseaudio (Ubuntu)
Status: Fix Committed = Fix Released
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
thank you!
I generated this bug report:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/507203
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Branch linked: lp:ubuntu/pulseaudio
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have the same problem in Ubuntu 9.10 (32bit) and my ASUS A7n8x Deluxe.
I wanted to try the /etc/pulse/default.pa-hack, but load-module
module-hal-detect is nowhere in this file.
What should I do? Make my own bug-report?
--
Crackling noise after update to pulseaudio
As a general recommendation, if you have different hardware, the cause
of the bugs can be different, so go through the list at
https://wiki.ubuntu.com/DebuggingSoundProblems/KarmicCaveats and see if
anything applies to your situation. If that doesn't help, file a
separate bug using the ubuntu-bug
Having the same problem on Ubuntu 9.10 (64-bit) using the nVidia
Corporation CK804 AC'97 Audio Controller (rev a2). I've spent the last
several days looking at this bug report post by post and trying every
fix recommended and I'm still getting cracks and pops through my
speakers. Do I need to
On Thu, Jan 7, 2010 at 11:46 PM, Luisgmarine wrote:
Having the same problem on Ubuntu 9.10 (64-bit) using the nVidia
Corporation CK804 AC'97 Audio Controller (rev a2). I've spent the last
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this
Has this been solved?
I'm still experiencing problems. Should I take pulseaudio back to a previous
release?
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
@jglass: please file a separate bug and include relevant information
with this terminal command: ubuntu-bug -p pulseaudio
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is
@Mark Falcey
Does using PULSE_NO_SIMD=1 help?
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I have crackling sound with both Jaunty and Karmic but only in my usb
headset and only when the pulseaudio volume control is not active. If i
have the pulseaudio volume control active or even minimized the
crackling goes away. When I close it the crackling comes back gradually
over about 10
Any version of Pulseaudio after 0.9.15-4ubuntu3 (i.e. 0.9.16 and above)
has this problem for me. Regular desktop sounds are about half-half
crackly noise, and MPlayer doesn't play proper sound at all. Downgrading
back to 0.9.15 solves it.
Karmic's official release is awfully close. You'd better
My samsung NC20 after upgrade from 9.04 to 9.10 beta had the same
problem (booting 9.10beta from a life USB-stick was ok).
I removed all the .pulse* files from my home directory and sound was
fully ok after a reboot...
--
Crackling noise after update to pulseaudio
linux-image-2.6.28.15.20 and pulseaudio-1:0.9.14-0ubuntu20.2 here, with
the crackling audio (on a Thinkpad T61p).
The fix that seemed to work for me -- and in fact the only one needed at
all -- was Jonathan's suggestion of adding the position_fix=1 option to
snd_hda_intel.
--
Crackling noise
Also seemed to work for me. Audio device according to lspci is:
01:00.1 Audio device: ATI Technologies Inc R700 Audio Device [Radeon HD 4000
Series]
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 01)
--
Crackling noise after update to
I understand a fix seems to already be in the works, and maybe I'll try again
when Karmic is released, but I wanted to add that when getting this crackling,
pulseaudio cpu usage goes through the roof (a detail I didn't see mentioned).
On my eeepc 900, playing openarena, pulse audio would
On Wed, 2009-09-16 at 18:05 +, mindkeep wrote:
Unfortunately this removes ubuntu-desktop also, but well... oh well.
Thats just a metapackage.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member
I think the important bit is that /etc/X11/Xsession.d/70pulseaudio is
removed and hence pulseaudio is not started with the session. However, I
think I also tried to rm this file (without removing the package) and
found pulseaudio running again.
sudo apt-get remove -purge pulseaudio will remove
I've similar problem with karmic when streaming over network.
Sometimes it works, if there is no other sound playing on server.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which
This symptom should be resolved in karmic when rtkit is usabled (waiting
on merge of FIFO linux patch). In the meantime, one can modify
/etc/security/limits.conf (add the rt-relevant bits; see the ubuntu
studio site).
** Changed in: pulseaudio (Ubuntu)
Status: In Progress = Fix Committed
** Changed in: pulseaudio (Ubuntu)
Assignee: Luke Yelavich (themuso) = (unassigned)
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Ok, it seems Iiriko's workaround worked for my X-Fi. The only thing I
had to do before reinstalling pulseaudio and applying the fixes was
removing pulse folders:
sudo rm -rf /etc/pulse
sudo rm -rf ~/.pulse
The only trouble I have after this is sound in Skype...
$ apt-cache policy pulseaudio:
I mean I had to set it to CreativeX-Fi instead of pulse, I assume it's the same
thing with Farsight options in aMSN.
