newbe_Kriss wrote:
> i have problem, every thing goes ok, screen is in negative how to change
> ?
You may need to slow down the frequency of the display. 'Link'
(https://forums.slimdevices.com/showthread.php?107366-picoreplayer-3-11-waveshare-3-5-TFT-jivelite-Raspberry-Pi-2B&p=936562&viewfull=1#
Hi-
My picoreplayer is a Rasperry Pi 3B+
Everything works great except: the clock displays a time 3hours earlier
than my actual time. If I change the time zone in settings it has no
effect. The same time issue remains (3 hours early).
I have other SB devices running on the same network and with
Hi,+
wlan repeater -> not the best solution
rpi 3 with onboard wlan without an external antenna -> not really a good
solution
both together -> args
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
Vi
I got some files working on the Pi Zero, playing from the laptop. But
there was no sound. In the change Squeezelite settings I tried
changing the output setting from ALSA to hw:CARD=DAC, because Im
using a DAC hat. I saved and rebooted, now it says Squeezelite isnt
running and the pi zero
DJanGo wrote:
> wlan repeater -> not the best solution
But the only possible solution!
DJanGo wrote:
> rpi 3 with onboard wlan without an external antenna -> not really a good
> solution
I tested another Pi 3B+ at the same place but with Raspbian running and
this Pi never had any problems an
AirFiero wrote:
> I got some files working on the Pi Zero, playing from the laptop. But
> there was no sound. In the change Squeezelite settings I tried
> changing the output setting from ALSA to hw:CARD=DAC, because Im
> using a DAC hat.
This is confusing please explain better
Playing f
Jeff07971 wrote:
> This is confusing please explain better
>
> Playing from the laptop. How ?
>
> There was no sound. Where from ?
>
> Jeff
Sorry.
I got file sharing partly set up (some files shared, others not showing
up) from laptop to pi. The file played on the pi, I had headphones
conn
AirFiero wrote:
> Sorry.
>
> I got file sharing partly set up (some files shared, others not showing
> up) from laptop to pi. The file played on the pi, I had headphones
> connected to the pi but there was no sound. I'm wondering if there's
> something that needs to be set in configuration to u
Jeff07971 wrote:
> Again not enough explanation ! Where are these files located on the pi
> or the PC ? where are they not showing up ?
>
> Its SaMBa file sharing its only used to transfer music files to the Pi
>
>
>
> Yes it needs to be set in the GUI but I would have left that untill all
>
Like this ?
27398
and soldered the headers to the boards etc ?
+---+
|Filename: 2019-05-22 19_43_54-Window.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=27398|
+-
Jeff07971 wrote:
> Like this ?
>
> 27398
>
> and soldered the headers to the boards etc ?
The guy at iquaudio put together a special order for me. It's a Pi Zero
with DAC and headphone amp board all presoldered. So unless there's been
a hardware failure, I'm thinking some kind of configuratio
But you said that you'd tried Volumio with it and that worked ?
As I said I'd go back to the start with a clean SD card and go through
step by step and then when it is all working faultfind the audio
output.
Some manfs have a img file for SDcards just to test DACs do IQaudio ?
Jeff
*Players
How many times did you restart Raspbian vs pCP. Your original post said
sometimes...With wifi, intermittent problems are almost always
signal strength issues.Raspbian might have better fault tollerance
with the many daemons running in the background. That is a trade off
when running th
Jeff07971 wrote:
> But you said that you'd tried Volumio with it and that worked ?
>
> As I said I'd go back to the start with a clean SD card and go through
> step by step and then when it is all working faultfind the audio
> output.
>
> Some manfs have a img file for SDcards just to test DAC
Did you use the same audio card on the "another Pi 3B+ at the same place
but with Raspbian"?
Way back, I have seen problems with built-in wifi and some audio cards.
I would just add a USB wifi adaptor in this case and turn off the
built-in wifi.
I can't remember the exact combination of RPi and
Did I mention the "Network wait" command on the [Wifi Settings] page.
This was added for some USB wifi adaptors that were very slow to
negotiate with DHCP. Unlike yours, these adaptors were always slow, not
intermittent.
If you dramatically increase this value it might give you an indication
i
Greg Erskine wrote:
> Did you use the same audio card on the "another Pi 3B+ at the same place
> but with Raspbian"?
No, there is no Audio card. The piCorePlayer Pi has a Hifiberry DAC+
Pro.
carsten_h's Profile: http://f
Greg Erskine wrote:
> Did I mention the "Network wait" command on the [Wifi Settings] page.
I can not find it, even in beta. Is it only available with an external
Wifi adapter?
One thing I didn't mention ist that Bluetooth is switched off.
carsten_h wrote:
> I can not find it, even in beta. Is it only available with an external
> Wifi adapter?
> One thing I didn't mention ist that Bluetooth is switched off.
Sorry for leading you astray, it looks like these feature didn't get
fully into pCP4.1.0.
Can you see if there is a NETWORK
Greg Erskine wrote:
> Scroll down on the [About] page.
I will look for it this evening (GMT+2) when I am back at home.
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread: http://f
Hi-
My picoreplayer is a Rasperry Pi 3B+
Everything works great except: the clock displays a time exactly 3hours
earlier than my actual time. If I change the time zone in settings it
has no effect. The same time issue remains (3 hours early). Also, if I
attempt in a command line to "set" the tim
hi firedog,
Can you start with a fresh pCP image.
Tell us what timezone is automatically set.
Tell us what timezone you think it should be.
regards
Greg
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?
22 matches
Mail list logo
