I think it means 59,94Hz, which's available on Linux too.
And okey, I'll do it, thank you Kai-Heng!
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to mesa in Ubuntu.
https://bugs.launchpad.net/bugs/1871721
Title:
Second Monitor on HDMI blank sc
Here you go
Nicolas
** Attachment added: "dmesg 5.4.42 kernel.txt"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190/+attachment/5392768/+files/dmesg%205.4.42%20kernel.txt
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xo
Public bug reported:
Not sure if the maintainers here are aware of this, but libxft2 has been
misbehaving with emoji for a while. The result is that e.g. st (the
terminal emulator) and gitk crash immediately when trying to render
emoji. Very annoying.
There's an upstream PR in the works here:
htt
** No longer affects: libxcb (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to libxcb in Ubuntu.
https://bugs.launchpad.net/bugs/1878434
Title:
xshape - not able to select area on screen
To manage notifications about this bug go to:
ht
Please run `watch -n0 cat /proc/interrupts`, put finger on the touchpad
and see "AMDI0010:03", "pinctrl_amd" or "MSFT0001:00" increase the
interrupt count rapidly.
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-libinput in Ubu
Public bug reported:
si blocca
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3.1
ProcVersionSignature: Ubuntu 4.4.0-185.215-generic 4.4.224
Uname: Linux 4.4.0-185-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.23
Architecture: amd64
CompizPlugins: No value set for
`/app
AMDI0010:03 and pinctrl_amd are present but the count does not move when
I move finger or click on the touchpad.
Please note I tried to remove my USB Mouse which is responsible for the
high counts on one of xhci_hcd. For this mouse it's moving rapidly.
Two screen captures enclosed.
** Attachment
** Attachment added: "Capture d’écran de 2020-07-15 13-46-14.png"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1887190/+attachment/5392809/+files/Capture%20d%E2%80%99%C3%A9cran%20de%202020-07-15%2013-46-14.png
--
You received this bug notification because you are a member of Ubuntu-X,
Ok, there are four refreshes for 1920x1080:
1920x1080 60.00*+ 59.97 59.96 59.93
What if different one get picked?
** No longer affects: nouveau-firmware (Ubuntu)
** No longer affects: mesa (Ubuntu)
** No longer affects: nvidia-graphics-drivers-440 (Ubuntu)
** Package changed: kernel-packag
Public bug reported:
When I start the computer it loads as it always have but when I use the
dropdowns to get a program it just flashes and loads the top program three or
for times. So I then switch off and reboot, This I do two or three times until
it works properly.
Best Regards
Gordon
Pro
Public bug reported:
When I start the computer it loads as it always have but when I use the
dropdowns to get a program it just flashes and loads the top program three or
for times. So I then switch off and reboot, This I do two or three times until
it works properly.
Best Regards
Gordon
Pro
This bug also affects my laptop touchpad
Lenvo Legion 5-ARH05 5.7.1 Kernel
https://linux-hardware.org/?probe=d449a0b248
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-libinput in Ubuntu.
https://bugs.launchpad.net/bugs/1887190
Public bug reported:
si spegne
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: xorg 1:7.7+13ubuntu3.1
ProcVersionSignature: Ubuntu 4.4.0-185.215-generic 4.4.224
Uname: Linux 4.4.0-185-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.23
Architecture: amd64
CompizPlugins: No value set for
`/app
*** This bug is a duplicate of bug 1887683 ***
https://bugs.launchpad.net/bugs/1887683
** This bug has been marked a duplicate of bug 1887683
I Have no system settings
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https:
Thanks. I am testing XFCE desktop for now.
A brief comment on XFCE experience. The starting size of Xorg process
under XFCE is ~100-130 MB, but after 10 days of usage with mostly
Firefox & terminal windows (multiple windows for each app, and sometimes
pdf viewer [atril]) it grew to 270-300 MB. I
*** This bug is a duplicate of bug 1887710 ***
https://bugs.launchpad.net/bugs/1887710
Public bug reported:
Scenario: 2 users. The first user 1 created during the installation is
working. Then I create a second user 2. I can switch the users at the
beginning then at some point when I try to l
Public bug reported:
Scenario: 2 users. The first user 1 created during the installation is
working. Then I create a second user 2. I can switch the users at the
beginning then at some point when I try to login with user 2 the screen
freezes and one has to do a hard reset.
Last time it happened a
*** This bug is a duplicate of bug 1887710 ***
https://bugs.launchpad.net/bugs/1887710
** This bug has been marked a duplicate of bug 1887710
Freeze when switching users in Kubuntu 20.04
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xor
Public bug reported:
Freezes randomly without any traceable pattern. Windows become unresponsive
while the cursor works.
