If it isn't fixed in -12, then I know for sure it is fixed with the
commit I made for the next kernel upload.
Thanks.
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Needs Info = Fix Released
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
-12 does seem to fix it. Thanks very much benc!
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
https://launchpad.net/bugs/90689
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Most likely this is fixed with -12. Can I get this reconfirmed against
2.6.20-12 kernel please?
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Confirmed = Needs Info
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
https://launchpad.net/bugs/90689
--
On 3/15/07, Phillip Lougher [EMAIL PROTECTED] wrote:
Add the following lines to /etc/initramfs-tools/modules
libata
pata_jmicron
ata_piix
ahci
ata_generic
and update your initramfs by running update-initramfs -u
OK, I tried that, still get an oops.
I am not 100% sure that this actually
Still happens when i add nosmp noreplacement
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
https://launchpad.net/bugs/90689
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
And adding pci=noroute does not help either.
Once it is up to initramfs /proc/partitions is empty, as fabbione says
you can't assemble raid arrays out of thin air :)
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
https://launchpad.net/bugs/90689
--
ubuntu-bugs
You have multiple IDE controllers, and one is the JMicron controller
which is causing a lot of problems (bug #84964, etc.).
Your issue sounds very similar to the other bugs raised involving the
JMicron controller. However, it is unclear whether this is a duplicate,
because you're getting an oops
Mithrandir suggests using -9.16 from
https://beta.launchpad.net/ubuntu/+source/linux-source-2.6.20 which
might be what's on the install cd and worth a try
I'll try Phillip's suggestions too
--
Oops while booting herd5 livecd: printk / ide_setup_pci_noise / modprobe
