dmb: any chance for this to make it upstream 2.26.32? That would
guarantee it will be in the next Ubuntu release in the spring (10.04).
** Changed in: mythbuntu
Status: Confirmed => Triaged
** Changed in: linux (Ubuntu)
Importance: Undecided => High
** Changed in: linux (Ubuntu)
No problem for me but at least to write some words on DVB-Wiki about
this issue. This will avoid many unnecessary time-spending answering the
same question for man y people.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a membe
hi
i will personally confirm this against with the hvr4000 is a few days but
for me there is no great rush, plus, i have other things to do so it's not a
high
priority. as far as the kernel is concerned, the best bet is 2.26.32 or later.
if you wan't success you will need to use the patches in th
All fine, the patch is OK. The question is when it will be integrated in
the kernel? I plan switch back from Debian/Myth 0.22 svn to Mythbuntu
9.10 when it is released. Should I spend days to make it work?
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug noti
OK as usual I was wrong when I said wasn't working.
Applying the patch on a fresh install all work fine.
The reason of the previous fault could be I applied the patch and, without
doing a reboot, I made the update.
Sorry guys.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You
Forgot to say that audio is not present even while watching TV.
dmesg attached
** Attachment added: "dmesg"
http://launchpadlibrarian.net/34513283/dmesg
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs,
I have also a permission issues when reported success with the fix #61
on HVR-4000. I did not want to mention it thinking that it was beyond
the scope of this bug.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubunt
ddafre: Maybe the videocard grabbed your first sound device. Also Darron did
some changes in the sound part of the HVR driver, here everything works fine.
Talking about this here may be too much as that goes to far away from the bug.
You can contact me via icq again if you like.
--
Channel scan
Bad news from here
After a reinstall I applied the patches as of #61 then I run system update.
After the reboot I found no audio were available and gstreamer says
"GStreamer was unable to detect any sound devices. Some sound system specific
GStreamer packages may be missing. It may also be a permi
hi
Thank you Shurik this is good news.
Cheers. bye.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.
I have done a quick test on HVR-4000 using fix described above, it was
successful, but I used debian lenny on quite old kernel with Myth 0.22
svn.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is
While trying to apply the patch to kernel 2.6.32-rc5 I downloaded from
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.32-rc5/ I got the error:
CC [M] /home/dario/v4l-dvb-fixes/v4l/dvbdev.o
/home/dario/v4l-dvb-fixes/v4l/dvbdev.c: In function 'init_dvbdev':
/home/dario/v4l-dvb-fixes/v4l/dvbde
I understand what you say and probably the reason of the blocking
condition was the rewind before the start recording point. That is not a
big problem for me even if I am going to use myth for both live and
recorded programs.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You re
Hi.
When watching TV mythtv will record to disk at all times you
are not watching what directly comes out of the card itself
but a slightly delayed copy.
For this fault to related it would mean that you failed to
change channel and not failed when viewing the recorded
stream, mythtv should pop up a
I don't know it if the behaviour is strictly related to this but yesterday
night I made some tests. One of them got the system blocked. While watching TV
I changed channels 3-4 times then I tried to watch back into the circular
buffer but while rewinding the system got blocked.
When I will be ba
P.S.
Some other investigation and not related to the fault observed here needs
persuing with the hvr1300 IR receiver. Perhaps a new bug needs creating, but
observation so far is that ir-kbd-i2c is not probing correctly unless i2c_scan
is enabled.
bye
--
Channel scan timed out
https://bugs.launchp
hi
Thanks Dario for confirming that this works on the hvr1300.
Now we just need to see if this is also a solution for the hvr4000/3000.
Some further investigation as to the reason for this will now be
in progress. Further to the wild guess above about a timing
issue there may also be API differe
Thanks to a BIG help via chat finally I got it working
I installed from scratch Mythbuntu 9.10 rc 64bits on a system using D945GCLF2
nothing has configured before applying the patch.
Steps have done to gain it to work are
1. add repository deb http://archive.ubuntu.com/ubuntu/ karmic universe main
Oh, and dont forget:
4. make menuconfig
-> Multimedia Support -> DVB/ATSC adapters -> disable FireDTV and FloppyDTV
This is nesecary for a build, as linux-headers is missing some files needed for
this DVB card.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this
ddafre: Seems to me like linux headers are missing. So in my explanation
that step is wrong, as you have to explicitly install the headers to
your kernel.
