Do you need both sound devices? If you only should need the EMU card,
you could disable the on-board sound device, by the BIOS settings.
Theoretically you could use both cards, there's a special bridge
available, but I guess it wouldn't make sense.
--
Ubuntu-Studio-users mailing list
Ubuntu-Stud
On Wed, 2013-07-31 at 08:26 +1200, adam wrote:
> /usr/bin/jackd -dalsa -dhw:1,0 -r44100 -p1024 -n2
You already know how to handle QjackCtl, at least a little bit :). Good!
Is hw:1,0 the EMU card?
Using the "slot" method (the echo command I recommended) you can add any
other card to position 1, a
On Wed, 2013-07-31 at 08:26 +1200, adam wrote:
> No, Audio has been good, no glitches
> ---@---:~$ cat ~/.jackdrc
> /usr/bin/jackd -dalsa -dhw:1,0 -r44100 -p1024 -n2
Then you can try to lower the "-p1024" value, by QjackCtl > Settings >
Frames/Periode. I recommend to use sample rate 48000 instead
> To ensure that the EMU card after each startup is the default card hw:0
> you can run
>
> sudo echo "options snd slots=snd_emu10k1" >> /etc/modprobe.d/alsa-base.conf
>
> or
>
> gksudo gedit /etc/modprobe.d/alsa-base.conf
> and manually add
> options snd slots=snd_emu10k1
>
> to the file.
On Tue, 2013-07-30 at 23:43 +1200, adam wrote:
> :~$ cat /proc/asound/cards
> 0 [Live ]: EMU10K1 - SB Live! [CT4620]
> SB Live! [CT4620] (rev.4, serial:0x211102) at 0xd000, irq 16
>
> 1 [V8237 ]: VIA8237 - VIA 8237
> VIA 8237 with CMI9739 at 0xb800, irq 22
To ensure
Wow. Thank you gentlemen, Ralf, Abe, Adam, Kaj. Just great.
The SB Live card is OK. I can distinguish between it and the
onboard Via chipset. And load Soundfonts into it. I will leave
Pulse Audio as-is for now.
:~$ cat /proc/asound/cards
0 [Live ]: EMU10K1 - SB Live! [CT4620]
A trick I've been using since the forums are down is to Google search my
question and view the cached page.
On Jul 29, 2013 10:29 AM, "Abe Caleb" wrote:
> Adam it depends on what you need to do in Jack.
> I use it for many different scenarios such as mixing a composition from
> LMMS (Linux Multim
Adam it depends on what you need to do in Jack.
I use it for many different scenarios such as mixing a composition from
LMMS (Linux Multimedia Studio) to vocals in Audacity. Or you may want to
record something from YouTube and mix with audio in Audacity.
With Jack you can do this.
There are many ot
P.
E.g. what I already ask to do:
Forwarded Message
To: ubuntu-studio-users@lists.ubuntu.com
Subject: Re: new Studio user writes
Date: Mon, 29 Jul 2013 14:50:29 +0200
You can get some hints on this list.
First of all push
The Alt-Key and F2-key at the same time and then type
xfc
This is how Eliminated Pulse audio from interfering with my Alsa apps:
http://jackaudio.org/routing_alsa
On Mon, Jul 29, 2013 at 8:54 AM, Kaj Ailomaa wrote:
>
>
> On Mon, Jul 29, 2013, at 02:33 PM, Kaj Ailomaa wrote:
>
> > One way to disable the module is to uninstall pulseaudio-module-jack.
My intention is not to increase performance. Pulse Audio was causing too
many problems and interfering with my alsa apps. Now I can run mixxx and
all other apps together, including Firefox, and all audio is working.
On Mon, Jul 29, 2013 at 8:33 AM, Kaj Ailomaa wrote:
>
>
> On Mon, Jul 29, 201
On Mon, Jul 29, 2013, at 02:33 PM, Kaj Ailomaa wrote:
> One way to disable the module is to uninstall pulseaudio-module-jack.
> However, the module only auto loads, if running jackdbus instead of
> jackd - which is the default for qjackctl.
>
I meant to say that jackdbus is default for qjackc
You can get some hints on this list.
First of all push
The Alt-Key and F2-key at the same time and then type
xfce4-terminal
In the terminal emulation type
cat /proc/asound/cards
then mark the output with the mouse, with a right click open a menu to
copy it. Past it to the next mail you send t
On Mon, Jul 29, 2013, at 02:27 PM, Abe Caleb wrote:
> I do not like pulse audio so I disabled it. I only use Jack now.
>
>
Just for your information, disabling pulseaudio won't increase jack
performance, however disabling the module will.
One way to disable the module is to uninstall pulseaud
I do not like pulse audio so I disabled it. I only use Jack now.
On Mon, Jul 29, 2013 at 8:14 AM, Kaj Ailomaa wrote:
>
>
> On Mon, Jul 29, 2013, at 02:02 PM, Abe Caleb wrote:
> > Jack is easy to configure. It is the Pulse audio that can be a real bad
> > player in this.
> >
> > If you like you
On Mon, Jul 29, 2013, at 02:02 PM, Abe Caleb wrote:
> Jack is easy to configure. It is the Pulse audio that can be a real bad
> player in this.
>
> If you like you can install Teamviewer and share you screen where I can
> give you pointers on how to work with Jack and he audio settings.
>
> www
Jack is easy to configure. It is the Pulse audio that can be a real bad
player in this.
If you like you can install Teamviewer and share you screen where I can
give you pointers on how to work with Jack and he audio settings.
www.teamviewer.com - Make sure you get the teamviewer for Linux or Ubun
On Mon, Jul 29, 2013, at 11:35 AM, adam wrote:
> Newly installed 12.04 Studio. And Xfce seems nice.
> I am interested in Audio, primarily.
>
> So, with the U Forums down, where should I start?
>
> There are many apps from the Audio Production menu,
> but I guess mastering patching jack is step
Hi,
there are some information gathered and linked on
https://help.ubuntu.com/community/UbuntuStudio/HowTos and
https://help.ubuntu.com/community/UbuntuStudio/Resources . You could also
log on to the IRC channel #ubuntustudio to ask questions.
http://wiki.linuxaudio.org is also a good resource.
19 matches
Mail list logo
