Ok, so this is what I understand. I am new to the bug tracking
process in Ubuntu. Please bear with me if I sound quite
naive :-)
Jaunty has openchrome:713 in it and they may or may not upgrade
to 737 in Jaunty. The changes required to support NC20 is added
in 737 and later which will go into a
The Samsung NC20 autodetection was added in Openchrome revision 737. In
Jaunty there is only 713. The Samsung NC20 support is available only in
Karmic release.
Please try do the following:
1. Upgrade xserver-xorg-video-openchrome from Karmic
You can download it from:
http://packages.ubuntu.com
Ubuntu 9.04 did not go past the flickering screen during
installation. So I never installed 9.04. That is this bug i.e.
installation media of 9.04, downloaded from Ubuntu website does
not detect the display and ends up in a test pattern in NC20.
Now about 8.04: It installed just fine. It automa
Hi George.
So as I understand the Ubuntu 9.04 Jaunty works fine on your hardware with
Latest trunk Openchrome revision?
The xserver-xorg-video-openchrome package from Karmic should also resolve your
problems.
You can download it from:
http://packages.ubuntu.com/karmic/xserver-xorg-video-openchro
I understand that my card is not supported. I can download the
latest openchrome version and build it once my installation is
successful. But here, I am not able to install the latest Ubuntu
9.04 available from the website. When a card is not detected, I
was expecting that it might be possible
Hi.
Your card is not successfuly detected. This bug was resolved in the latest
openchrome version.
Please build the latest (trunk) revision.
All was described at:
https://help.ubuntu.com/community/OpenChrome
--
Samsung NC20 installation problem(test pattern on screen)
https://bugs.launchpad.net
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/26900679/Xorg.0.log
--
Samsung NC20 installation problem(test pattern on screen)
https://bugs.launchpad.net/bugs/374090
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
It would be valuable to have the xorg.log from jaunty as well even
though I realized that would be pretty hard to get. When you have USB
booted into 9.04 jaunty and you see a distorted screen that looks a bit
like Ubuntu running (not the usplash progress bar), is it then possible
to press CTRL-ALT-
Thanks Bryce. Attached yo will find lspci output and Xorg.0.log
I did not make any local changes to Xorg.conf.
These are taken from my working set up. i.e. 8.04 LTS installed
in my Samsung NC20. This did not fail while installation.
** Attachment added: "bug374090LspciOut.txt"
http://launchpa
Hi geovar,
Please attach the output of `lspci -vvnn`, and attach your /var/log/Xorg.0.log
(and maybe Xorg.0.log.old) file from after reproducing this issue. If you've
made any customizations to your /etc/X11/xorg.conf please attach that as well.
[This is an automated message. Apologies if it
It's xorg's responsibility to arrange for a usable display.
** Package changed: ubiquity (Ubuntu) => xorg (Ubuntu)
--
Samsung NC20 installation problem(test pattern on screen)
https://bugs.launchpad.net/bugs/374090
You received this bug notification because you are a member of Ubuntu
Bugs, which
11 matches
Mail list logo
