paul- wrote:
> For those running 64 bit on your pi4's. Have you seen any problems.
> I'm considering making that the regular/only pi4 kernel for pCP.
>
> The only problems I've seen on the RPI forums are mainly related to
> Display drivers and graphical interfaces.
No problems here, but th
nervoteso wrote:
> should i install raspbian os before of can i install directly
> picoreplayer on pi4?
No. piCorePlayer is itself an operating system.
On a Pi4 you need
https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0.zip
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b6 1
should i install raspbian os before of can i install directly
picoreplayer on pi4?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?useri
utgg wrote:
> The "Share Name" in the Picoreplayer settings needs to be the name of
> the share on the NAS, i.e. media in your case (no preceding /).
Thank You :)
Now it is scanning my folders...
. :)
Next exiting thing is to see if all my Trackstat ratings will be
restores correctly :) . It
For those running 64 bit on your pi4's. Have you seen any problems.
I'm considering making that the kernel for pCP.
The only problems I've seen on the RPI forums are mainly related to
Display drivers and graphical interfaces.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homep
kidstypike wrote:
> Sorry, Chrome is affected too, when the Player/Server mode is selected.
Its a font selection.our css is using "font-family: verdana,
arial, sans-serif;" Verdana is on on my linux system, so it uses
arial. Verdana is obviously a "wider" font. I'll make adjustments
Its really not clear
1). Is there a hardware mod or add on board required?
2). If it is just firmware, then where is the source code for the
program to control it?
Or is it just done through an Alsa mixer after the right firmware is
loaded?
piCorePlayer a small player for the Raspberry Pi in
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
>
>
>
> There now appears to be only two lines to comment out, so you can either
> procede
callesoroe wrote:
> Heey That did the trick...
..
>
> Next problem...
>
> I can't see the paths on the NAS...
The path to the musik files is :
> /media/Music/SBMUSIK and playlists /media/Music/SBMUSIK/SQL-playlister
>
> But I can not navigate to them. This is the path I use on the LMS that
Pop the SD card back into a card read and put the reader into a
computer.
Open the boot parttion and then open config.txt in an editor.
Edit the file, save and exit.
28428
There now appears to be only two lines to comment out, so you can either
procede or wait until someone else replies.
ro
bennyboyph wrote:
> Anyone got this working yet?
>
>
>
> Sent from my ONEPLUS A3003 using Tapatalk
Doesn't seem so. Think I'll try my luck on the Khadas forum.
hoverdonkey's Profile: http://forums.slimdevices.com/mem
paul- wrote:
> I have published a new beta
> image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
>
> See info in the
> OP...https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support&p=944664&viewfull=1#post944664
>
> For only
callesoroe wrote:
> Heey That did the trick...
..
>
> Next problem...
>
> I can't see the paths on the NAS...
The path to the musik files is :
> /media/Music/SBMUSIK and playlists /media/Music/SBMUSIK/SQL-playlister
>
> But I can not navigate to them. This is the path I use on the LMS that
utgg wrote:
> Try "vers=1.0" instead. Version 2.0 isn't supported on many older NASes.
Heey That did the trick...…..
Next problem...……
I can't see the paths on the NAS...… The path to the musik files
is : /media/Music/SBMUSIK and playlists
/media/Music/SBMUSIK/SQL-playlister
But I can not na
utgg wrote:
> Try "vers=1.0" instead. Version 2.0 isn't supported on many older NASes.
Good thought, mine is set to vers=1.0, but I get vers=2.0 on the
tooltip.
28421
+---+
|Filename: vers1.jpg
callesoroe wrote:
> If I do this:
>
> 28420
>
> Then I get "host is down" ???
>
> My nas(192.168.1.2) is up. It is playing music right now??? What am I
> doing wrong ??? I use tc and password and I have added "vers=2.0"
>
> The Nas is a ReadyNas Ultra II
Try "vers=1.0" instead. Version 2.0
callesoroe wrote:
> The only password I have on the NAS is the rootpassword. I have tried
> with user root and password, but then I also get "Host is down" ??
I'm getting out of my depth here.
You would probably get more and better help from the pCP devs if you
explained your problem on a dedi
kidstypike wrote:
> The username and password should be that for the share on your NAS.
The only password I have on the NAS is the rootpassword. I have tried
with user root and password, but then I also get "Host is down" ??
Callesoroe
Living room: Transporter, Tact RCS 2.2X digital preamp,
callesoroe wrote:
> If I do this:
>
> 28420
>
> Then I get "host is down" ???
>
> My nas(192.168.1.2) is up. It is playing music right now??? What am I
> doing wrong ??? I use tc and password
The username and password should be that for the share on your NAS.
*Server - LMS 7.9.2 *Pi4B 4GB
kidstypike wrote:
> FWIW here's mine, mount point I've named flatcap, but you can name it
> whatever you wish, it doesn't matter.
>
> 28419
If I do this:
28420
Then I get "host is down" ???
My nas(192.168.1.2) is up. It is playing music right now??? What am I
doing wrong ??? I use tc and pa
20 matches
Mail list logo
