bullitbd wrote:
> Thanks very much - saw that - but it is for x86, not armhf. There are
> actually two, one for ALSA only and one for PortAudio, and both have
> -completely- different library lists.
You didn't say which OS or which audio your version of squeezelite nor
which build options have
A quick, and probably easy to find answer but it's not in the FAQ.
How do I configure piCorePlayer if I don't have a DHCP server and
connected via LAN? I prefer to give my devices static IPs.
Just ordered a RPi+, will try this first and maybe get a HifiBerry later
:)
'last.fm' (http://www.las
Can anybody tell me how to set up windows network access to my USB
attached HDD mounted at /mnt/Disk2 with a top level folder called Music.
I have tried many configurations and read some discussion on this forum
which wasn't conclusive.
I also initially activated Samba Server with a Samba Name o
probedb wrote:
> A quick, and probably easy to find answer but it's not in the FAQ.
>
> How do I configure piCorePlayer if I don't have a DHCP server and
> connected via LAN? I prefer to give my devices static IPs.
>
> Just ordered a RPi+, will try this first and maybe get a HifiBerry later
> :
SamS wrote:
> Use the Information screen in LMS.
Does that enable me to change the IP etc of the player? I've always done
it through the Squeezebox.
'last.fm' (http://www.last.fm/user/probedb)
probedb's Profile: http://f
probedb wrote:
> Does that enable me to change the IP etc of the player? I've always done
> it through the Squeezebox.
No you can't change it through LMS. Once you find the dynamic IP address
vis LMS, log into your router and give the pCP a fixed IP, since LMS
tells you the MAC ID.
---
SamS wrote:
> No you can't change it through LMS. Once you find the dynamic IP address
> vis LMS, log into your router and give the pCP a fixed IP, since LMS
> tells you the MAC ID.
OK, thanks for the info, will give it ago!
'last.fm' (http://www.last.fm/user/probedb)
SamS wrote:
> No you can't change it through LMS. Once you find the dynamic IP address
> vis LMS, log into your router and give the pCP a fixed IP, since LMS
> tells you the MAC ID.
probedb said they do not have DHCP server so I'm not sure if this will
work.
---
ian_heys wrote:
> Can anybody tell me how to set up windows network access to my USB
> attached HDD mounted at /mnt/Disk2 with a top level folder called
> Music.
>
>
Hi Ian, check your PM (private message)
Squeezebox Classic:2; Duet: 1; Boom:1; Touch:1; Wandboard Quad;
Squeezelite.
Server
bpa wrote:
> You didn't say which OS or which audio your version of squeezelite uses
> nor which build options have been chosen - more info always give better
> answers.
>
> If you are building for linux there won't be much difference between arm
> and i686 or any cpu architecture as difference
bullitbd wrote:
> Thanks very much for the response.
>
> And apologize for the omission... Wheezy 7.5 - 3.10.17 (from
> http://www.armhf.com/boards/wandboard/#wheezy) on a wandboard quad.
> Using squeezelite-armv6hf binary as-is from squeezelite-downloads... in
> other players, but no squeezeli
bpa wrote:
> probedb said they do not have DHCP server so I'm not sure if this will
> work.
Yeah, ideally I want to set a static IP on the player. Getting an
address assigned by DHCP and telling it to keep it isn't the same. It's
just I like the keep certain address ranges for certain component/
Triode wrote:
> You will only need the -dev versions to build "compile" squeezelite as
> these include the relevant header files.
>
> If you are just running a pre-built one then install the codecs you use
> (from: libFLAC, libmad/libmpg123, libvorbisfile, libfaad) and run the
> prebuilt binary
bullitbd wrote:
> Thanks, Triode. -dev makes sense then.
>
> Have you messed enough with a Wandboard (really the iMX6 part...) to
> have a preferred OS? or one in general for running LMS, SL and file
> service?
>
> Thanks again for all your remarkable work!
I'm not really convinced of the
probedb wrote:
> Yeah, ideally I want to set a static IP on the player. Getting an
> address assigned by DHCP and telling it to keep it isn't the same. It's
> just I like the keep certain address ranges for certain component/device
> types on my network.
Hi probedb,
I'm a bit old school as well
SamS wrote:
> Confirmed, I had the same issue. Removing the spaces did fix.
+1
I have found where the problem is but it's not a simple fix.
You can use underscores "_" instead of spaces for the time being. They
seem to work properly.
regards
Greg
Greg Erskine wrote:
> Hi probedb,
>
> I'm a bit old school as well and like to assign static IP to my devices,
> but you can use DCHP and your router to do this.
>
Thanks Greg, I'll give it a go. I've had issues with devices not showing
as connected on routers before but I've not paid much att
Greg Erskine wrote:
> +1
>
> I have found where the problem is but it's not a simple fix.
>
> You can use underscores "_" instead of spaces for the time being. They
> seem to work properly.
>
> regards
> Greg
The funny thing is that special characters do work (i.e. I have one
called piCorePla
While my orginal squeezeboxes can play perfect in sync, my picoreplayer
with hifiberry DAC is always slightly out of sync. It's really a
fraction of a second, but noticeable . Is somebody else experiencing
this?
Is there a way to fix it?
LMS 7.7.3, Picoreplayer 1.18, connected bij ethernet.
---
Triode wrote:
> This sounds like a problem with a reboot command not actually rebooting
> the device. Glad you fixed it.
...just for the record, rebooting from debian or doesn't work either
(other than pressing the reset key)... it appears to be wand related -
unless you don't have personally t
I've added an installer for the Raspberry Pi - this takes a little
longer to install than the other devices due to slower cpu, but it
should install in ~30 mins.
Interested in anyone testing it:
Code:
https://github.com/SqueezeOnArch/soa-installers/raw/master/soa-im
Triode wrote:
> I'm not really convinced of the difference between OSs - I am using arch
> at present, but mainly because of the small basic install and ability to
> script source builds of additional components. (see SoA thread).
Thanks. Might give that a go.
---
Triode wrote:
> You will only need the -dev versions to build "compile" squeezelite as
> these include the relevant header files.
>
> If you are just running a pre-built one then install the codecs you use
> (from: libFLAC, libmad/libmpg123, libvorbisfile, libfaad) and run the
> prebuilt binary
johtem wrote:
> While my orginal squeezeboxes can play perfect in sync, my picoreplayer
> with hifiberry DAC is always slightly out of sync. It's really a
> fraction of a second, but noticeable . Is somebody else experiencing
> this?
> Is there a way to fix it?
> LMS 7.7.3, Picoreplayer 1.18, co
Greg Erskine wrote:
> hi johtem,
>
> The LMS web interface has synchronising options per player. I haven't
> tried them myself but I think there are there for fine tuning.
>
> regards
> Greg
Thank you.
I think the only option is to set the 'player delay' of all my
squeezeboxes from 0ms to a f
25 matches
Mail list logo