Try "uname -a" you can then see something like "Linux desktop
2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 x86_64
GNU/Linux"
sorry
rm -Rf /lib/modules/2.6.28-11-generic/kernel/drivers/media/
has been sudo rm -Rf /lib/modules/2.6.31-14-generic/kernel/drivers/media/
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
I tried to patch a fresh install of mythbuntu karmic 64 rc by following almost
all your suggestions
First I had to insert the repository
1. deb http://archive.ubuntu.com/ubuntu/ karmic universe main restricted
multiverse [because build-essential were not found]
2. sudo apt-get install build-essen
Hi. Thanks for testing this.
perform hg pull -u for the fixes repo.
now we will reset dvb-t demod when entering DVB-S.
tell me if this works.
thx
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
Well, I tested the repo. DVB-T works after that but DVB-S has the same "time
out problem" as DVB-T had before applying your instructions. The revert
situation. I need to say that HVR-4000 is very popular card here in Europe
especially among Linux enthusiast. It is a pity if this great card will
Hi.
I am in not a great rush to inspect the HVR-4000, however, the fix
for DVB-T tuning on the HVR1300 by Gunni has also been applied to affect
the HVR3000/4000. If the problem exists on those cards also and it's
then please go ahead right now and test the repo and please success or
failure here. I
As dmb stated he will look into the HVR 4000 problem next week. He is running
this card in his production mythtv-backend, so he has the hardware to test, but
as it is his production server, he needs some time for it.
Maybe next week he got some patches ready for this card.
--
Channel scan timed
HVR-4000 is not working either, I am struggling with it quite a while
now. So I hope the solution described is also working for this card. I
will test it soon.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Some additional/corected info on installation:
1. sudo apt-get install build-essential mercurial linux-headers
2. hg clone http://hg.kewl.org/v4l-dvb-fixes/
3. cd v4l-dvb-fixes
4. make menuconfig
-> Multimedia Support -> DVB/ATSC adapters -> disable FireDTV and FloppyDTV
This is nesecary for a b
Hi
In order to resolve this issue for you a few older patches and the change noted
by Gunni above is now available here:
http://hg.kewl.org/v4l-dvb-fixes/
I will try and give a brief outline of how you install this but please get back
to
me if anything is needs better clarification else fixing.
Hi. Don't worry if you don't quite work out how to get this working
since I will definitely be working on this with one other volunteer
on Saturday. Once we have resolved this properly I will update
this log and give clear instructions as to how to fix this and also
the IR receiver which apparently
Thank you darron
I will give a shot tonight and tell you the results (I hope to because I am a
newbie)
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mail
Hi.
With regard to this fault on the HVR-1300 then I have had
a few patches available since Nov. 2008.
An updated repo from June 2009 is available here:
http://hg.kewl.org/v4l-dvb-hvr-1300/
In theory this repo should work? If anyone can test that
would be great. I do remember seeing the DMA fault b
Hi.
With regard to this fault on the HVR-1300 then I have had
a few patches available since Nov. 2008.
An updated repo from June 2009 is available here:
http://hg.kewl.org/v4l-dvb-hvr-1300/
In theory this repo should work? If anyone can test that
would be great. I do remember seeing the DMA fault b
My present situation is:
Since I have three D945GCLF2 one of them already configured and running with
windows and GBPVR + remote Media MVP that is located in one house. I decided to
convert my home windows GBPVR with the more performant Mythbuntu 9.04.
Unfortunately Kernel doesn't permit to corre
As it seems like a kernel issue, and the patch is unlikely already in
the kernel, you have to patch it yourself for a fast solution.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
mythtv-setup --verbose channelscan,siparser,channel,record
reports
** Attachment added: "ch_scan"
http://launchpadlibrarian.net/34071253/ch_scan
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which
Just to have more information about I tried to install kernel 2.6.32-rc5 on a
not yet configure mythbuntu 9.04 (jaunty). After I got it working I started the
configuration process and... surprise! Channel scan doesn't work even on Jaunty!
As an add also the IR remote stopped working as I already
** Changed in: mythtv
Status: New => Invalid
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.
All right, no problem. Will wait if programmers fix the issue. Anyway I
have an impression that something wrong with the API. Why otherwise scan
works while w-scan not?
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of
@Shurik: Sorry that i cant really help on that, cause it can be different for
that card, and i dont know what i am doing :)
ddafre: As i dont know what i did by reverting that patch, i cant comment on
that. I leave that to the programmers, too
Seems to be a odd timing problem, as for me it worke
For myself w-scan does not find any DVB-T channels while scan works
well.
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubu
If all stated is true I can't figure why by executing the scan command and
outputting the result to channels.conf it finds all channels and if I try to
import the channels.conf just produced I got the channel time out.
For my point of view the bug should resides in channel scan and not on cx88.dv
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
Channel scan timed out
https://bugs.launchpad.net/bugs/439163
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.u
43 matches
Mail list logo
