Hi Jeremy,
It was an auto-generated crash report. If no one else is affected feel
free to close it.
Cheers,
Tomek
--
BUG: scheduling while atomic: java/4300/0x1001
https://bugs.launchpad.net/bugs/460122
You received this bug notification because you are a member of Ubuntu
Bugs, which is
HP Pavilion dv2500 shows the same issue. The acpi=off brings FN+F7/F8
back to life but at the cost of WiFi. I can be a hint but it's not good
enough even as a workaround, as far as I'm concerned.
--
[Karmic Lucid Beta 1] Brightness fn keys lost functionality (Lenovo laptops)
Public bug reported:
hard to say, it has just appeared in the task bar
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be
restarted.
Architecture: i386
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC0: tomek 2988 F
** Attachment added: .etc.asound.conf.txt
http://launchpadlibrarian.net/34340665/.etc.asound.conf.txt
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/34340666/AlsaDevices.txt
** Attachment added: AplayDevices.txt
Hi all,
It works!
I've just disabled Thierry's ppa and installed samba related packages
from intrepid proposed repository - it's all yummy. I can read and write
to NAS drive.
Could anyone else check the intrepid-proposed version of samba?
Thanks,
Tomek
--
gvfsd-smb crashed with SIGSEGV in
Hi all,
It works!
I've just disabled Thierry's ppa and installed samba related packages
from intrepid proposed repository - it's all yummy. I can read and write
to NAS drive.
Could anyone else check the intrepid-proposed version of samba?
Thanks,
Tomek
--
gvfsd-smb crashed with SIGSEGV in
Perhaps the alsa (non-pulse) Digital slider controls analogue
sensitivity (pre-amp)? Marcus' hack adds software amplification - post-
amp at the very end of chain. Basically it's multiplying the samples
(both captured sound and whatever noises/distortions) by some factor.
The later the
Hello Marcus,
Your solution worked for me - both M1330 and M1530 started record loud
and clear.
I guess step 3) was an important one because I've tried it previously
after your earlier post (steps 1, 2 and 2b) on M1330 and it didn't work
than.
Thanks!
Tomek
--
internal mic capture very low
Works for me too.
Good work!
Thanks,
Tomek
2008/12/28 ^_Pepe_^ jose.angel.fernandez.fre...@gmail.com
Hi everyone!
Worked for me, for read AND write into my Conceptronic NAS disk!
Good job guys!
Thanks for all to everyone
Regards
--
gvfsd-smb crashed with SIGSEGV in strlen()
Hello,
It doesn't work for me I'm affraid. I've got Dell XPS M1330.
lspci reports:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
Subsystem: Dell Device 0209
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at febfc000
Works for me too.
Good work!
Thanks,
Tomek
2008/12/28 ^_Pepe_^ jose.angel.fernandez.fre...@gmail.com
Hi everyone!
Worked for me, for read AND write into my Conceptronic NAS disk!
Good job guys!
Thanks for all to everyone
Regards
--
gvfsd-smb crashed with SIGSEGV in strlen()
I've just noticed that adding a parameter to 'ls' has quite interesting
results.
smb: \ ls *.txt
(lists all files)
smb: \ ls test.*
SUCCESS - 0 listing \test.*
smb: \ ls test.txt
cli_list_new: Error: unable to parse name from info level 1
cli_list_new: unable to parse name from info level 1
I'm trying to get some informations from my landrive tech support. I've
provided them with the technical data they have requested (model HD9-U2LA based
on RDC R2882-G chip if anyone's interested) and waiting for a response.
