So, here is an update to the Maverick and Delta 1010lt saga. Did a fresh install a couple of days ago. I didn't have time to look into what was working an wasn't working that night so after the initial install I shut down the machine. I got back to it last night and low and behold sound was working without out any modification other than turning up the volume. I have the on-board card working for system sounds etc and after setting Jack to use the 1010lt I was able to get sound through it with Hydrogen for a test.
Very strange how it just worked this time. I was thinking I would need to implement the following for Jack, but didn't need to. I may need to add the fix for PA to see the 10 channels, but I'll work on that later. /usr/share/alsa/cards/ICE1712.conf)... # # Configuration for the ICE1712 (Envy24) chip # [snip] <confdir:pcm/front.conf> ICE1712.pcm.front.0 { @args [ CARD ] @args.CARD { type string } type route ttable.0.0 1 ttable.1.1 1 slave.pcm { type hw card $CARD } #### fix PA issue #### slave.format S32_LE slave.channels 10 ###################### } Right now the machine is just using the kernel from the default repositories so it is the generic kernel. As far as I can tell the machine is using the nouveau driver for Nvidia. I'm getting the typical problems of X freezing (except the mouse continues to work) and various pixels turning either red or blue. So, I'm not sure which route to go in getting the nvidia cleaned up and stable. I would like to use one of the lowlatency kernels available here: http://launchpad.net/~abogani/+archive/ppa. Not sure the effect of that on Maverick and with the nvidia card. Any suggestions on how to proceed with the nvidia drivers and lowlatency kernel without blowing up what is already working? Thanks for the great help so far. Brian -- Ubuntu-Studio-users mailing list Ubuntu-Studio-users@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-studio-users