To unfreeze I have to press the OFF button of my HP ProBook and then click on
"Cancel" in the shutdown dialogue. That unfreezes the windows. May happen
several times per ses
Same problem here with a Dell XPS 15 2 in 1 9575. BIOS version 1.11.
Problem fixed with blacklisting intel_vbtn in /etc/modprobe.d/
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to libinput in Ubuntu.
https://bugs.launchpad.net/bugs/1822394
Title
Public bug reported:
Random freezing-- different freezing every time. I switched GUIs from
Gnome to Cinnamon and it seems to freeze less, but still averaging about
once a day. I cannot reproduce, is random.
ProblemType: Bug
DistroRelease: Ubuntu 20.04
Package: xorg 1:7.7+19ubuntu14
ProcVersionSig
All autopkgtests for the newly accepted linux-aws-5.4 (5.4.0-1020.20~18.04.2)
for bionic have finished running.
The following regressions have been reported in tests triggered by the package:
zfs-linux/0.7.5-1ubuntu16.9 (armhf)
Please visit the excuses page listed below and investigate the fail
Public bug reported:
I use Kubuntu 20.04 on an encrypted disk (LVM).
Problem:
After a standby when you wake up the system with the standby button again, the
screen is for a short moment "scrambled" then the login dialog is presented and
one can log in. This scrambled screen is only a cosmetic p
Meanhile I see that even I have onl one user thefollowinghappens:
I reboot the machine, log in and the log off. The I try to log in with
the finger print reader and the screen freezes. You can move only the
mouse. It can be reproduced every time.
--
You received this bug notification because you
*** This bug is a duplicate of bug 1887658 ***
https://bugs.launchpad.net/bugs/1887658
** This bug has been marked a duplicate of bug 1887658
non risolto
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https://bugs.launchp
Please describe in more words what kind of problem you are experiencing.
** Package changed: xorg (Ubuntu) => ubuntu
** Changed in: ubuntu
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https://
Can you attach a screenshot or photo of the problem?
** Tags added: amdgpu
** Summary changed:
- Scrumbled screen after standby on encrypted system
+ [amdgpu] Scrumbled screen after standby on encrypted system
** Package changed: xorg (Ubuntu) => xserver-xorg-video-amdgpu (Ubuntu)
** Changed i
After such a long period of time you are likely experiencing multiple
leaks from multiple apps. You would need to do exhaustive testing with a
single app over a long period to narrow down which is to blame. It's
probably not worth it, but maybe you can identify the most problematic
apps given more
If the cursor still works then that's Xorg which is still working and
only gnome-shell has frozen or crashed, so...
Thank you for taking the time to report this bug and helping to make
Ubuntu better. It sounds like some part of the system has crashed. To
help us find the cause of the crash please
Thank you for taking the time to report this bug and helping to make
Ubuntu better. It sounds like some part of the system has crashed. To
help us find the cause of the crash please follow these steps:
1. Look in /var/crash for crash files and if found run:
ubuntu-bug YOURFILE.crash
Then tell
I don't quite understand what kind of issue you are describing. Can you
please attach a screenshot/photo/video of the problem?
** Package changed: xorg (Ubuntu) => ubuntu
** Changed in: ubuntu
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubu
Public bug reported:
It more likey flicker more if I watch someting in fullscreen or a
certain image shown is and it starts to flicker a lot out of one where.
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: xorg 1:7.7+19ubuntu7.1
ProcVersionSignature: Ubuntu 4.15.0-101.102-generic 4.15.18
U
*** This bug is a duplicate of bug 1754284 ***
https://bugs.launchpad.net/bugs/1754284
I'm guessing by flicker you mean tearing, which is already covered by
bug 1754284.
** This bug has been marked a duplicate of bug 1754284
Fullscreen windows are tearing in Xorg sessions
--
You received
Next time a freeze happens please:
1. Reboot.
2. Run this command:
journalctl -b-1 > prevboot.txt
and attach the resulting text file here.
** Tags added: amdgpu
** Summary changed:
- Xorg freeze
+ [amdgpu] Xorg freeze
** Package changed: xorg (Ubuntu) => ubuntu
** Changed in: ubuntu
*** This bug is a duplicate of bug 1885087 ***
https://bugs.launchpad.net/bugs/1885087
** This bug has been marked a duplicate of bug 1885087
Can't keep brightness value after reboot/poweroff in some nvidia gfx
--
You received this bug notification because you are a member of Ubuntu-X,
wh
Can you guys please test this commit:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=5f4962dd55d86d6a3ba5ddbfaf2d793e3b676a20
--
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-input-libinput in Ubuntu.
h
36 matches
Mail list logo
