Thanks!
I have already used your precious patch!
Regards Claudia
- Original Message -
From: Tarani, Andrea
To: uClinux development list
Sent: Thursday, June 21, 2007 11:22 AM
Subject: R: [uClinux-dev] Mouting JFFS2 file system
Warning!!
The nand flash driver is bugged
Dear All,
in the folowing command and options what is the mean of local IP and remote
IP, How can i set them and where?
pppd -detach crtscts lock local IP:remote IP /dev/ttyS3 38400
Regards,
-
Yahoo! oneSearch: Finally, mobile search
On Thu, 21 Jun 2007, L M wrote:
Dear All,
in the folowing command and options what is the mean of local IP and
remote IP, How can i set them and where?
pppd -detach crtscts lock local IP:remote IP /dev/ttyS3 38400
Regards,
The local/remote IP addresses in this command are the IP
I am porting an application to uClinux which I want to be able to
control via telnet. Actually, I want to allow multiple simultaneous
telnet sessions that all control the same instance of the program (or
at least the same core of the program). Let me explain...
The original (non uClinux)
At 12:50 PM 6/21/2007, you wrote:
Hi Steve,
What, you give up on RTEMS? ;-)
Or are you like me, working on multiple platforms?
Take care,
-Bob
Multiple platforms. We are still using RTEMS on Coldfire, but are
trying out uClinux on a new Blackfin project. It looks like RTEMS
now
Jivin advan lays it down ...
hi,anybody,
I compile hostapd-0.5.8 upon ixp425 platform with
snapgear-3.3.0(uclinux-2.4.31-uc0), there are so errors as below:
/snapgear/snapgear/tools/ucfront-gcc
/snapgear/toolchain/usr/local/bin/arm-linux-gcc -o hostapd hostapd.o eloop.o
ieee802_1x.o
Hi Faeze,
faeze asdaghi wrote:
I'm using ADI Coyote board with IXP425network processor and snapgear 3.4
with 2.4 kernel.
I ca't reboot my board.I use reboot of busybox.
when it try to reboot. LEDs turn on and off and + shown on screen, but
nothing else happen.
Sounds like a redboot problem