As for the new samba packages:
1. reading seems to work fine now - I
I've just noticed that adding a parameter to 'ls' has quite interesting
results.
smb: \ ls *.txt
(lists all files)
smb: \ ls test.*
SUCCESS - 0 listing \test.*
smb: \ ls test.txt
cli_list_new: Error: unable to parse name from info level 1
cli_list_new: unable to parse name from info level 1
I've upgraded all of my samba packages using the new versions from
https://launchpad.net/~tcarrez/+archive
but iit didn't work for me:
$ smbclient //nas/PUBLIC
Enter tomek's password:
Domain=[ȇ] OS=[] Server=[���]
smb: \ ls
Segmentation fault
Comparing to previous version the line:
I've upgraded all of my samba packages using the new versions from
https://launchpad.net/~tcarrez/+archive
but iit didn't work for me:
$ smbclient //nas/PUBLIC
Enter tomek's password:
Domain=[ȇ] OS=[] Server=[���]
smb: \ ls
Segmentation fault
Comparing to previous version the line:
Yes, it is.
But I'm not sure which way to merge them. Bug 284572 has most of the
data while this one has already 4 duplicates and seems to be the target
for automatically generated bug reports. Any suggestions?
Cheers,
Tomek
--
gvfsd-smb crashed with SIGSEGV in strlen()
Yes, it is.
But I'm not sure which way to merge them. Bug 284572 has most of the
data while this one has already 4 duplicates and seems to be the target
for automatically generated bug reports. Any suggestions?
Cheers,
Tomek
--
gvfsd-smb crashed with SIGSEGV in strlen()
Well, this bug causes crash in libsmbclient accessed through nautilus
while bug 284572 does the same through smbclient. The smbclient gives
some extra hints: weird domain/os/server - probably some parsing error,
info level 1 is, I guess, type of package received from landrive:
$ smbclient
Mine is simply called LanDrive: http://www.usbex.com/landrive/
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.
--
Ubuntu-server-bugs
Mine is simply called LanDrive: http://www.usbex.com/landrive/
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Hi,
There was an update of samba but it still does NOT work for me.
I've got samba and libsmbclient in version 2:3.2.3-1ubuntu3.1 and the
same bug is still present. I've applied my patch and the behaviour is
unchanged. Without the patch it crashes, with the patch it works but no
all files are
Hi,
There was an update of samba but it still does NOT work for me.
I've got samba and libsmbclient in version 2:3.2.3-1ubuntu3.1 and the
same bug is still present. I've applied my patch and the behaviour is
unchanged. Without the patch it crashes, with the patch it works but no
all files are
Hi all,
I can confirm the bug on Dell XPS M1330 and 1530.
The workaround that works for me is to remove pulseaudio from the
system.
I've noticed that after removing puldeaudio alsamixer shows additional
track Digital with settings ranging from -30dB to +30dB. Perhaps
puldeaudio sets the Digital
Here's the quick workaround. I'm neither samba nor Ubuntu developer -
it's just a fix for this particular crash. I haven't go faintest idea
about the actual source of the problem.
$ diff -u samba-3.2.3/source/libsmb/clilist.c
samba-3.2.3/source/libsmb/clilist.c.orig
---
BTW. Could someone from Samba and/or Ubuntu development team take a look
at that and release a proper deb file, please?
Cheers,
Tomek
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Server
I've just noticed the patch is reversed. It should be:
$ diff -u samba-3.2.3/source/libsmb/clilist.c.orig
samba-3.2.3/source/libsmb/clilist.c
--- samba-3.2.3/source/libsmb/clilist.c.orig2008-08-27 12:23:20.0
+0100
+++ samba-3.2.3/source/libsmb/clilist.c 2008-11-16 18:22:03.399036086
Hi,
I've just noticed that my patch stops samba from crashing but not all
flies are visible.
Cheers,
Tomek
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed
Here's the quick workaround. I'm neither samba nor Ubuntu developer -
it's just a fix for this particular crash. I haven't go faintest idea
about the actual source of the problem.
$ diff -u samba-3.2.3/source/libsmb/clilist.c
samba-3.2.3/source/libsmb/clilist.c.orig
---
BTW. Could someone from Samba and/or Ubuntu development team take a look
at that and release a proper deb file, please?