I'm extremely sorry for double-commenting. Hope my info helps.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug
I'm ashamed, I spoke too early. A reboot brought back crackling and/or
choppy sound, I give up (again). :( I really hope a decent xfi driver
will be released soon.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you
Coming again with good news: I finally made my Sound Blaster Creative X-Fi work
fine with pulseaudio! Here are all steps:
1) Install latest dtchen's test kernel (2.6.28-13-generic
#44~lp345627~crimsun1, at the moment) from here:
http://kernel.ubuntu.com/~dtchen/
2) Add Luke Yelavich's PPA is in
Hello, i`m having troubles with my Fatality X-fi like another person
here
Ara Pulido says :
I was listening to MP3 audio with rhythmbox. When pidgin generated an event (a
buddy logged in), I got the noise :-(
I got the crackling noise only when emesene generate an event (a buddy
logs in out
ag3r, I actually gave up on pulseaudio but I'm aware many people tried
different settings and got it working. In fact, it's a matter of
settings. I'll give it some tries when I'll have some spare time and
hope we'll have our X-Fi working soon with pulse! :P
--
Crackling noise after update to
I resolved the issue by adding the ppa for the most recent release then:
apt-get remove pulseaudio
rm -rf /etc/pulse*
rm ~/.pulse*
apt-get install pulseaudio ubuntu-desktop
2009/6/3 TotoKid toto...@gmail.com
ag3r, I actually gave up on pulseaudio but I'm aware many people tried
Just thought I should add that I had the same problem with crackling
sound and high CPU usage by pulseaudio after update to jaunty, until I
removed the tsched=0 line which fixed the problem.
My soundcard is a Via VT1708/A in an MSI laptop.
Let me know if you would like any more info about my
Here is what happened with me:
Adjusting default-fragments and default-fragment-size-msec in
/etc/pulse/daemon.conf did not work so afterwards I set them back to the
original 8 and 10 respectively.
My in /etc/pulse/default.pa already had load-module module-hal-detect
tsched=0
So I uncommented
On Thu, 14 May 2009, Queeniebee wrote:
So for me the real solution was bringing down master front and
increasing PCM on volume controls
That's only one component (but yes, hardware is involved).
Some people have found they need to adjust resample-method in daemon.conf
as well.
--
Crackling
I just had good success with adding a parameter to /etc/modprobe.d/alsa-
base.conf:
options snd-hda-intel position_fix=1
I got the idea from:
http://ubuntuforums.org/showthread.php?t=843012
And the file located at:
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz (use gunzip to
** Attachment added: default.pa
http://launchpadlibrarian.net/26728549/default.pa
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: .asoundrc
http://launchpadlibrarian.net/26728560/.asoundrc
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Even uninstalling pulseaudio didn't get things going that great.
The audio is still very jerky with any level of system load.
Running 2.6.28-11-generic kernel w/o pulse audio. Stock jaunty alsa.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received
On Mon, May 11, 2009 at 4:13 PM, Jonathan Kyler fblack...@yahoo.com wrote:
Even uninstalling pulseaudio didn't get things going that great.
The audio is still very jerky with any level of system load.
Running 2.6.28-11-generic kernel w/o pulse audio. Stock jaunty alsa.
If you're not using
Or try the 2.6.29 kernel!
Procedure:
- install deb all header
- install deb header x86 (or amd64)
- install deb image x86 (or amd64)
Nvidia modules or others will be re-compile automatically with DKMS when
installing headers, and in the Grub menu (at boot) there will be the new kernel.
Find
I'm planning on reverting to 8.10.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Jonathan, I think removing pulseaudio from your system is the best
option. This is a nice howto:
http://idyllictux.wordpress.com/2009/04/21/ubuntu-904-jaunty-keeping-the-beast-pulseaudio-at-bay/
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received
Having disabled and uninstalled pulseaudio, I still get audio hiccups,
which didn't occur with previous versions of ubuntu.
At best, removing pulseaudio reduced the number of glitches, but they
still occur, and they make listening to anything via streaming
impossible.
--
Crackling noise after
Uninstalling pulse-audio is the only thing that's really worked for me:
sudo apt-get remove libpulse-browse0 libpulse-mainloop-glib0
libpulsecore9 padevchooser paman paprefs pavucontrol pavumeter
pulseaudio pulseaudio-esound-compat pulseaudio-module-gconf pulseaudio-
module-hal
Sorry, I was a little too quick. I had to remove pulseaudio as well to
get proper playback
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hi!
I just re-install Jaunty (64bits). I suceed to make pulse working again doing
this;
- Upgrade Kernel to 2.6.29.2
(http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.29.2/) but this is just
because I wanted to :-)
- Pugrade to pulseaudio v0.9.15 because if it crashs, it restarts
I confirm that Iriiko's solution
(https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/301755/comments/85solves)
my stuttering audio! =]
Thanks!
