Erik Sjödin wrote:
> Yes I know I can destroy my Pi but it is only 35$ :)
>
> and yes i looked at your circuit but people also say adding resistors
> are not always nessesary so I decided to try without according to this
> guide:
> http://razzpisampler.oreilly.com/ch07.html
>
> "Each GPIO pin
pssc wrote:
> Try 113378 5, will give just under a 4k block per period at 16 44k
Thanks, setting buffer value to 500ms (or even 196608 bytes) seems to
have helped curing this problem.
2167 Alben mit 26564 Titel von 3737 Interpreten.
nietgiftig wrote:
> And the price of a resistor is?
>
> But then again, living on the edge...
>
> But I really hope you are not on the design team of one of my future
> electronics equipment .
> Usual they go bust just after the warranty expires.
> Someone left out a resistor to spare some mone
Hi all; my first post!
I have been following the instructions between posts 21 to 26 (I wanted
to keep the latest version of PiCore I had installed and was using).
However, I am now stuck.
I did this:
cp readsq.py /mnt/mmcblk0p2/tce
sudo /mnt/mmcblk0p2/tce/readsq.py &"
sudo filetool.sh -b
Then
@Ralphy
Did you try your setup with display connected via GPIO?
If yes, did you found a sound difference (e.g. better sound without
display)?
NO
Is your load going up with display to 1-2 (Pi B)?
ON A NON OVERCLOCKED B AND B+, JIVELITE USES ABOUT 60% CPU RUNNING THE
VU METER VISUALIZER IN THE WQV
tang wrote:
> Andrew,
>
> So libc6 was missing, great :)
> I don't use VU meter visualisation but the few I saw wasn't working too
> (both on callumridley and robinwglover repo).
> I will try to remove all visualisations, i just need main playing page
> ;-)
Thanks Tang,
Good to know it isnt ju
Candlemass wrote:
> Is it possible to use a bluetooth transmitter as audio output?
Take a look at this solution from Creative:
http://www.amazon.com/Creative-Bluetooth-Audio-Transmitter-BT-D1/dp/B003FVAQM8
The pairing is done by the external switch on the usb dongle.
Tête à FLAC
2 X SB Cla
Erik Sjödin wrote:
> Yes I know I can destroy my Pi but it is only 35$ :)
>
And the price of a resistor is?
But then again, living on the edge...
But I really hope you are not on the design team of one of my future
electronics equipment .
Usual they go bust just after the warranty expires.
S
Greg Erskine wrote:
> hi Erik Sjödin,
>
> WARNING: You can destroy your Raspberry Pi playing around with the GPIOs
> if you do the wrong thing!!!
>
> Did you look at my circuit? It has resistors!! Very important. A lot of
> people advise using a transistor buffer for extra safety.
>
> For inp
andrewj wrote:
> Thanks Tang,
>
> I'm up and running now, it wasnt the Libc6 libs, i ended up using
> Adafruits Raspbian LCD kernal image, CallumRidleys PiTFT clone of
> Jivelite
> and the following to launch - sudo SDL_VIDEODRIVER=fbcon
> SDL_FBDEV=/dev/fb1 SDL_MOUSEDEV=/dev/input/touchscreen
10 matches
Mail list logo