Cheers,
Tomek
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Bugs,
I've just noticed the patch is reversed. It should be:
$ diff -u samba-3.2.3/source/libsmb/clilist.c.orig
samba-3.2.3/source/libsmb/clilist.c
--- samba-3.2.3/source/libsmb/clilist.c.orig2008-08-27 12:23:20.0
+0100
+++ samba-3.2.3/source/libsmb/clilist.c 2008-11-16 18:22:03.399036086
Hi,
I've just noticed that my patch stops samba from crashing but not all
flies are visible.
Cheers,
Tomek
--
smbclient crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/284572
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I took the name from deb file, I hoe it's all right...
** Changed in: samba (Ubuntu)
Assignee: (unassigned) = Ubuntu Development Team (ubuntu-dev)
** Changed in: samba (Ubuntu)
Assignee: Ubuntu Development Team (ubuntu-dev) = Jelmer Vernooij (jelmer)
--
smbclient crashed with SIGSEGV
I took the name from deb file, I hoe it's all right...
** Changed in: samba (Ubuntu)
Assignee: (unassigned) = Ubuntu Development Team (ubuntu-dev)
** Changed in: samba (Ubuntu)
Assignee: Ubuntu Development Team (ubuntu-dev) = Jelmer Vernooij (jelmer)
--
smbclient crashed with SIGSEGV
Hiya,
I'm the original reporter but I can't tell whether the issue still exist
because my old laptop with this ATI card has died some time ago.
Cheers,
Tomek
2008/10/17 Bryce Harrington [EMAIL PROTECTED]
Heya tomek.bury,
We're closing this bug since it is has been some time
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/18616620/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/18616621/Dependencies.txt
** Attachment added: Disassembly.txt
http://launchpadlibrarian.net/18616622/Disassembly.txt
** Attachment
100% reproducable here.
** Changed in: samba (Ubuntu)
Status: New = Confirmed
--
gvfsd-smb crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/264943
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in ubuntu.
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/18616620/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/18616621/Dependencies.txt
** Attachment added: Disassembly.txt
http://launchpadlibrarian.net/18616622/Disassembly.txt
** Attachment
100% reproducable here.
** Changed in: samba (Ubuntu)
Status: New = Confirmed
--
gvfsd-smb crashed with SIGSEGV in strlen()
https://bugs.launchpad.net/bugs/264943
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Hi all,
I'm affraid my old laptop died and the new one doesn't have ATI card.
In my case downgrading to xserver-xorg-video-ati 1:6.6.2-0ubuntu4 (edgy)
fixed the problem.
Cheers,
Tomek
2008/5/24 desperately-trying-to-go-ubuntu [EMAIL PROTECTED]:
wonder if this would help
Hi,
I can't do anything at the moment. My laptop's power supply just broke down,
I have to wait for a replacement.
Cheers,
Tomek
2007/10/26, SteveGotthardt [EMAIL PROTECTED]:
Rats, when I switch to 16bit, the overlay stop working again - I guess I
can switch to 24bit to play vids
--
no
** Attachment added: My xorg.conf
http://launchpadlibrarian.net/10135610/xorg.conf
--
no video overlay on external monitor
https://bugs.launchpad.net/bugs/155157
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
** Attachment added: X log for prevoius (working) version
http://launchpadlibrarian.net/10135640/Xorg.0.log.ok
--
no video overlay on external monitor
https://bugs.launchpad.net/bugs/155157
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
** Attachment added: X log for current (buggy) version
http://launchpadlibrarian.net/10135657/Xorg.0.log.bug
--
no video overlay on external monitor
https://bugs.launchpad.net/bugs/155157
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for
Public bug reported:
Binary package hint: xserver-xorg-video-ati
I could watch video on laptop's panel and on external monitor connected
to laptop's VGA output in fiesty. After upgrading to gutsy the video
overlay stopped working on the external monitor (internal panel shows
video, external
FYI:
1:6.6.2-0ubuntu4 (edgy) is fine
1:6.7.195-1ubuntu2 (gutsy) is broken
--
no video overlay on external monitor
https://bugs.launchpad.net/bugs/155157
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
46 matches
Mail list logo