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member
sorry for the broken link!
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/301755/comments/85
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I fixed my audio by removing alsa
setting pulse to 1,0 in default instead of 0,1
reinstalling alsa
then removing pulse works great absolutely no issue
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member
I'd call it stuttering rather than crackling, but I'm getting similar on
a fresh Jaunty install.
for each stutter, pulseaudio debug gives:
I: module-alsa-sink.c: Underrun!
D: protocol-native.c: Requesting rewind due to end of underrun.
Fiddling with the settings in /etc/pulse/daemon.conf has
Try to change the parameter of the module alsa in default.pa:
This work fine for me on v0.9.15 kernel 2.6.29.1:
load-module module-alsa-sink device=hw:0,0 sink_name=alsa_out fragments=8
fragment_size=2048 tsched=0
--
Crackling noise after update to pulseaudio
dtchen's kernel did not solve pulseaudio issues, in my case. I hope my
info helps.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Since updating from Intrepid to Jaunty I have also experienced crackling noise
every few seconds (not regurally) when using other applications while playing
music. I am using a stock jaunty PulseAudio with stock settings.
I have been running the updated kernel for one hour now: the crackling
I found that fiddling with the sound settings (i.e. switching between
alsa and pulseaudio and playing the test sound until the crackling
disappears) helps: the noise would disappear until next restart.
The ath5k related periodic noise is unrelated to the absence of the
crackling noise while
I have the same crackling sound since I upgraded from Ubuntu Intrepid to Jaunty.
I have a Realtek ALC861 sound card which worked fine in Intrepid after some
tweaking.
Now I can play sounds without problems but there is a periodic crackling
noise (every 60 sec) that comes with a small cpu load
Has anyone besides Ara actually tested the appropriate updated kernel at
http://kernel.ubuntu.com/~dtchen/ ?
There are at least two issues at play for these symptoms. You need to be
testing the above kernel, and you need to be running stock jaunty
PulseAudio. Most importantly, we need to know
Yeah, it's the same to me.
P.S.: Maybe it's because I'm replying from gmail?
2009/4/25 Iriiko ader...@free.fr:
Why there is my mail on your reply??
I use only pulse because of the equalizer, and the fact that you can
control each program volume.
--
Crackling noise after update to
Hi!
Since the 0.9.15, I had to reduce the number of fragment in alsa-sink but
keeping tshed=0 (alsa crash if =1):
load-module module-alsa-sink device=hw:0,0 sink_name=alsa_out fragments=8
fragment_size=2048 tsched=0
But, I did not put tshed=0 on hal detect:
load-module module-hal-detect
Thanks for your hints, Iriiko.
I tried applying the changes to alsa-sink, but not so much has
changed. I guess I'm turning back to alsa, hoping next pulseaudio
release will fix this annoying issue.
2009/4/24 Iriiko ader...@free.fr:
Hi!
Since the 0.9.15, I had to reduce the number of fragment
Why there is my mail on your reply??
I use only pulse because of the equalizer, and the fact that you can
control each program volume.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs,
I upgraded to Jaunty, today, and got choppy sound from pulseaudio
(0.9.14-0ubuntu20). I added Luke Yelavich's PPA to my sources.list to
upgrade it to 0.9.15-0ubuntu1~ppa4 and now I've got choppy *and*
crackling sound. The tsched=0 workaround didn't work for me. I've got a
Creative Sound Blaster
Hi!
I had this problem BUT i found a solution:
File default.pa (in ~/.pulse usually), add tsched=0 to the modules
module-alsa-sink and module-hal-detect (at least, to module-hal-detect):
#here: The sink is used for me, for the module module-ladspa-sink, to equalized
the sound)
load-module
On Fri, 17 Apr 2009, Iriiko wrote:
File default.pa (in ~/.pulse usually), add tsched=0 to the modules
module-alsa-sink and module-hal-detect (at least, to module-hal-detect):
Default jaunty already ships with tsched=0. That parameter is passed to
module-alsa-sink and module-alsa-source from
Hi,
I'm experiencing crackling sound too, in fact I hear only crackling, no sound
or music.
This is the output of alsa_info.sh:
http://www.alsa-project.org/db/?f=486580c016bbb473d5945f92354d6e85cd85daff
Attached also there's my /etc/pulse/default.pa.
Thanks.
** Attachment added:
Oh, forgot to say: I'm using crimsun's kernel packages.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hello,
Today I tested with the latest kernel that Daniel provided and I still
get the crackling noise.
I was listening to MP3 audio with rhythmbox. When pidgin generated an
event (a buddy logged in), I got the noise :-(
a...@sushirider:~$ uname -a
Linux sushirider 2.6.28-12-generic
Please, find a attached all the PA configuration files.
