** Changed in: virtualbox-ose (Ubuntu)
Status: New = Confirmed
--
Video resolution remains at 800x600 in guest with utils installed
https://bugs.launchpad.net/bugs/411521
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Changed in: virtualbox-ose (Ubuntu)
Status: New = Confirmed
--
Host mouse cursor still visible with guest utils
https://bugs.launchpad.net/bugs/411518
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Nothing for Jaunty apparently but for Karmic see the following for info on a
new meta bug if you want to help out:
http://idlethread.blogspot.com/2009/08/touchscreen-fail.html
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug
Amit's steps did not work for my HP Pavilion tx1302au tablet PC. lshal
output attached.
snipped lsusb output:
Bus 001 Device 006: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax
TouchScreen
** Attachment added: lshal output
http://launchpadlibrarian.net/29960382/lshal.out.tar.gz
--
evtouch
i just happened to try netbook remix (UNR) 9.04 on my HP tx1000 series
tx1302au tablet and even the live image boot has touchscreen working
with taps and dragging working, the calibrate tool also works, although
i didnt save and reboot the live session! how/why does UNR work fine
while plain
Tom,
We will try to contact upstream author for any further fixups, but since this
is working quite well anyway,
I hope this evtouch package with your fixes will be included in Jaunty normal
archives, is that correct?
Can you assign this bug to the relevant person(s) so that it gets in for
I tried installing from your PPA xserver-xorg-input-evtouch based on
xf86-input-evtouch - 0.8.8-0ubuntu2+thjaeger1 but the same problem
occurs. While calibration (and also during normal use) the min/max/x/y
numbers printed on screen don't change when tapping/moving the stylus
around, the taps
OK, some progress! When I did a package update it got the thjaeger3
version, then I only restarted X (gdm). Now the taps were also going to
the right locations and the cursor following the pen movements! Except
the calibration was off a little. So I tried running the calibrate tool
and it would
OK I tried running the calibrate tool from the terminal and got the
following output:
r...@silverbird:/usr/lib/xf86-input-evtouch# ./calibrate.sh
calibrate.log
X: warning; process set to priority -1 instead of requested priority 0
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol
OK calibrate works with the cursor in current directory, but only the X
axis (horizontal) portion is correct. The Y axis shows max as 6998 but
doesnt get reset to the actual max which is displaying as 3939. Plus I
think the min Y is also off... as a result tapping the pen anywhere on
the screen
Ok, I edited /etc/evtouch/config and changed the MaxY from 6998 to 3939
and restarted X/GDM but no luck - probably something to do with the
d(x/y) numbers. But I rebooted and reran the calibration and this time
it also detected the MaxY and apparently as a result also set the dy
values much
Here it is...
** Attachment added: xorg log
http://launchpadlibrarian.net/23718691/Xorg.1.0.log
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Still no luck, attaching xorg.1.log again which was run with the -thjaeger2
version of the package, thanks for looking into this!
Same issue, taps are registered but the min_max.cur_x (large negative value)
and min_max.cur_y (zero) numbers remain unchanged where ever I tap or move the
pen...
I tried installing from your PPA xserver-xorg-input-evtouch based on
xf86-input-evtouch - 0.8.8-0ubuntu2+thjaeger1 but the same problem
occurs. While calibration (and also during normal use) the min/max/x/y
numbers printed on screen don't change when tapping/moving the stylus
around, the taps
Did a fresh reinstall of Jaunty alpha 5, the evtouch package isn't
updated and I still see the problem. I'm hoping now that Xorg is stable
at 1.6 released the evtouch package will be fixed any time now.
--
evtouch calibrate tool does not detect mouse position
** Attachment added: xorg.conf
http://launchpadlibrarian.net/21212023/xorg.conf.gz
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: xorg log
http://launchpadlibrarian.net/21212028/Xorg.0.log.gz
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
I'm running Jaunty (alpha3-ish) on an HP Pavilion tx1302au tablet PC.
The calibrate tool that comes with xf86-input-evtouch 0.8.8-ubuntu1 runs
but does not seem to detect mouse position, only the taps are
registered.
As a result, after calibration, tapping anywhere on the
** Attachment added: output of lshal
http://launchpadlibrarian.net/2125/lshal.txt.gz
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: output of lspci -vvvn
http://launchpadlibrarian.net/21212021/lspci-vvvn.txt.gz
--
evtouch calibrate tool does not detect mouse position
https://bugs.launchpad.net/bugs/317127
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
** Attachment added: X log
http://launchpadlibrarian.net/21078058/Xorg.0.log
--
FTBFS: xserver-xorg-input-evtouch binary package not available for install in
Jaunty due to FTBFS in xf86-input-evtouch source package
https://bugs.launchpad.net/bugs/312098
You received this bug notification
Public bug reported:
See https://launchpad.net/ubuntu/+source/xf86-input-
evtouch/0.8.7-4build2/+build/813522
I'm testing Jaunty amd64 on an HP Pavilion tx1302au tablet PC and
noticed this package would not install even though it was updated for
new Xorg server version. Found the build link
22 matches
Mail list logo