** Attachment added: pulse_conf.tar.gz
http://launchpadlibrarian.net/24737920/pulse_conf.tar.gz
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a
Could you please attach /etc/pulse/default.pa so I can determine whether
you are using glitch free or not?
Thanks.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Changed in: pulseaudio (Ubuntu)
Assignee: Ubuntu Foundations Team (ubuntu-foundations) = Luke Yelavich
(themuso)
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Find my alsa_info.sh output attached.
** Attachment added: alsa-info.txt
http://launchpadlibrarian.net/24619946/alsa-info.txt
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which
Raising 'Master' and lowering 'PCM' didn't help. I still get the noises.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Moving back to In Progress as the released fix doesn't apparently FIX
the issue for everyone.
** Changed in: pulseaudio (Ubuntu)
Status: Fix Released = In Progress
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification
I am still affected by this bug (Jaunty updated March 31st)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
Subsystem: Lenovo ThinkPad T61 [17aa:20ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
when i try to watch a movie, i get
PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND
9716 eugene20 0 214m 5240 3724 S 90
Audio still crackly. When it happens the only way to fix it is to kill
pulseaudio in system monitor and then starting pulseaudio back up. All
updates installed.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are
On Sat, 21 Mar 2009, shane fagan wrote:
Audio still crackly. When it happens the only way to fix it is to kill
pulseaudio in system monitor and then starting pulseaudio back up. All
updates installed.
Try the appropriate kernel at http://kernel.ubuntu.com/~dtchen/ .
--
Crackling noise after
Ill give it a go and give back my results.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Problem solved thanks Daniel T Chen.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
On Sat, 2009-03-21 at 17:45 +, Daniel T Chen wrote:
On Sat, 21 Mar 2009, shane fagan wrote:
Audio still crackly. When it happens the only way to fix it is to kill
pulseaudio in system monitor and then starting pulseaudio back up. All
updates installed.
Try the appropriate kernel at
Cross posting from 335955:
Still seeing buzz/static click using pulseaudio (0.9.14-0ubuntu11).
Mostly for me with web streaming media. System sounds always clear,
along with Rhythmbox, but can hear static sound right now at idle with
no media playing just by moving the mouse around.
Device:
I am still having problems even after the update. My lspci -vvnn is
00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory
Controller [10de:0754] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:360a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV-
This update fixed it for me. Thanks!
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
This bug was fixed in the package pulseaudio - 0.9.14-0ubuntu6
---
pulseaudio (0.9.14-0ubuntu6) jaunty; urgency=low
* 0004_disable_autospawn.patch: Disable this patch. Doing so
allows the daemon to spawn if not already running, which
works around LP: #191027, #204272
*
Removing the tsched=0 results in the return of cracklingso the fix just
addressed the logging issue when tsched=0 was enabled.
On Sun, Feb 15, 2009 at 4:35 PM, Launchpad Bug Tracker
301...@bugs.launchpad.net wrote:
This bug was fixed in the package pulseaudio - 0.9.14-0ubuntu6
I also suffer from this bug.
The tsched=0 workaround doesn't change anything.
This bug appeared on both of my PCs after upgrading to Jaunty.
Intrepid's Pulseaudio was fine.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification
Worked for meNVIDIA Nforce2 ALC650F
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: pulseaudio (Ubuntu)
Status: Confirmed = Fix Committed
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
So what does fix committed mean? I can remove the tsched=0 argument
after receiving this update? Is the update eminent?
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Confirmed. I have the same symptoms. tsched=0 working form me. Sound
card HDA Intel (Alsa mixer) in Asus EEE 900.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Jaunty has a new version of PulseAudio. The below is taken from
https://fedoraproject.org/wiki/Features/GlitchFreeAudio;, perhaps you
can report back if this helped you or not.
The PulseAudio sound server has been rewritten to use timer-based audio
scheduling instead of the traditional
Thanks, I already tried that (tsched=0). But unfortunately, it doesn't
make any difference.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Adjusting default-fragments and default-fragment-size-msec doesn't seem
to have any effect for me.
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Adjust default-fragments and default-fragment-size-msec in
/etc/pulse/daemon.conf.
** Changed in: pulseaudio (Ubuntu)
Importance: Undecided = Low
Status: New = Confirmed
--
Crackling noise after update to pulseaudio
https://bugs.launchpad.net/bugs/301755
You received this bug
Confirming also for my pretty standard Intel AC'97 integrated sound card.
Some applications heavily affected:
* wesnoth
* scummvm
* dosbox
* firefox (e.g. on youtube.com) using swfdec
* pretty much anything using SDL or ALSA directly.
--
Crackling noise after update to pulseaudio
92 matches
Mail list logo
